Francesco Petrini 
- (2024): Multi-hazard design of low-damage high-rise steel–timber buildings subjected to wind and earthquake loading. In: Engineering Structures, v. 303 (März 2024).
- (2024): Service life extension of strategic bridges. In: Structure and Infrastructure Engineering, v. 20, n. 7-8 (Februar 2024).
- (2023): Structural robustness analysis of RC frames under seismic and blast chained loads scenarios. In: Journal of Building Engineering, v. 67 (Mai 2023).
- (2022): Component Test, Fracture Simulation and Experimental Study on Steel and Shear Panel for Seismic Resistance. In: ce/papers, v. 5, n. 4 (September 2022).
- (2021): Experimental Study on Steel Slit and Shear Panel for Seismic Resistance. In: ce/papers, v. 4, n. 2-4 (September 2021).
- (2021): Optimal design of the ideal grounded tuned mass damper inerter for comfort performances improvement in footbridges with practical implementation considerations. In: Structural Control and Health Monitoring, v. 28, n. 9 (3 August 2021).
- (2010): Basis of design and numerical modeling of offshore wind turbines. In: Structural Engineering and Mechanics, v. 36, n. 5 (November 2010).
- (2013): Numerical analyses for the structural assessment of steel buildings under explosions. In: Structural Engineering and Mechanics, v. 45, n. 6 (März 2013).
- (2018): Piezoelectric energy harvesting from vortex shedding and galloping induced vibrations inside HVAC ducts. In: Energy and Buildings, v. 158 (Januar 2018).
- (2020): Multi-Hazard Assessment of Bridges in Case of Hazard Chain: State of Play and Application to Vehicle-Pier Collision Followed by Fire. In: Frontiers in Built Environment, v. 6 (Januar 2020).
- (2020): Optimal tuned mass-damper-inerter (TMDI) design in wind-excited tall buildings for occupants’ comfort serviceability performance and energy harvesting. In: Engineering Structures, v. 204 (Februar 2020).
- (2013): Performance-based fire design of complex structures. In: International Journal of Lifecycle Performance Engineering, v. 1, n. 2 ( 2013).
- (2012): Performance-based wind design of tall buildings. In: Structure and Infrastructure Engineering, v. 8, n. 10 (Oktober 2012).
- (2011): A Preliminary Proposal for a Probabilistic Performance-Based Hurricane Engineering Framework. Vorgetragen bei: Structures Congress 2011, Las Vegas, Nevada, April 14-16, 2011.
- (2019): Optimal tuning and assessment of inertial dampers with grounded inerter for vibration control of seismically excited base-isolated systems. In: Engineering Structures, v. 196 (Oktober 2019).
- (2007): Comparison of time domain techniques for the evaluation of the response and the stability in long span suspension bridges. In: Computers & Structures, v. 85, n. 11-14 (Juni 2007).
- (2013): Performance-Based Hurricane Engineering (PBHE) framework. In: Structural Safety, v. 45 (November 2013).
- (2018): Improved risk-targeted performance-based seismic design of reinforced concrete frame structures. In: Earthquake Engineering and Structural Dynamics, v. 47, n. 1 (Januar 2018).
- (2016): Back calculation and model calibration for earthquake damaged bridges - a general procedure and its application to a highway viaduct. In: Structure and Infrastructure Engineering, v. 12, n. 8 (August 2016).
- (2011): Estimation of fatigue life for long span suspension bridge hangers under wind action and train transit. In: Structure and Infrastructure Engineering, v. 7, n. 7-8 (Juli 2011).
- (2016): Simplified fragility-based risk analysis for impulse governed blast loading scenarios. In: Engineering Structures, v. 117 (Juni 2016).
- (2017): Wind-Induced Vibration Mitigation in Tall Buildings Using the Tuned Mass-Damper-Inerter. In: Journal of Structural Engineering (ASCE), v. 143, n. 9 (September 2017).
- (2014): Fragility analysis for the Performance-Based Design of cladding wall panels subjected to blast load. In: Engineering Structures, v. 78 (November 2014).
- (2017): Nonlinear Dynamic Behavior of Cable Nets Subjected to Wind Loading. In: Structures, v. 10 (Mai 2017).
Structurae kooperiert mit
