Raktipong Sahamitmongkol
- (2023): Workability, Mechanical Properties, and Microstructure Analysis of Bottom Ash Mortar Reinforced with Recycled Tire Steel Fiber. In: Buildings, v. 13, n. 10 (10 Oktober 2023).
- (2023): Mortar with Internal Curing Bottom Ash for Sand Shortage and Proper Curing. In: Buildings, v. 13, n. 3 (26 Februar 2023).
- Prevention of Concrete Breakout Failure of Expansion Anchor in Tension by Post-installed Reinforcement: Discrete Analysis and Experiment. In: Case Studies in Construction Materials, v. 17 (Dezember 2022). (2022):
- A comparison of punching shear strengthening of RC flat plates with FRP bars and steel bolts. In: Case Studies in Construction Materials, v. 16 (Juni 2022). (2022):
- Post-installed anchors in concrete strengthened by post-installed reinforcement under tensile load. In: European Journal of Environmental and Civil Engineering, v. 26, n. 13 (Juli 2021). (2021):
- Discrete mesoscale analysis of adhesive anchors under tensile load taking into account post-installed reinforcement. In: Construction and Building Materials, v. 262 (November 2020). (2020):
- A method to detect lap splice in reinforced concrete using a combination of covermeter and GPR. In: Construction and Building Materials, v. 173 (Juni 2018). (2018):
- A new method to determine locations of rebars and estimate cover thickness of RC structures using GPR data. In: Construction and Building Materials, v. 140 (Juni 2017). (2017):
- Flexural Behavior of Corroded RC Members with Patch Repair - Experiments & Simulation. In: Journal of Advanced Concrete Technology, v. 6, n. 2 ( 2008). (2008):
- Tension stiffening effect and bonding characteristics of chemically prestressed concrete under tension. In: Materials and Structures, v. 44, n. 2 (März 2011). (2011):
- Carbonation resistance of concrete with crystalline material coating. In: Magazine of Concrete Research, v. 63, n. 8 (August 2011). (2011):
- Damage analysis of an RC column subjected to long-term transient elevated temperature. In: Structure and Infrastructure Engineering, v. 7, n. 12 (Dezember 2011). (2011):