-
Reck, H. Peter / Peköz, Teoman / Winter, George (1975): Inelastic Strength of Cold-Formed Steel Beams. In: Journal of the Structural Division (ASCE), v. 101, n. 11 (November 1975).
https://doi.org/10.1061/jsdeag.0004198
-
Simaan, Amir / Peköz, Teoman (1976): Diaphragm Braced Members and Design of Wall Studs. In: Journal of the Structural Division (ASCE), v. 102, n. 1 (Januar 1976).
https://doi.org/10.1061/jsdeag.0004278
-
Kalyanaraman, V. / Winter, George / Peköz, Teoman (1977): Unstiffened Compression Elements. In: Journal of the Structural Division (ASCE), v. 103, n. 9 (September 1977).
https://doi.org/10.1061/jsdeag.0004724
-
Kalyanaraman, Venkatakrishnan / Peköz, Teoman (1978): Analytical Study of Unstiffened Elements. In: Journal of the Structural Division (ASCE), v. 104, n. 9 (September 1978).
https://doi.org/10.1061/jsdeag.0004992
-
Desmond, Thomas P. / Winter, George / Peköz, Teoman (1981): Edge Stiffeners for Thin-Walled Members. In: Journal of the Structural Division (ASCE), v. 107, n. 2 (Februar 1981).
https://doi.org/10.1061/jsdeag.0005645
-
Desmond, Thomas P. / Winter, George / Peköz, Teoman (1981): Intermediate Stiffeners for Thin-Walled Members. In: Journal of the Structural Division (ASCE), v. 107, n. 4 (April 1981).
https://doi.org/10.1061/jsdeag.0005678
-
Peköz, Teoman / McGuire, William (1981): Sheet Steel Welding. In: Journal of the Structural Division (ASCE), v. 107, n. 8 (August 1981).
https://doi.org/10.1061/jsdeag.0005771
-
Peköz, Teoman (1986): Combined axial load and bending in cold-formed steel members. Vorgetragen bei: IABSE Colloquium: Thin-Walled Metal Structures in Buildings = Structures métalliques à parois minces dans les bâtiments = Dünnwandige Metall-Konstruktionen im Hochbau, Stockholm (Sweden), 1986.
https://doi.org/10.5169/seals-38284
-
DeWolf, John / Peköz, Teoman / Winter, George (1972): Interaction of postcritical plate buckling with overall column buckling of thin-walled members. Vorgetragen bei: Ninth Congress of IABSE = Neuvième Congrès de l'AIPC = Neunter Kongress der IVBH, Amsterdam, Netherlands, 8-13 May 1972.
https://doi.org/10.5169/seals-9547
-
Peköz, Teoman / Winter, George (1980): Cold-formed steel construction. In: IABSE Surveys, v. 4 ( 1980).
https://doi.org/10.5169/seals-45734
-
Casafont, Miquel / Pastor, Maria Magdalena / Roure, Francesc / Peköz, Teoman (2011): An experimental investigation of distortional buckling of steel storage rack columns. In: Thin-Walled Structures, v. 49, n. 8 (August 2011).
https://doi.org/10.1016/j.tws.2011.03.016
-
Casafont, Miquel / Pastor, Magdalena / Bonada, Jordi / Roure, Francesc / Peköz, Teoman (2012): Linear buckling analysis of perforated steel storage rack columns with the Finite Strip Method. In: Thin-Walled Structures, v. 61 (Dezember 2012).
https://doi.org/10.1016/j.tws.2012.07.010
-
Casafont, Miquel / Roure, Francesc / Pastor, Magdalena / Bonada, Jordi / Peköz, Teoman (2013): Distortional buckling test for steel storage rack columns. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 166, n. 8 (September 2013).
https://doi.org/10.1680/stbu.12.00055
-
Yener, Muzaffer / Peköz, Teoman (1983): Limit Design in Cold‐Formed Steel. In: Journal of Structural Engineering (ASCE), v. 109, n. 9 (September 1983).
https://doi.org/10.1061/(asce)0733-9445(1983)109:9(2033)
-
Mulligan, Gale P. / Peköz, Teoman (1984): Locally Buckled Thin‐Walled Columns. In: Journal of Structural Engineering (ASCE), v. 110, n. 11 (November 1984).
https://doi.org/10.1061/(asce)0733-9445(1984)110:11(2635)
-
Yener, Muzaffer / Peköz, Teoman (1985): Partial Moment Redistribution in Cold‐Formed Steel. In: Journal of Structural Engineering (ASCE), v. 111, n. 6 (Juni 1985).
