Tommaso Rotunno 
- (2024): Semi-analytical approach for curved masonry pillars reinforced with FRCM. In: Composite Structures, v. 337 (Juni 2024).
- (2023): Modeling of shear-lap tests of flat and curved masonry specimens strengthened by FRCM. In: Structures, v. 52 (Juni 2023).
- (2023): FRCM-to-masonry bonding behaviour in the case of curved surfaces: experimental investigation. In: Composite Structures, v. 313 (Juni 2023).
- (2022): Numerical study of the effect of Post-Liquefaction settlements on the response of infilled RC-frames. In: Structures, v. 45 (November 2022).
- (2022): Experimental characterization of the textile-to-mortar bond through distributed optical sensors. In: Construction and Building Materials, v. 326 (April 2022).
- (2022): Micro-mechanical FE modelling and constitutive parameters calibration of masonry panels strengthened with CFRP sheets. In: Composite Structures, v. 285 (April 2022).
- (2018): The influence of the joint thickness on the adhesion between CFRP reinforcements and masonry arches. In: Procedia Structural Integrity, v. 11 ( 2018).
- (2018): Public Housing in Florence: Seismic Assessment of Masonry Buildings. In: Procedia Structural Integrity, v. 11 ( 2018).
- (2021): Debonding mechanism of FRP strengthened flat surfaces: Analytical approach and closed form solution. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2021): Mechanical model based on a BVP for FRPs applied on flat and curved masonry pillars with anchor spikes. In: Composite Structures, v. 273 (Oktober 2021).
- (2020): Development of an interface numerical model for C-FRPs applied on flat and curved masonry pillars. In: Composite Structures, v. 241 (Juni 2020).
- (2018): Micro-mechanical FE numerical model for masonry curved pillars reinforced with FRP strips subjected to single lap shear tests. In: Composite Structures, v. 201 (Oktober 2018).
- (2018): Coupled interface-based modelling approach for the numerical analysis of curved masonry specimens strengthened by CFRP. In: Composite Structures, v. 200 (September 2018).
- (2018): Single lap shear tests of masonry curved pillars externally strengthened by CFRP strips. In: Composite Structures, v. 200 (September 2018).
- (2020): Experimental and numerical analyses of strengthened rammed earth masonry arches. In: Computers & Structures, v. 239 (Oktober 2020).
- (2020): Heterogeneous FE model for single lap shear tests on FRP reinforced masonry curved pillars with spike anchors. In: Construction and Building Materials, v. 258 (Oktober 2020).
- (2020): Modeling of the Tensile Behavior FRCM Systems for Repair and Strengthening Interventions of Masonry Structures. In: Frontiers in Built Environment, v. 6 (Januar 2020).
- (2020): The seismic analysis of Cerere at the Museum of Bargello. In: Bulletin of Earthquake Engineering, v. 18, n. 6 (Februar 2020).
- (2019): Advanced non-linear numerical modeling of masonry groin vaults of major historical importance: St John Hospital case study in Jerusalem. In: Engineering Structures, v. 194 (September 2019).
- (2013): Lower Bound Limit Analysis of Masonry Arches with CFRP Reinforcements: A Numerical Method. In: Journal of Composites for Construction, v. 17, n. 4 (August 2013).
- (2015): Experimental Study of Bond Behavior of CFRP-to-Brick Joints. In: Journal of Composites for Construction, v. 19, n. 3 (Juni 2015).
- (2013): Shear strength of brick masonry walls assembled with different types of mortar. In: Construction and Building Materials, v. 40 (März 2013).
- (2016): The Groin Vaults of St. John Hospital in Jerusalem: An Experimental Analysis on a Scale Model. In: International Journal of Architectural Heritage, v. 10, n. 7 (März 2016).
Structurae kooperiert mit
