0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Jeffrey A. Packer ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Bu, Xiao Ding / Davidian, Vartkes / Packer, Jeffrey A. / Li, Wei (2024): RHS Cross-Connections with Fully Offset Branches in Tension. In: Journal of Structural Engineering (ASCE), v. 150, n. 8 (August 2024).

    https://doi.org/10.1061/jsendh.steng-12762

  2. Packer, Jeffrey A. / Frater, George S. (2005): Recommended Effective Throat Sizes for Flare Groove Welds to HSS. In: Engineering Journal, v. 42, n. 1 (März 2005).

    https://doi.org/10.62913/engj.v42i1.840

  3. Bu, Xiao Ding / Packer, Jeffrey A. (2022): RHS-to-RHS Zero-Gap K-Connections. In: Journal of Structural Engineering (ASCE), v. 148, n. 6 (Juni 2022).

    https://doi.org/10.1061/(asce)st.1943-541x.0003343

  4. Kožich, Matyáš / Jehlicka, Petr / Kuříková, Marta / Wald, František / Bu, Xiao‐Ding / Packer, Jeffrey A. / Kabeláč, Jaromír (2021): Strain Design Limit for Hollow Section Joints. In: ce/papers, v. 4, n. 2-4 (September 2021).

    https://doi.org/10.1002/cepa.1577

  5. Seica, Michael V. / Packer, Jeffrey A. (2006): Simplified Numerical Method to Evaluate the Mechanical Strength of Cast Iron Water Pipes. In: Journal of Infrastructure Systems, v. 12, n. 1 (März 2006).

    https://doi.org/10.1061/(asce)1076-0342(2006)12:1(60)

  6. Packer, Jeffrey A. / Davies, Gwynne / Coutie, Martin G. (1982): Ultimate Strength of Gapped Joints in RHS Trusses. In: Journal of the Structural Division (ASCE), v. 108, n. 2 (Februar 1982).

    https://doi.org/10.1061/jsdeag.0005879

  7. Grisaro, Hezi Y. / Seica, Michael V. / Packer, Jeffrey A. / Li, Wei (2021): Strong-axis response of steel I-sections subjected to close-in detonations. In: International Journal of Protective Structures, v. 12, n. 3 (Januar 2021).

    https://doi.org/10.1177/2041419620984487

  8. Kuhn, Jens / Packer, Jeffrey A. / Fan, YuJing (2019): Rectangular hollow section webs under transverse compression. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 46, n. 9 (September 2019).

    https://doi.org/10.1139/cjce-2018-0485

  9. Tousignant, Kyle / Packer, Jeffrey A. (2020): Optimized design of fillet welds for CHS joints according to EN 1993-1-8. In: Steel Construction, v. 13, n. 1 (Februar 2020).

    https://doi.org/10.1002/stco.201900010

  10. Grisaro, Hezi Y. / Packer, Jeffrey A. / Seica, Michael V. (2019): Weak axis response of steel I-sections subjected to close-in detonations. In: Journal of Constructional Steel Research, v. 160 (September 2019).

    https://doi.org/10.1016/j.jcsr.2019.05.025

  11. Packer, Jeffrey A. (1993): Moment connections between rectangular hollow sections. In: Journal of Constructional Steel Research, v. 25, n. 1-2 (Januar 1993).

    https://doi.org/10.1016/0143-974x(93)90052-t

  12. Frater, George S. / Packer, Jeffrey A. (1993): Strain concentration factors in rectangular hollow section truss gap K-connections—An experimental study. In: Journal of Constructional Steel Research, v. 24, n. 2 (Januar 1993).

    https://doi.org/10.1016/0143-974x(93)90057-y

  13. van Wingerde, Arno M. / Packer, Jeffrey A. / Wardenier, Jaap (1997): SCF formulae for fatigue design of K-connections between square hollow sections. In: Journal of Constructional Steel Research, v. 43, n. 1-3 (Juli 1997).

    https://doi.org/10.1016/s0143-974x(97)00026-6

  14. van Wingerde, Arno M. / Packer, Jeffrey A. / Wardenier, Jaap (2001): Simplified SCF formulae and graphs for CHS and RHS K- and KK-connections. In: Journal of Constructional Steel Research, v. 57, n. 3 (März 2001).

