Hui Qian 
- (2024): Hysteretic Behavior of Self-Centering Shear Wall Incorporating Superelastic Shape Memory Alloy Bars and Engineered Cementitious Composites Subjected to Cyclic Loading. In: Journal of Structural Engineering (ASCE), v. 150, n. 9 (September 2024).
- (2024): Cyclic tensile response and crack closure performance of novel superelastic Ni-Ti SMA cable grid-reinforced engineered cementitious composites. In: Construction and Building Materials, v. 445 (September 2024).
- (2024): Low-cycle fatigue behaviour of ribbed 1.4362 duplex stainless steel reinforcement. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2023): Development and investigation of a novel precast beam-column friction hinge joint enhanced with Cu–Al–Mn SMA-plate-based self-centring buckling-restrained devices. In: Journal of Building Engineering, v. 79 (November 2023).
- (2023): Development and preliminarily tests of superelastic Ni-Ti SMA ribbed bars for reinforced concrete applications. In: Construction and Building Materials, v. 402 (Oktober 2023).
- (2024): Energy transition roadmap towards net-zero communities: A case study in Japan. In: Sustainable Cities and Society, v. 100 (Januar 2024).
- (2024): Experimental investigation of compressive behaviors of functionally graded composites material based on engineering cementitious composites and normal concrete. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2021): The High-Speed Railway Bridges Under Vehicle Moving Load And Near Fault Seismic Ground Motions – Review.. In: Journal of Building Materials and Structures, v. 8, n. 2 (Dezember 2021).
- (2023): A Fourier Series-Based Multi-Point Excitation Model for Crowd Jumping Loads. In: Buildings, v. 13, n. 7 (28 Juni 2023).
- (2023): Data driven prediction of fatigue residual stiffness of braided ceramic matrix composites based on Latent-ODE. In: Composite Structures, v. 323 (November 2023).
- (2023): Long Short-Term Memory Network for Predicting Wind-Induced Vibration Response of Lightning Rod Structures. In: Buildings, v. 13, n. 5 (27 April 2023).
- (2023): Bond slip detection of shear interfaces for GFRP and UHPC composite members using piezoceramic smart aggregates. In: Smart Materials and Structures, v. 32, n. 6 (21 April 2023).
- (2023): Feasibility study of self-centring beam-to-column joints with posttensioned SMA strands. In: Structures, v. 52 (Juni 2023).
- (2023): Development of a novel rapid repairing agent for concrete based on GFRP waste powder/GGBS geopolymer mortars. In: Journal of Building Engineering, v. 71 (Juli 2023).
- (2023): Experimental study on re-centering behavior and energy dissipation capacity of prefabricated concrete frame joints with shape memory alloy bars and engineered cementitious composites. In: Engineering Structures, v. 277 (Februar 2023).
- (2023): Influence Factors on the Load-Carrying Capacity of Bolted Timber Connections with Slotted-In Steel Plates. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 5 (Mai 2023).
- (2023): Chloride Ion Corrosion Resistance of Innovative Self-Healing SMA Fiber-Reinforced Engineering Cementitious Composites under Dry-Wet Cycles for Ocean Structures. In: Buildings, v. 13, n. 2 (14 Februar 2023).
- (2023): Experimental investigation of the seismic performance of precast post-tensioned segmental bridge piers with stainless energy-dissipating bars. In: Engineering Structures, v. 283 (Mai 2023).
- (2023): Development and investigation of an innovative shape memory alloy cable‐controlled self‐centering viscoelastic coupling beam damper for seismic mitigation in coupled shear wall structures. In: Earthquake Engineering and Structural Dynamics, v. 52, n. 2 (März 2023).
- (2022): Experimental Study on Flexural Behavior of Seawater Sea-Sand Concrete Beams Reinforced with Superelastic Shape Memory Alloy Bars. In: Buildings, v. 12, n. 12 (1 Dezember 2022).
- (2022): Interface damage monitoring of assembled GFRP-UHPC composite beams using piezoelectric smart aggregate. In: Smart Materials and Structures, v. 31, n. 12 (10 November 2022).
- (2022): Experimental study on the seismic performance of self-centering bridge piers incorporating ECC and superelastic SMA bars in the plastic hinge regions. In: Structures, v. 46 (Dezember 2022).
- (2022): Comparative vulnerability analysis of decomposed signal for the LRB base-isolated structure under pulse-like ground motions. In: Journal of Building Engineering, v. 59 (November 2022).
- (2022): Effects of natural minor corrosion levels on mechanical property and bond anchorage behavior of CRB600H steel bars. In: Construction and Building Materials, v. 340 (Juli 2022).
- (2021): Evaluation of self-healing performance of a smart composite material (SMA-ECC). In: Construction and Building Materials, v. 290 (Juli 2021).
- (2022): Equivalent Dynamic Load Factor of Different Non-Exceedance Probability for Crowd Jumping Loads. In: Buildings, v. 12, n. 4 (11 April 2022).
- (2021): Cyclic behavior of superelastic SMA cable and its application in an innovative self-centering BRB. In: Smart Materials and Structures, v. 30, n. 9 (30 Juli 2021).
- (2021): Generative Adversarial Networks-Based Stochastic Approach to the Modeling of Individual Jumping Loads. In: International Journal of Structural Stability and Dynamics, v. 21, n. 4 (Februar 2021).
- (2016): Experimental investigations of building structure with a superelastic shape memory alloy friction damper subject to seismic loads. In: Smart Materials and Structures, v. 25, n. 12 (Dezember 2016).
- (2007): Fatigue Evaluation of a Railway Steel Bridge Based on In-site Test Data. Vorgetragen bei: IABSE Symposium: Improving Infrastructure Worldwide, Weimar, Germany, 19-21 September 2007.
Structurae kooperiert mit
