-
Fang, Congqi / Gylltoft, Kent / Lundgren, Karin / Plos, Mario (2006): Effect of corrosion on bond in reinforced concrete under cyclic loading. In: Cement and Concrete Research, v. 36, n. 3 (März 2006).
https://doi.org/10.1016/j.cemconres.2005.11.019
-
Fang, Congqi / Lundgren, Karin / Plos, Mario / Gylltoft, Kent (2006): Bond behaviour of corroded reinforcing steel bars in concrete. In: Cement and Concrete Research, v. 36, n. 10 (Oktober 2006).
https://doi.org/10.1016/j.cemconres.2006.05.008
-
Gottsäter, Erik / Larsson Ivanov, Oskar / Plos, Mario (2019): Crack widths in portal frame bridges subjected to restraint effects. Vorgetragen bei: IABSE Congress: The Evolving Metropolis, New York, NY, USA, 4-6 September 2019.
https://doi.org/10.2749/newyork.2019.1100
-
Gottsäter, Erik / Larsson Ivanov, Oskar / Molnár, Miklós / Plos, Mario (2018): Measurements and simulation of temperature in a portal frame bridge. Vorgetragen bei: IABSE Symposium: Tomorrow’s Megastructures, Nantes, France, 19-21 September 2018.
https://doi.org/10.2749/nantes.2018.s24-9
-
Schlune, Hendrik / Plos, Mario / Gylltoft, Kent (2011): Safety formats for nonlinear analysis tested on concrete beams subjected to shear forces and bending moments. In: Engineering Structures, v. 33, n. 8 (August 2011).
https://doi.org/10.1016/j.engstruct.2011.04.008
-
Shu, Jiangpeng / Honfi, Dániel / Plos, Mario / Zandi, Kamyab / Magnusson, Jonas (2019): Assessment of a cantilever bridge deck slab using multi-level assessment strategy and decision support framework. In: Engineering Structures, v. 200 (Dezember 2019).
https://doi.org/10.1016/j.engstruct.2019.109666
-
Plos, Mario / Gylltoft, Kent / Cederwall, Krister (1991): Full-scale shear tests on two bridges. Vorgetragen bei: IABSE Colloquium: Structural Concrete, Stuttgart, Germany, 1991.
https://doi.org/10.5169/seals-47696
-
Bagge, Niklas / Plos, Mario / Popescu, Cosmin (2019): A multi-level strategy for successively improved structural analysis of existing concrete bridges: examination using a prestressed concrete bridge tested to failure. In: Structure and Infrastructure Engineering, v. 15, n. 1 (November 2019).
https://doi.org/10.1080/15732479.2018.1476562
-
Ekström, Daniel / Rempling, Rasmus / Plos, Mario (2018): Integrated project team performance in early design stages – performance indicators influencing effectiveness in bridge design. In: Architectural Engineering and Design Management, v. 15, n. 4 (Dezember 2018).
https://doi.org/10.1080/17452007.2018.1563521
-
Shu, Jiangpeng / Plos, Mario / Zandi, Kamyab / Ashraf, Altaf (2019): Distribution of shear force: A multi-level assessment of a cantilever RC slab. In: Engineering Structures, v. 190 (Juli 2019).
https://doi.org/10.1016/j.engstruct.2019.04.045
-
Gottsäter, Erik / Johansson, Morgan / Plos, Mario / Larsson Ivanov, Oskar (2019): Crack widths in base restrained walls subjected to restraint loading. In: Engineering Structures, v. 189 (Juni 2019).
https://doi.org/10.1016/j.engstruct.2019.03.089
-
Tahershamsi, Mohammad / Hanjari, Kamyab Zandi / Lundgren, Karin / Plos, Mario (2013): Assessment of Anchorage Capacity of Naturally Corroded Reinforcement. Vorgetragen bei: IABSE Conference: Assessment, Upgrading and Refurbishment of Infrastructures, Rotterdam, The Netherlands, 6-8 May 2013.
https://doi.org/10.2749/222137813806521450
-
Honfi, Dániel / Leander, John / Björnsson, Ivar / Ivanov, Oskar L. / Plos, Mario / Zandi, Kamyab / Magnusson, Jonas / Lechner, Thomas / Gabrielsson, Henrik (2017): Decision support for maintenance and upgrading of existing bridges. Vorgetragen bei: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
https://doi.org/10.2749/vancouver.2017.0336
-
Shu, Jiangpeng / Plos, Mario / Nilenius, Filip / Zandi, Kamyab / Bagge, Niklas / Johansson, Morgan (2017): Punching/Shear Strength of a Full-scale Tested Bridge Deck Slab. Vorgetragen bei: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
https://doi.org/10.2749/vancouver.2017.1750
-
Karlsson, Mats / Rempling, Rasmus / Gylltoft, Kent / Plos, Mario (2017): Methodology for selection of production method in an early stage. Vorgetragen bei: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
https://doi.org/10.2749/vancouver.2017.1879
-
Tahershamsi, Mohammad / Zandi, Kamyab / Lundgren, Karin / Plos, Mario (2014): Anchorage of naturally corroded bars in reinforced concrete structures. In: Magazine of Concrete Research, v. 66, n. 14 (Juli 2014).
https://doi.org/10.1680/macr.13.00276
-
Schlune, Hendrik / Plos, Mario / Gylltoft, Kent (2012): Safety formats for non-linear analysis of concrete structures. In: Magazine of Concrete Research, v. 64, n. 7 (Juli 2012).
https://doi.org/10.1680/macr.11.00046
-
Plos, Mario / Shu, Jiangpeng / Zandi, Kamyab / Lundgren, Karin (2017): A multi-level structural assessment strategy for reinforced concrete bridge deck slabs. In: Structure and Infrastructure Engineering, v. 13, n. 2 (April 2017).
https://doi.org/10.1080/15732479.2016.1162177
-
Schlune, Hendrik / Plos, Mario / Gylltoft, Kent (2009): Improved bridge evaluation through finite element model updating using static and dynamic measurements. In: Engineering Structures, v. 31, n. 7 (Juli 2009).
https://doi.org/10.1016/j.engstruct.2009.02.011
-
Shu, Jiangpeng / Fall, David / Plos, Mario / Zandi, Kamyab / Lundgren, Karin (2015): Development of modelling strategies for two-way RC slabs. In: Engineering Structures, v. 101 (Oktober 2015).
https://doi.org/10.1016/j.engstruct.2015.07.003
-
Shu, Jiangpeng / Bagge, Niklas / Plos, Mario / Johansson, Morgan / Yang, Yuguang / Zandi, Kamyab (2018): Shear Capacity of a RC Bridge Deck Slab: Comparison between Multilevel Assessment and Field Test. In: Journal of Structural Engineering (ASCE), v. 144, n. 7 (Juli 2018).
https://doi.org/10.1061/(asce)st.1943-541x.0002076
-
Shu, Jiangpeng / Plos, Mario / Zandi, Kamyab / Johansson, Morgan / Nilenius, Filip (2016): Prediction of punching behaviour of RC slabs using continuum non-linear FE analysis. In: Engineering Structures, v. 125 (Oktober 2016).
https://doi.org/10.1016/j.engstruct.2016.06.044
-
Gottsäter, Erik / Larsson Ivanov, Oskar / Molnár, Miklós / Crocetti, Roberto / Nilenius, Filip / Plos, Mario (2017): Simulation of thermal load distribution in portal frame bridges. In: Engineering Structures, v. 143 (Juli 2017).
https://doi.org/10.1016/j.engstruct.2017.04.012
-
Shu, Jiangpeng / Belletti, Beatrice / Muttoni, Aurelio / Scolari, Matteo / Plos, Mario (2017): Internal force distribution in RC slabs subjected to punching shear. In: Engineering Structures, v. 153 (Dezember 2017).
https://doi.org/10.1016/j.engstruct.2017.10.005
-
Plos, Mario / Gylltoft, Kent (1998): Nonlinear FE Analyses of RC Bridge Frame Corners, Based on Fracture Mechanics. In: Journal of Bridge Engineering (ASCE), v. 3, n. 4 (November 1998).
https://doi.org/10.1061/(asce)1084-0702(1998)3:4(204)
-
Plos, Mario / Pacoste, Costin / Johansson, Morgan (2016): Recommendations for Finite Element Analysis for Design of Reinforced Concrete Bridges. Vorgetragen bei: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
https://doi.org/10.2749/stockholm.2016.2046
-
Shu, Jiangpeng / Plos, Mario / Nilenius, Filip / Zandi, Kamyab / Johansson, Morgan (2016): Prediction of punching behaviour of RC slabs using continuum nonlinear FE analysis. Vorgetragen bei: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
https://doi.org/10.2749/stockholm.2016.1624
-
Plos, Mario / Shu, Jiangpeng / Zandi, Kamyab / Lundgren, Karin (2016): A multi-level structural assessment strategy for analysis of RC bridge deck slabs. Vorgetragen bei: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
https://doi.org/10.2749/stockholm.2016.1559
-
Ekström, Daniel / Rempling, Rasmus / Simonsson, Peter / Plos, Mario (2016): Integrated project teams in early design stages – Key variables influencing cost effectiveness in bridge building. Vorgetragen bei: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
https://doi.org/10.2749/stockholm.2016.0577
-
Blomfors, Mattias / Engen, Morten / Plos, Mario (2016): Evaluation of safety formats for non-linear finite element analyses of statically indeterminate concrete structures subjected to different load paths. In: Structural Concrete, v. 17, n. 1 (Februar 2016).
https://doi.org/10.1002/suco.201500059