0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

M. J. Nigel Priestley

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Verma, Ravindra / Priestley, M. J. Nigel (1994): Optimal Trends in Seismic Design of Single Column Circular Reinforced Concrete Bridge Piers. In: Earthquake Spectra, v. 10, n. 3 (August 1994).

    https://doi.org/10.1193/1.1585790

  2. Seible, Frieder / Priestley, M. J. Nigel (1991): Performance assessment of cap-column joints under seismic loading. Vorgetragen bei: IABSE Colloquium: Structural Concrete, Stuttgart, Germany, 1991.

    https://doi.org/10.5169/seals-47650

  3. Hart, Gary C. / Priestley, M. J. Nigel / Seible, Frieder (1992): Masonry wall frame design and performance. In: The Structural Design of Tall Buildings, v. 1, n. 2 (Dezember 1992).

    https://doi.org/10.1002/tal.4320010204

  4. ChaiI, Yuk Hon / Priestley, M. J. Nigel / Seible, Freider (1991): Seismic Retrofit of Circular Bridge Columns for Enhanced Flexural Performance. In: ACI Structural Journal, v. 88, n. 5 (September 1991).

    https://doi.org/10.14359/2759

  5. Priestley, M. J. Nigel / Calvi, G. Michele (1991): Towards a Capacity-Design Assessment Procedure for Reinforced Concrete Frames. In: Earthquake Spectra, v. 7, n. 3 (August 1991).

    https://doi.org/10.1193/1.1585635

  6. Seible, Frieder / Priestley, M. J. Nigel (1992): Earthquake hazard mitigation in new and existing structures. Vorgetragen bei: 14th IABSE Congress, New Delhi, India, 6-10 March 1992.

    https://doi.org/10.5169/seals-13788

  7. Seible, Frieder / Priestley, M. J. Nigel (1992): Earthquake hazard mitigation in new and existing structures. Vorgetragen bei: 14th IABSE Congress, New Delhi, India, 6-10 March 1992.

    https://doi.org/10.5169/seals-13907

  8. Pettinga, J. Didier / Priestley, M. J. Nigel / Pampanin, Stefano / Christopoulos, Constantin (2007): The Role of Inelastic Torsion in the Determination of Residual Deformations. In: Journal of Earthquake Engineering, v. 11, n. 1 ( 2007).

    https://doi.org/10.1080/13632460701280088

  9. Petrini, Lorenza / Maggi, Claudio / Priestley, M. J. Nigel / Calvi, G. Michele (2008): Experimental Verification of Viscous Damping Modeling for Inelastic Time History Analyzes. In: Journal of Earthquake Engineering, v. 12, n. 1 ( 2008).

    https://doi.org/10.1080/13632460801925822

  10. Ingham, Jason M. / Priestley, M. J. Nigel / Seible, Frieder (1998): Cyclic Response of Bridge Knee Joints with Circular Columns. In: Journal of Earthquake Engineering, v. 2, n. 3 ( 1998).

    https://doi.org/10.1080/13632469809350327

  11. Christopoulos, Constantin / Pampanin, Stefano / Priestley, M. J. Nigel (2003): Performance-Based Seismic Response of Frame Structures Including Residual Deformations. Part I: Single-Degree of Freedom Systems. In: Journal of Earthquake Engineering, v. 7, n. 1 ( 2003).

    https://doi.org/10.1080/13632460309350443

  12. Pampanin, Stefano / Christopoulos, Constantin / Priestley, M. J. Nigel (2003): Performance-Based Seismic Response of Frame Structures Including Residual Deformations. Part II: Multi-Degree of Freedom Systems. In: Journal of Earthquake Engineering, v. 7, n. 1 ( 2003).

    https://doi.org/10.1080/13632460309350444

  13. Pampanin, Stefano / Priestley, M. J. Nigel / Sritharan, S. (2001): Analytical Modelling of the Seismic Behaviour of Precast Concrete Frames Designed with Ductile Connections. In: Journal of Earthquake Engineering, v. 5, n. 3 ( 2001).

    https://doi.org/10.1080/13632460109350397

  14. Seible, Frieder / Priestley, M. J. Nigel / Hegemier, Gilbert A. / Innamorato, Donato (1997): Seismic Retrofit of RC Columns with Continuous Carbon Fiber Jackets. In: Journal of Composites for Construction, v. 1, n. 2 (Mai 1997).

    https://doi.org/10.1061/(asce)1090-0268(1997)1:2(52)

  15. Kowalsky, Mervyn J. / Priestley, M. J. Nigel / MacRae, Gregory A. (1995): Displacement-based design of RC bridge columns in seismic regions. In: Earthquake Engineering and Structural Dynamics, v. 24, n. 12 (Dezember 1995).

    https://doi.org/10.1002/eqe.4290241206

  16. Zonta, Daniele / Elgamal, Ahmed / Fraser, Michael / Priestley, M. J. Nigel (2008): Analysis of change in dynamic properties of a frame-resistant test building. In: Engineering Structures, v. 30, n. 1 (Januar 2008).

    https://doi.org/10.1016/j.engstruct.2007.02.022

  17. Ricles, James M. / Yang, Yueh-Shiun / Priestley, M. J. Nigel (1998): Modeling Nonductile R/C Columns for Seismic Analysis of Bridges. In: Journal of Structural Engineering (ASCE), v. 124, n. 4 (April 1998).

    https://doi.org/10.1061/(asce)0733-9445(1998)124:4(415)

  18. Priestley, M. J. Nigel (2002): Direct Displacement-Based Design of Precast/Prestressed Concrete Buildings. In: PCI Journal, v. 47, n. 6 (November 2002).

    https://doi.org/10.15554/pcij.11012002.66.79

  19. Silva, Pedro F. / Seible, Frieder / Priestley, M. J. Nigel (2001): Influence of Strand Development Length in Formation of Plastic Hinges in Prestressed Piles. In: PCI Journal, v. 46, n. 3 (Mai 2001).

    https://doi.org/10.15554/pcij.05012001.76.89

  20. Holombo, Jay / Priestley, M. J. Nigel / Seible, Frieder (2000): Continuity of Precast Prestressed Sliced-Girder Bridges Under Seismic Loads. In: PCI Journal, v. 45, n. 2 (März 2000).

    https://doi.org/10.15554/pcij.03012000.40.63

  21. Priestley, M. J. Nigel / Sritharan, S. (Sri) / Conley, James R. / Stefano Pampanin, Stefano (1999): Preliminary Results and Conclusions From the PRESSS Five-Story Precast Concrete Test Building. In: PCI Journal, v. 44, n. 6 (November 1999).

    https://doi.org/10.15554/pcij.11011999.42.67

  22. Sritharan, S. (Sri) / Priestley, M. J. Nigel / Seible, Frieder (1999): Enhancing Seismic Performance of Bridge Cap Beam-to-Column Joints Using Prestressing. In: PCI Journal, v. 44, n. 4 (Juli 1999).

    https://doi.org/10.15554/pcij.07011999.74.91

  23. Priestley, M. J. Nigel (1996): The PRESSS Program Current Status and Proposed Plans for Phase III. In: PCI Journal, v. 41, n. 2 (März 1996).

    https://doi.org/10.15554/pcij.03011996.22.40

  24. Priestley, M. J. Nigel / MacRae, Gregory A. (1996): Seismic Tests of Precast Beam-to-Column Joint Subassemblages With Unbonded Tendons. In: PCI Journal, v. 41, n. 1 (Januar 1996).

    https://doi.org/10.15554/pcij.01011996.64.81

  25. Priestley, M. J. Nigel / Tao, Jian Ren (1993): Seismic Response of Precast Prestressed Concrete Frames With Partially Debonded Tendons. In: PCI Journal, v. 38, n. 1 (Januar 1993).

    https://doi.org/10.15554/pcij.01011993.58.69

  26. Priestley, M. J. Nigel (1991): Overview of PRESSS Research Program. In: PCI Journal, v. 36, n. 4 (Juli 1991).

    https://doi.org/10.15554/pcij.07011991.50.57

  27. Priestley, M. J. Nigel / Verma, Ravindra / Xiao, Yan (1994): Seismic Shear Strength of Reinforced Concrete Columns. In: Journal of Structural Engineering (ASCE), v. 120, n. 8 (August 1994).

    https://doi.org/10.1061/(asce)0733-9445(1994)120:8(2310)

  28. Smyrou, Eleni / Priestley, M. J. Nigel / Carr, Athol J. (2011): Modelling of elastic damping in nonlinear time-history analyses of cantilever RC walls. In: Bulletin of Earthquake Engineering, v. 9, n. 5 (April 2011).

    https://doi.org/10.1007/s10518-011-9286-y

  29. Priestley, M. J. Nigel (2013): Towards Displacement-Based Design in Seismic Design Codes. In: Structural Engineering International, v. 23, n. 2 (Mai 2013).

    https://doi.org/10.1080/10168664.2013.11985330

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine