Pathmanathan Rajeev 
- (2024): Bond-slip behaviour of textile-reinforcement in 3D printed concrete. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2023): Load-Carrying Capacity of Laminated Veneer Lumber Joists with Notches and Holes. In: Journal of Structural Engineering (ASCE), v. 149, n. 12 (Dezember 2023).
- (2023): Shrinkage model for waste clay brick-based geopolymer concrete. In: Construction and Building Materials, v. 404 (November 2023).
- (2017): Durability of low‑calcium fly ash based geopolymer concrete culvert in a saline environment. In: Cement and Concrete Research, v. 100 (Oktober 2017).
- (2023): Impact of stabilisation on mechanical properties of recycled concrete aggregate mixed with waste tyre rubber as a pavement material. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- : A review on condition assessment technologies for power distribution network infrastructure. In: Structure and Infrastructure Engineering.
- (2023): Applications of natural and synthetic fiber reinforced polymer in infrastructure: A suitability assessment. In: Journal of Building Engineering, v. 66 (Mai 2023).
- (2023): Investigation of waste clay brick as partial replacement in geopolymer binder. In: Construction and Building Materials, v. 365 (Februar 2023).
- (2024): Earth pressure model to predict the long-term performance of integral abutment bridge. In: Structure and Infrastructure Engineering, v. 20, n. 5 (Januar 2024).
- (2022): Rheometry for Concrete 3D Printing: A Review and an Experimental Comparison. In: Buildings, v. 12, n. 8 (31 Juli 2022).
- (2022): Development of an Innovative Boltless Connection for Multistory Modular Buildings. In: Journal of Structural Engineering (ASCE), v. 148, n. 7 (Juli 2022).
- (2021): Investigation of waste clay brick as partial replacement of geopolymer binders for rigid pavement application. In: Construction and Building Materials, v. 305 (Oktober 2021).
- (2021): Distributed optical fibre sensor for condition monitoring of mining conveyor using wavelet transform and artificial neural network. In: Structural Control and Health Monitoring, v. 28, n. 11 (September 2021).
- (2021): Residual stress-strain relationship for the biochar-based mortar after exposure to elevated temperature. In: Case Studies in Construction Materials, v. 14 (Juni 2021).
- (2021): The effect of chloride ingress in reinforced geopolymer concrete exposed in the marine environment. In: Journal of Building Engineering, v. 39 (Juli 2021).
- (2021): Evaluation of alkalinity changes and carbonation of geopolymer concrete exposed to wetting and drying. In: Journal of Building Engineering, v. 35 (März 2021).
- (2017): Effect of brown coal fly ash on dispersive clayey soils. In: Proceedings of the Institution of Civil Engineers - Ground Improvement, v. 170, n. 4 (November 2017).
- (2020): Seismic Fragility Assessment of Non-ductile Reinforced Concrete Buildings in Australia. In: Journal of Earthquake Engineering, v. 26, n. 4 (August 2020).
- (2020): Review of performance requirements for inter-module connections in multi-story modular buildings. In: Journal of Building Engineering, v. 28 (März 2020).
- (2022): Stress-Strain Relationship of Cement Paste under Triaxial Compression. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 175, n. 5 (Oktober 2022).
- (2008): Increased Accuracy of Vector-IM-Based Seismic Risk Assessment?. In: Journal of Earthquake Engineering, v. 12, n. 1 ( 2008).
- (2019): Application of stress wave propagation technique for condition assessment of timber poles. In: Structure and Infrastructure Engineering, v. 15, n. 9 (Mai 2019).
- (2019): Stress-strain relationship of cement mortar under triaxial compression. In: Construction and Building Materials, v. 220 (September 2019).
- (2019): Effect of hysteretic steel damper uncertainty on seismic performance of steel buildings. In: Journal of Constructional Steel Research, v. 157 (Juni 2019).
- (2018): Mitigation of heat stress risks through building energy efficiency upgrade: a case study of Melbourne, Australia. In: Australian Journal of Civil Engineering, v. 16, n. 1 ( 2018).
- (2010): Confidence Factor?. In: Journal of Earthquake Engineering, v. 14, n. 7 ( 2010).
- (2017): Alkali activated materials vs geopolymers: Role of boron as an eco-friendly replacement. In: Construction and Building Materials, v. 146 (August 2017).
- (2015): Modelling of upheaval buckling of offshore pipeline buried in clay soil using genetic programming. In: Engineering Structures, v. 101 (Oktober 2015).
- (2018): Numerical study on the effects of diaphragm stiffness and strength on the seismic response of multi-story modular buildings. In: Engineering Structures, v. 163 (Mai 2018).
- (2018): Durability Performance of Precast Fly Ash–Based Geopolymer Concrete under Atmospheric Exposure Conditions. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 3 (März 2018).
Structurae kooperiert mit
