Antonino Recupero 
- (2023): Experimental application of the Italian guidelines for the risk classification and management and for the safety evaluation of existing bridges. In: Structures, v. 58 (Dezember 2023).
- (2023): Assessment and strengthening of reinforced concrete bridges with half‐joint deterioration. In: Structural Concrete, v. 24, n. 1 (Februar 2023).
- (2022): Resistencia a flexion de vigas postensadas de hormigón con corrosión. Ensayos a gran escala y simulación numérica.. In: Hormigón y acero, v. 73, n. 297 ( 2022).
- (2022): Quality control and safety assessment of prestressed concrete bridge decks through combined field tests and numerical simulation. In: Structures, v. 39 (Mai 2022).
- (2021): Influence of axial force and corrosion on failure of prestressed concrete structures considering M-V interaction. In: Engineering Structures, v. 242 (September 2021).
- (2013): Concrete arch bridges built by lattice cantilevers. In: Structural Engineering and Mechanics, v. 45, n. 5 (März 2013).
- (2021): Evaluation of web reinforcements in prestressed concrete box girders through shear-transverse bending domains. In: Advances in Structural Engineering, v. 24, n. 8 (Januar 2021).
- (2020): Bond behavior and ultimate capacity of notched concrete beams with externally-bonded FRP and PBO-FRCM systems under different environmental conditions. In: Construction and Building Materials, v. 265 (Dezember 2020).
- (2019): Effects of near-fault earthquakes on existing bridge performances. In: Journal of Civil Structural Health Monitoring, v. 10, n. 1 (Dezember 2019).
- (2019): Experimental tests on corroded prestressed concrete beams subjected to transverse load. In: Structural Concrete, v. 20, n. 6 (Dezember 2019).
- (2014): Design procedure for prestressed concrete beams. In: Computers and Concrete, v. 13, n. 2 (Februar 2014).
- (2012): Generalization of shear truss model to the case of SFRC beams with stirrups. In: Computers and Concrete, v. 9, n. 3 (März 2012).
- (2017): Puentes de hormigón con sección cajón: interacción en las almas entre el esfuerzo cortante y los momentos de flexión transversal. Vorgetragen bei: VII Congreso Internacional de Estructuras, Congreso de la Asociación Científico-Técnica del Hormigón Estructural (ACHE), A Coruña, 20-22 de junio de 2017.
- (2014): Concrete columns confined with fibre reinforced cementitious mortars: Experimentation and modelling. In: Construction and Building Materials, v. 52 (Februar 2014).
- (2014): Experimental in situ behaviour of unreinforced masonry elements retrofitted by pre-tensioned stainless steel ribbons. In: Construction and Building Materials, v. 73 (Dezember 2014).
- (2014): Increasing the Capacity of Existing Bridges by Using Unbonded Prestressing Technology: A Case Study. In: Advances in Civil Engineering, v. 2014 ( 2014).
- (2013): Bending-Shear Interaction Domains for Externally Prestressed Concrete Girders. In: Advances in Civil Engineering, v. 2013 ( 2013).
- (2013): Partial Elastic Scheme Method in Cantilever Construction of Concrete Arch Bridges. In: Journal of Bridge Engineering (ASCE), v. 18, n. 7 (Juli 2013).
- (2013): Experimental test results vs. analytical prediction of welded joint strength in hybrid steel trussed concrete beams (HSTCBs). In: European Journal of Environmental and Civil Engineering, v. 17, n. 8 (September 2013).
- (2017): Interaction between Longitudinal Shear and Transverse Bending in Prestressed Concrete Box Girders. In: Journal of Bridge Engineering (ASCE), v. 22, n. 1 (Januar 2017).
- (2018): Construction sequence analysis of long-span cable-stayed bridges. In: Engineering Structures, v. 174 (November 2018).
- (2018): A Model for the Analysis of Ultimate Capacity of RC and PC Corroded Beams. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2016): Increasing the flexural capacity of RC beams using steel angles and pre-tensioned stainless steel ribbons. In: Structural Concrete, v. 17, n. 5 (Oktober 2016).
- (2017): Increasing the shear capacity of reinforced concrete beams using pretensioned stainless steel ribbons. In: Structural Concrete, v. 18, n. 3 (Juni 2017).
- (2015): The mixed approach for determination of initial cable forces in cable-stayed bridges and the parameters variability. In: The Baltic Journal of Road and Bridge Engineering, v. 10, n. 2 (Juni 2015).
- (2011): Rotating compression field model for reinforced concrete beams under prevalent shear actions. In: Structural Concrete, v. 12, n. 3 (September 2011).
- (2010): BEF Analogy for Concrete Box Girder Analysis of Bridges. Vorgetragen bei: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
- (2008): Nuove tecnologie per la valutazione del degrado e il controllo di strutture in c.a.p.. In: Strade e Autostrade, v. 12, n. 69 (Mai 2008).
- (2005): M-V Interaction Domains for Prestressed Concrete Beams. In: Journal of Structural Engineering (ASCE), v. 131, n. 9 (September 2005).
- (1998): Behavior of Nonlinearly Restrained Slender Bridge Piers. In: Journal of Bridge Engineering (ASCE), v. 3, n. 3 (August 1998).
Structurae kooperiert mit
