0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Muhammad K. Rahman ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Rahman, Muhammad K. / Kailani, Hashem Y. / Bahraq, Ashraf A. / Al-Dulaijan, Salah U. / Ahmed, Shamsad (2025): Development of Water-Cured Alkali-Activated Concrete with a High Volume of Silica-Rich Waste Limestone Powder and GGBS and Fly Ash Materials: Strength, Durability, and Life Cycle Assessment. In: Journal of Materials in Civil Engineering (ASCE), v. 37, n. 1 (Januar 2025).

    https://doi.org/10.1061/jmcee7.mteng-17475

  2. Mostafa, Omar M. / Rahman, Muhammad K. / Al-Zahrani, Mesfer M. / Adekunle, Saheed K. / Al-Osta, Mohammed A. / Najamuddin, Syed K. (2023): Flexural behavior and bond coefficient of BFRP bar reinforced normal and high strength concrete beams. In: Construction and Building Materials, v. 401 (Oktober 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.132896

  3. Sadoon, Ahmed A. / Al-Shugaa, Madyan A. / Rahman, Muhammad K. / Al-Fakih, Amin / Al-Osta, Mohammed A. (2023): Enhancing unreinforced masonry wall resilience through nano-silica modified steel fiber reinforced mortar: A study on in-plane cyclic loading. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).

    https://doi.org/10.1016/j.cscm.2023.e02358

  4. Saeed, Muneer K. / Rahman, Muhammad K. / Alfawzan, Mohammed / Basha, Shameer / Dahish, Hany A. (2023): Recycling of date kernel powder (DKP) in mass concrete for mitigating heat generation and risk of cracking at an early age. In: Construction and Building Materials, v. 376 (Mai 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.131033

  5. Cadenazzi, Thomas / Keles, Busra / Rahman, Muhammad K. / Nanni, Antonio (2022): Life-Cycle Cost and Life-Cycle Assessment of a Monumental Fiber-Reinforced Polymer Reinforced Concrete Structure. In: Journal of Construction Engineering and Management, v. 148, n. 9 (September 2022).

    https://doi.org/10.1061/(asce)co.1943-7862.0002339

  6. Saeed, Muneer K. / Rahman, Muhammad K. / Alfawzan, Mohammed / Basha, Shameer / Dahish, Hany A. (2022): Evaluation of date kernel powder (DKP) for potential use as setting and hydration retarder in concrete. In: Journal of Building Engineering, v. 57 (Oktober 2022).

    https://doi.org/10.1016/j.jobe.2022.104855

  7. Saeed, Muneer K. / Rahman, Muhammad K. / Baluch, Mohammed H. / Tooti, Lutf A. (2020): Cracking in Concrete Water Tank due to Restrained Shrinkage and Heat of Hydration: Field Investigations and 3D Finite Element Simulation. In: Journal of Performance of Constructed Facilities (ASCE), v. 34, n. 1 (Februar 2020).

    https://doi.org/10.1061/(asce)cf.1943-5509.0001356

  8. Al-Shugaa, Madyan A. / Rahman, Muhammad K. / Baluch, Mohammed H. / Al-Gadhib, Ali H. / Sadoon, Ahmed A. / Al-Osta, Mohammed A. (2019): Performance of hollow concrete block masonry walls retrofitted with steel-fiber and microsilica admixed plaster. In: Structural Concrete, v. 20, n. 1 (Februar 2019).

    https://doi.org/10.1002/suco.201700261

  9. Saeed, Muneer K. / Rahman, Muhammad K. / Baluch, Mohammed H. (2019): Influence of steel and polypropylene fibers on cracking due to heat of hydration in mass concrete structures. In: Structural Concrete, v. 20, n. 2 (April 2019).

    https://doi.org/10.1002/suco.201800144

  10. Arowojolu, Olaniyi / Ibrahim, Ahmed / Rahman, Muhammad K. / Al-Osta, Mohammed / Al-Gadhib, Ali H. (2019): Plastic hinge relocation in reinforced concrete beam–column joint using carbon fiber–reinforced polymer. In: Advances in Structural Engineering, v. 22, n. 14 (Juni 2019).

    https://doi.org/10.1177/1369433219855901

  11. Griffin, Andrew / Kim, Jung J. / Rahman, Muhammad K. / Reda Taha, Mahmoud M. (2015): Microstructure of a Type G Oil Well Cement-Nanosilica Blend. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 5 (Mai 2015).

    https://doi.org/10.1061/(asce)mt.1943-5533.0001124

  12. Al-Kutti, Walid A. / Rahman, Muhammad K. / Shazali, Mohammed A. / Baluch, Mohammed H. (2014): Enhancement in Chloride Diffusivity due to Flexural Damage in Reinforced Concrete Beams. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 4 (April 2014).

    https://doi.org/10.1061/(asce)mt.1943-5533.0000836

  13. Saeed, Muneer K. / Rahman, Muhammad K. / Baluch, Mohammed H. (2016): Early age thermal cracking of mass concrete blocks with Portland cement and ground granulated blast-furnace slag. In: Magazine of Concrete Research, v. 68, n. 13 (Juli 2016).

    https://doi.org/10.1680/jmacr.15.00044

  14. AbouHamdah, Islam S. / Al-Osta, Mohammed A. / Baluch, Mohammed H. / Rahman, Muhammad K. / Ibrahim, Ahmed (2018): Structural behavior of cast-in C-channel anchors in precast concrete under uniaxial tension. In: Structural Concrete, v. 19, n. 4 (August 2018).

    https://doi.org/10.1002/suco.201700163

  15. Bahij, Sifatullah / Adekunle, Saheed K. / Al-Osta, Mohammed / Ahmad, Shamsad / Al-Dulaijan, Salah U. / Rahman, Muhammad K. (2018): Numerical investigation of the shear behavior of reinforced ultra-high-performance concrete beams. In: Structural Concrete, v. 19, n. 1 (Februar 2018).

    https://doi.org/10.1002/suco.201700062

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine