Jung-Jun Park
- (2024): Physicochemical properties of CO2-cured belite-rich cement with electric arc furnace reduction slag as a partial replacement. In: Developments in the Built Environment, v. 20 (Dezember 2024).
- (2024): Effect of nanobubble water on the mechanical properties and carbon sequestration efficiency of concrete cured under various conditions. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Development of Carbon Consuming Concrete (CCC) using CO2 captured nanobubble water. In: Construction and Building Materials, v. 432 (Juni 2024).
- (2016): 선반 스크랩 보강 시멘트 복합체의 작업성 및 강도 특성 (Workability and Strength Characteristics of Lathe Scrap Reinforced Cementitious Composites). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 20, n. 6 (November 2016).
- (2015): SHPB 시험 및 영상분석을 통한 고변형율 속도 하의 시멘트 복합체 물성 변화 평가 (Evaluation of Material Properties Variations of Cementitious Composites under High Strain Rate by SHPB Test and Image Analysis). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 19, n. 4 (Juli 2015).
- (2014): 팽창재와 수축저감제를 사용한 HPFRCC의 수축 저감 성능 (Shrinkage Reduction Performance of HPFRCC Using Expansive and Srhinkage Reducing Admixtures). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 18, n. 5 (September 2014).
- (2024): Effect of conductive surface-coated polyethylene fiber on the electrical and mechanical properties of high-performance fiber-reinforced cementitious composites. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): Use of electric arc furnace oxidizing slag (EOS) and electric arc furnace reducing slag (ERS) powders in cement pastes for CO2 sequestrations. In: Journal of Building Engineering, v. 84 (Mai 2024).
- (2023): Development of foam concrete with nitrogen oxides removal capability using various forms of titanium dioxide. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).
- (2021): Benefits of TiO2 photocatalyst on mechanical properties and nitrogen oxide removal of ultra-high-performance concrete. In: Construction and Building Materials, v. 285 (Mai 2021).
- (2022): Mechanical properties of high-strength strain-hardening cementitious composites (HS-SHCC) with hybrid supplementary cementitious materials under various curing conditions. In: Journal of Building Engineering, v. 57 (Oktober 2022).
- (2014): Autogenous shrinkage of ultra high performance concrete considering early age coefficient of thermal expansion. In: Structural Engineering and Mechanics, v. 49, n. 6 (März 2014).
- (2017): Fiber pullout behavior of HPFRCC: Effects of matrix strength and fiber type. In: Composite Structures, v. 174 (August 2017).
- (2017): Effects of fiber shape, aspect ratio, and volume fraction on flexural behavior of ultra-high-performance fiber-reinforced cement composites. In: Composite Structures, v. 174 (August 2017).
- (2015): Local bond-slip response of GFRP rebar in ultra-high-performance fiber-reinforced concrete. In: Composite Structures, v. 120 (Februar 2015).
- (2020): Residual performance of HPFRCC exposed to fire – Effects of matrix strength, synthetic fiber, and fire duration. In: Construction and Building Materials, v. 241 (April 2020).
- (2019): Effect of fiber spacing on dynamic pullout behavior of multiple straight steel fibers in ultra-high-performance concrete. In: Construction and Building Materials, v. 210 (Juni 2019).
- (2013): Early age setting, shrinkage and tensile characteristics of ultra high performance fiber reinforced concrete. In: Construction and Building Materials, v. 41 (April 2013).
- (2017): Comparative flexural behavior of ultra-high-performance concrete reinforced with hybrid straight steel fibers. In: Construction and Building Materials, v. 132 (Februar 2017).
- (2017): Development of cost effective ultra-high-performance fiber-reinforced concrete using single and hybrid steel fibers. In: Construction and Building Materials, v. 150 (September 2017).
- (2014): Influence of ring size on the restrained shrinkage behavior of ultra high performance fiber reinforced concrete. In: Materials and Structures, v. 47, n. 7 (Juli 2014).
- (2014): Benefits of using expansive and shrinkage-reducing agents in UHPC for volume stability. In: Magazine of Concrete Research, v. 66, n. 14 (Juli 2014).
- (2013): Drying shrinkage cracking characteristics of ultra-high-performance fibre reinforced concrete with expansive and shrinkage reducing agents. In: Magazine of Concrete Research, v. 65, n. 4 (Februar 2013).
Structurae kooperiert mit