    https://doi.org/10.1016/s0143-974x(00)00015-8

  15. Voth, Andrew P. / Packer, Jeffrey A. (2012): Numerical study and design of skewed X-type branch plate-to-circular hollow section connections. In: Journal of Constructional Steel Research, v. 68 (Januar 2012).

    https://doi.org/10.1016/j.jcsr.2011.06.005

  16. Wardenier, Jaap / Packer, Jeffrey A. / Puthli, Ram (2018): Simplified design equations for Plate-to-CHS T and X joints for use in codes. In: Steel Construction, v. 11, n. 2 (Mai 2018).

    https://doi.org/10.1002/stco.201810017

  17. Voth, Andrew P. / Packer, Jeffrey A. (2012): Numerical study and design of T-type branch plate-to-circular hollow section connections. In: Engineering Structures, v. 41 (August 2012).

    https://doi.org/10.1016/j.engstruct.2012.03.034

  18. Packer, Jeffrey A. (1987): Review of American RHS Web Crippling Provisions. In: Journal of Structural Engineering (ASCE), v. 113, n. 12 (Dezember 1987).

    https://doi.org/10.1061/(asce)0733-9445(1987)113:12(2508)

  19. Fan, YuJing / Packer, Jeffrey A. (2017): RHS-to-RHS axially loaded X-connections near an open chord end. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 44, n. 11 (November 2017).

    https://doi.org/10.1139/cjce-2017-0148

  20. Davies, Gwynne / Packer, Jeffrey A. (1982): Predicting the strength of branch plate – RHS connections for punching shear. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 9, n. 3 (September 1982).

    https://doi.org/10.1139/l82-055

  21. Packer, Jeffrey A. / Kremer, John S. M. (1988): A reliability assessment of tubular joint specifications. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 15, n. 2 (April 1988).

    https://doi.org/10.1139/l88-023

  22. Packer, Jeffrey A. (1996): Nailed Tubular Connections under Axial Loading. In: Journal of Structural Engineering (ASCE), v. 122, n. 8 (August 1996).

    https://doi.org/10.1061/(asce)0733-9445(1996)122:8(867)

  23. Tousignant, Kyle / Packer, Jeffrey A. (2017): Numerical Investigation of Fillet Welds in HSS-to-Rigid End-Plate Connections. In: Journal of Structural Engineering (ASCE), v. 143, n. 12 (Dezember 2017).

    https://doi.org/10.1061/(asce)st.1943-541x.0001889

  24. Martinez-Saucedo, Gilberto / Packer, Jeffrey A. (2009): Static Design Recommendations for Slotted End HSS Connections in Tension. In: Journal of Structural Engineering (ASCE), v. 135, n. 7 (Juli 2009).

    https://doi.org/10.1061/(asce)st.1943-541x.0000016

  25. Packer, Jeffrey A. (1984): Web Crippling of Rectangular Hollow Sections. In: Journal of Structural Engineering (ASCE), v. 110, n. 10 (Oktober 1984).

    https://doi.org/10.1061/(asce)0733-9445(1984)110:10(2357)

  26. Elghazouli, Ahmed Y. / Packer, Jeffrey A. (2014): Seismic design solutions for connections to tubular members. In: Steel Construction, v. 7, n. 2 (Juni 2014).

    https://doi.org/10.1002/stco.201410020

  27. Puthli, Ram / Packer, Jeffrey A. (2013): Structural design using cold-formed hollow sections. In: Steel Construction, v. 6, n. 2 (Juni 2013).

    https://doi.org/10.1002/stco.201310013

  28. Willibald, Silke / Puthli, R. S. / Packer, Jeffrey A. (2003): Verdeckte Rechteck-Hohlprofil-Verbindungen unter Zugbelastung. In: Stahlbau, v. 72, n. 5 (Mai 2003).

    https://doi.org/10.1002/stab.200301190

  29. Wardenier, Jaap / Dutta, Dipak / Yeomans, David / Packer, Jeffrey A. / Bucak, Ömer (1996): Utilisation de profils creux de construction dans les applications mécaniques. Guide de dimensionnement n°6. CIDECT - Verlag TÜV Rheinland, Köln (Deutschland).
  30. Dutta, Dipak / Wardenier, Jaap / Yeomans, Noel / Sakae, K. / Bucak, Ömer / Packer, Jeffrey A. (1999): Pour la fabrication, l'assemblage et le montage des structures en profils creux. Guide de dimensionnement n°7. CIDECT - Verlag TÜV Rheinland, Köln (Deutschland).
Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine