- Experimental programme on austenitic stainless steel RHS members subjected to monotonic and cyclic bending. In: Engineering Structures, v. 302 (März 2024). (2024):
- Experimental campaign on structural aluminium alloys under monotonic and cyclic loading. In: Engineering Structures, v. 282 (Mai 2023). (2023):
- Preliminary study of a seismic-resilient steel pilot building equipped with low-damage connections. In: Procedia Structural Integrity, v. 44 ( 2023). (2023):
- Experimental tests on SHS aluminium beams under non-uniform bending. In: Engineering Structures, v. 267 (September 2022). (2022):
- Performance-based rules for the simplified assessment of steel CBFs. In: Journal of Constructional Steel Research, v. 191 (April 2022). (2022):
- (2021): The Influence of the Material Properties on the Ultimate Behaviour of Aluminium H-shaped Beams. In: The Open Construction and Building Technology Journal, v. 15, n. 1 (18 März 2021).
- Modelling non-linear behaviur of aluminium alloy gusset joints for single layer lattices domes. In: Structures, v. 34 (Dezember 2021). (2021):
- Experimental response of a large-scale two-storey steel building equipped with low-yielding friction joints. In: Soil Dynamics and Earthquake Engineering, v. 152 (Januar 2022). (2022):
- Experimental validation of a theoretical model accounting for floor joists contribution on the flexural resistance of beam-column joints in R. C. frames. In: Engineering Structures, v. 247 (November 2021). (2021):
- The influence of the axial restraint on the overstrength of short links. In: Journal of Constructional Steel Research, v. 184 (September 2021). (2021):
- A new design approach for braced frames with extended end plate connections. Vorgetragen bei: IABSE Colloquium: Semi-Rigid Structural Connections, Istanbul, Turkey, 1996. (1996):
- Plastic design of semirigid frames for failure mode control. Vorgetragen bei: IABSE Colloquium: Semi-Rigid Structural Connections, Istanbul, Turkey, 1996. (1996):
- Pseudo-dynamic testing of a full-scale two-storey steel building with RBS connections. In: Engineering Structures, v. 212 (Juni 2020). (2020):
- Failure Mode and Drift Control of MRF-CBF Dual Systems. In: The Open Construction and Building Technology Journal, v. 4, n. 1 (November 2010). (2010):
- Failure Mode and Drift Control of MRF-CBF Dual Systems. In: The Open Construction and Building Technology Journal, v. 4, n. 1 (November 2010). (2010):
- (2014): New Advances in Seismic Design and Assessment of Steel Structures. In: The Open Construction and Building Technology Journal, v. 8, n. 1 (Dezember 2014).
- (2018): Investigation on Friction Features of Dissipative Lap Shear Connections by Means of Experimental and Numerical Tests. In: The Open Construction and Building Technology Journal, v. 12, n. 1 (Dezember 2018).
- Plastic design of eccentrically braced frames, II: Failure mode control. In: Journal of Constructional Steel Research, v. 65, n. 5 (Mai 2009). (2009):
- Plastic design of eccentrically braced frames, I: Moment–shear interaction. In: Journal of Constructional Steel Research, v. 65, n. 5 (Mai 2009). (2009):
- Plastic design of CB-frames with reduced section solution for bracing members. In: Journal of Constructional Steel Research, v. 66, n. 5 (Mai 2010). (2010):
- Moment resistance statistical distribution of beam-to-column composite joints. In: Journal of Constructional Steel Research, v. 78 (November 2012). (2012):
- Plastic Design of Seismic Resistant V-Braced Frames. In: Journal of Earthquake Engineering, v. 12, n. 8 ( 2008). (2008):
- Probabilistic Theory of Plastic Mechanism Control for Steel Moment Resisting Frames. In: Structural Safety, v. 76 (Januar 2019). (2019):
-
Plastic Design Of Seismic Resistant Steel Frames. In: Earthquake Engineering and Structural Dynamics, v. 26, n. 2 (Februar 1997).
https://doi.org/10.1002/(sici)1096-9845(199702)26:2<167::aid-eqe630>3.0.co;2-2
(1997): - Moment frames – concentrically braced frames dual systems: analysis of different design criteria. In: Structure and Infrastructure Engineering, v. 12, n. 1 (Januar 2016). (2016):
- Free from damage beam-to-column joints: Testing and design of DST connections with friction pads. In: Engineering Structures, v. 85 (Februar 2015). (2015):
- Local Buckling of Aluminum Alloy Angles under Uniform Compression. In: Journal of Structural Engineering (ASCE), v. 137, n. 2 (Februar 2011). (2011):
- P11.02: Experimental analysis and FE modeling of square hollow sections under combined axial and bending loads. In: ce/papers, v. 1, n. 2-3 (September 2017). (2017):
- Influence of connection typology on seismic response of MR-Frames with and without 'set-backs'. In: Earthquake Engineering and Structural Dynamics, v. 46, n. 1 (Januar 2017). (2017):
- Partial safety factors and overstrength coefficient evaluation for the design of connections equipped with friction dampers. In: Engineering Structures, v. 178 (Januar 2019). (2019):