https://doi.org/10.1061/(asce)0733-9445(1985)111:6(1187)
-
Yener, Muzaffer / Peköz, Teoman (1985): Partial Stress Redistribution in Cold‐Formed Steel. In: Journal of Structural Engineering (ASCE), v. 111, n. 6 (Juni 1985).
https://doi.org/10.1061/(asce)0733-9445(1985)111:6(1169)
-
Mulligan, Gale P. / Peköz, Teoman (1987): Local Buckling Interaction in Cold‐Formed Columns. In: Journal of Structural Engineering (ASCE), v. 113, n. 3 (März 1987).
https://doi.org/10.1061/(asce)0733-9445(1987)113:3(604)
-
Weng, C. C. / Peköz, Teoman (1990): Compression Tests of Cold‐Formed Steel Columns. In: Journal of Structural Engineering (ASCE), v. 116, n. 5 (Mai 1990).
https://doi.org/10.1061/(asce)0733-9445(1990)116:5(1230)
-
Weng, C. C. / Peköz, Teoman (1990): Residual Stresses in Cold‐Formed Steel Members. In: Journal of Structural Engineering (ASCE), v. 116, n. 6 (Juni 1990).
https://doi.org/10.1061/(asce)0733-9445(1990)116:6(1611)
-
Miller, Thomas H. / Peköz, Teoman (1993): Behavior of Cold‐Formed Steel Wall Stud Assemblies. In: Journal of Structural Engineering (ASCE), v. 119, n. 2 (Februar 1993).
https://doi.org/10.1061/(asce)0733-9445(1993)119:2(641)
-
Miller, Thomas H. / Peköz, Teoman (1994): Unstiffened Strip Approach for Perforated Wall Studs. In: Journal of Structural Engineering (ASCE), v. 120, n. 2 (Februar 1994).
https://doi.org/10.1061/(asce)0733-9445(1994)120:2(410)
-
Miller, Thomas H. / Peköz, Teoman (1994): Behavior of Gypsum‐Sheathed Cold‐Formed Steel Wall Studs. In: Journal of Structural Engineering (ASCE), v. 120, n. 5 (Mai 1994).
https://doi.org/10.1061/(asce)0733-9445(1994)120:5(1644)
-
Serrette, Reynaud L. / Peköz, Teoman (1995): Distortional Buckling of Thin-Walled Beams/Panels. I: Theory. In: Journal of Structural Engineering (ASCE), v. 121, n. 4 (April 1995).
https://doi.org/10.1061/(asce)0733-9445(1995)121:4(757)
-
Serrette, Reynaud L. / Peköz, Teoman (1995): Distortional Buckling of Thin-Walled Beams/Panels. II: Design Methods. In: Journal of Structural Engineering (ASCE), v. 121, n. 4 (April 1995).
https://doi.org/10.1061/(asce)0733-9445(1995)121:4(767)
-
Miller, Thomas H. / Peköz, Teoman (1994): Load‐Eccentricity Effects on Cold‐Formed Steel Lipped‐Channel Columns. In: Journal of Structural Engineering (ASCE), v. 120, n. 3 (März 1994).
https://doi.org/10.1061/(asce)0733-9445(1994)120:3(805)
-
Casafont, Miquel / Pastor, Maria Magdalena / Roure, Francesc / Bonada, Jordi / Peköz, Teoman (2013): Design of Steel Storage Rack Columns via the Direct Strength Method. In: Journal of Structural Engineering (ASCE), v. 139, n. 5 (Mai 2013).
https://doi.org/10.1061/(asce)st.1943-541x.0000620
-
Roure, Francesc / Somalo, Maria Rosa / Casafont, Miquel / Pastor, Maria Magdalena / Bonada, Jordi / Peköz, Teoman (2013): Determination of beam-to-column connection characteristics in pallet rack structures: a comparison of the EN and ANSI methods and an analysis of the influence of the moment-to-shear ratios. In: Steel Construction, v. 6, n. 2 (Juni 2013).
https://doi.org/10.1002/stco.201310018
-
Brune, Bettina / Peköz, Teoman (2013): Design of cold-formed steel members - comparison of EN 1993-1-3 and Direct Strength Method. In: Steel Construction, v. 6, n. 2 (Juni 2013).
https://doi.org/10.1002/stco.201310020