Yinghong Qin 
- (2024): A Scientometric Examination on Performance-Driven Optimization in Urban Block Design Research: State of the Art and Future Perspectives. In: Buildings, v. 14, n. 2 (1 Februar 2024).
- (2023): Experimental investigation for dynamic characteristics of paraffin-graphite based CPCM (composite phase change material) amended expansive soil under dry-wet cycles. In: Construction and Building Materials, v. 404 (November 2023).
- (2024): Deciphering Urban Heat Island Mitigation: A Comprehensive Analysis of Application Categories and Research Trends. In: Sustainable Cities and Society, v. 101 (Februar 2024).
- (2021): Biochar from waste biomass as hygroscopic filler for pervious concrete to improve evaporative cooling performance. In: Construction and Building Materials, v. 287 (Juni 2021).
- (2022): Evaluation of the properties and carbon sequestration potential of biochar-modified pervious concrete. In: Construction and Building Materials, v. 314 (Januar 2022).
- (2021): Rutting Prevention of Bituminous Mastic Using Microencapsulation Phase Change Material. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 12 (Dezember 2021).
- (2020): Properties of cement mortar containing pulverized biochar pyrolyzed at different temperatures. In: Construction and Building Materials, v. 263 (Dezember 2020).
- (2014): Understanding pavement-surface energy balance and its implications on cool pavement development. In: Energy and Buildings, v. 85 (Dezember 2014).
- (2015): Urban canyon albedo and its implication on the use of reflective cool pavements. In: Energy and Buildings, v. 96 (Juni 2015).
- (2016): Theory and procedure for measuring the solar reflectance of urban prototypes. In: Energy and Buildings, v. 126 (August 2016).
- (2017): Regulating top albedo and bottom emissivity of concrete roof tiles for reducing building heat gains. In: Energy and Buildings, v. 156 (Dezember 2017).
- (2020): The damage mechanism and failure prediction of concrete under wetting–drying cycles with sodium sulfate solution. In: Construction and Building Materials, v. 264 (Dezember 2020).
- (2021): Microstructure and transport properties of cement-based material enhanced by graphene oxide. In: Magazine of Concrete Research, v. 73, n. 19 (Oktober 2021).
- (2019): Linearity between Pavement Thermophysical Properties and Surface Temperatures. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 11 (November 2019).
- (2019): A Preliminary Study on the Long-Term Structural Stability of Ventilation Ducts in Cold Regions. In: Civil Engineering Journal, v. 5, n. 6 (Juni 2019).
- (2013): Modeling Cold Region Ground Temperatures with a Heat Flux Upper Boundary Model. In: Journal of Cold Regions Engineering, v. 27, n. 1 (März 2013).
- (2019): Moist curing increases the solar reflectance of concrete. In: Construction and Building Materials, v. 215 (August 2019).
- (2011): Modeling temperature distribution in rigid pavement slabs: Impact of air temperature. In: Construction and Building Materials, v. 25, n. 9 (September 2011).
- (2015): Carbonation dominates the acid intake of recycled concrete aggregate subjected to intermittent leaching. In: Construction and Building Materials, v. 89 (August 2015).
- (2016): Shear behavior of recycled aggregate concrete after exposure to high temperatures. In: Construction and Building Materials, v. 106 (März 2016).
- (2016): Water availability near the surface dominates the evaporation of pervious concrete. In: Construction and Building Materials, v. 111 (Mai 2016).
- (2016): Evaluation of bond performance between deformed bars and recycled aggregate concrete after high temperatures exposure. In: Construction and Building Materials, v. 112 (Juni 2016).
- (2011): Modeling the temperature and stress distributions in rigid pavements: Impact of Solar Radiation absorption and heat history development. In: KSCE Journal of Civil Engineering, v. 15, n. 8 (November 2011).
- (2014): Simulating moisture distribution within concrete pavement slabs: model development and sensitivity study. In: Materials and Structures, v. 47, n. 1-2 (Januar 2014).
- (2018): Effect of limestone powder in manufactured sand on the hydration products and microstructure of recycled aggregate concrete. In: Construction and Building Materials, v. 188 (November 2018).
Structurae kooperiert mit
