ShaoYun Pu 
- (2024): Dynamic Properties of Undisturbed Guiyang Red Clay in the Small-Strain Range. In: International Journal of Geomechanics, v. 24, n. 7 (Juli 2024).
- (2024): A Sustainable Reinforcement Method for Recycled Road Subgrade Demolition Waste as Road Bases Using Waterborne Polyurethane and Fiber. In: International Journal of Geomechanics, v. 24, n. 8 (August 2024).
- (2024): Comparative study on the preparation of phosphate-based geopolymers using different activators. In: Construction and Building Materials, v. 437 (Juli 2024).
- (2024): Reinforcement of soft clay using industrial residue-based soil stabilizer and recycled fine aggregate: A comprehensive investigation. In: Construction and Building Materials, v. 436 (Juli 2024).
- (2024): Synergistic preparation of geopolymer using electrolytic manganese residue, coal slag and granulated blast furnace slag. In: Journal of Building Engineering, v. 91 (August 2024).
- (2023): A green phosphate-based geopolymer adsorbent or binder with high specific surface area for environmental applications. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2024): Mechanical properties and environmental characteristics of the synergistic preparation of cementitious materials using electrolytic manganese residue, steel slag, and blast furnace slag. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2024): Effect and Mechanism of Freeze–Thaw Cycles on Static and Dynamic Characteristics of Expandable Polystyrene Lightweight Soil. In: International Journal of Geomechanics, v. 24, n. 2 (Februar 2024).
- (2023): Interfacial strength characteristics between modified iron tailings and profiled fibers under dry–wet and freeze–thaw environments. In: Construction and Building Materials, v. 403 (November 2023).
- (2022): Water resistance of fly ash phosphoric acid-based geopolymer. In: Developments in the Built Environment, v. 12 (Dezember 2022).
- (2023): Mechanical Properties and Microscopic Mechanism of Cement-Stabilized Calcareous Sand Improved with a Nano-MgO Additive. In: International Journal of Geomechanics, v. 23, n. 2 (Februar 2023).
- (2023): Characterizing the in-situ state of sandy soils for liquefaction analysis using resistivity piezocone penetration test. In: Soil Dynamics and Earthquake Engineering, v. 164 (Januar 2023).
- (2022): Strength properties and microscopic mechanism of lime and fly ash modified expandable poly styrene lightweight soil reinforced by polypropylene fiber. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2022): A eco-friendly acid fly ash geopolymer with a higher strength. In: Construction and Building Materials, v. 335 (Juni 2022).
- (2021): Effect of synthesis parameters on the development of unconfined compressive strength of recycled waste concrete powder-based geopolymers. In: Construction and Building Materials, v. 292 (Juli 2021).
- (2022): Preparation and engineering properties of alkali-activated filling grouts for shield tunnel. In: Construction and Building Materials, v. 314 (Januar 2022).
- (2021): Utilization of OPC and FA to enhance reclaimed lime-fly ash macadam based geopolymers cured at ambient temperature. In: Construction and Building Materials, v. 303 (Oktober 2021).
- (2021): Mechanical and microscopic properties of fly ash phosphoric acid-based geopolymer paste: A comprehensive study. In: Construction and Building Materials, v. 299 (September 2021).
- (2020): Efficient use of steel slag in alkali-activated fly ash-steel slag-ground granulated blast furnace slag ternary blends. In: Construction and Building Materials, v. 259 (Oktober 2020).
- (2020): Strength Characteristics of Nonpenetrating Joint Rock Mass under Different Shear Conditions. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2020): Mechanical and Microscopic Properties of Cement Stabilized Silt. In: KSCE Journal of Civil Engineering, v. 24, n. 8 (Juli 2020).
- (2020): Visco-Elastoplastic Constitutive Fatigue Model for Rocks. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2020): A method for calculating the ultimate bearing capacity of uplift piles in combined soil and rock mass. In: European Journal of Environmental and Civil Engineering, v. 26, n. 6 (Juni 2020).
- (2020): Multi-technical characterization and correlations between properties of standard cured alkali-activated high-calcium FA binders with GGBS as additive. In: Construction and Building Materials, v. 241 (April 2020).
- (2019): Effect of steel slag on fresh, hardened and microstructural properties of high-calcium fly ash based geopolymers at standard curing condition. In: Construction and Building Materials, v. 229 (Dezember 2019).
- (2019): Mechanical characteristics and water stability of silt solidified by incorporating lime, lime and cement mixture, and SEU-2 binder. In: Construction and Building Materials, v. 214 (Juli 2019).
Structurae kooperiert mit
