0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Hasan Ozer ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Elmagri, Hasna / Kamel, Tarek M. / Ozer, Hasan (2024): Assessment of the effectiveness of cool pavements on outdoor thermal environment in urban areas. In: Building and Environment, v. 266 (Dezember 2024).

    https://doi.org/10.1016/j.buildenv.2024.112095

  2. Beheshti, Masih / Castro, Samuel / Vedula, Naaga / Rahman, Md Nafiur / Rawahi, Muneer Al / Ozer, Hasan (2024): Rate dependent C* fracture parameter using the optimized wedge-split test geometry and vision-based automated crack tip detection. In: Construction and Building Materials, v. 442 (September 2024).

    https://doi.org/10.1016/j.conbuildmat.2024.137649

  3. Rahman, Md Nafiur / Serin, Sercan / Ozer, Hasan (2024): Effectiveness of a Pullout Test Method Developed to Characterize Fundamental Fiber-Matrix Interfacial Mechanisms in Viscoelastic Asphalt Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 7 (Juli 2024).

    https://doi.org/10.1061/jmcee7.mteng-17681

  4. Rahman, Md Nafiur / Castro, Samuel / Noorvand, Hossein / Kaloush, Kamil / Mamlouk, Michael / Ozer, Hasan (2024): Effect of low dosage fiber reinforcement on cracking performance of asphalt concrete. In: Construction and Building Materials, v. 411 (Januar 2024).

    https://doi.org/10.1016/j.conbuildmat.2023.134380

  5. Alrajhi, Ashraf / Ozer, Hasan (2023): Impact of Rest Period and Stress Paths on Asphalt Concrete Permanent Deformation Behavior. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 10 (Oktober 2023).

    https://doi.org/10.1061/jmcee7.mteng-15980

  6. Aker, Saed N. A. / Ozer, Hasan (2023): Cold recycling mix design approach targeting permanent deformation resistance. In: Construction and Building Materials, v. 400 (Oktober 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.132704

  7. Aker, Saed N. A. / Rahman, Md Nafiur / Banda, Sathish / Ozer, Hasan (2023): Comparative Assessment of Liquid Antistripping Agents and Mineral Admixtures in Asphalt Mix Resistance to Moisture Damage. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 9 (September 2023).

    https://doi.org/10.1061/jmcee7.mteng-15131

  8. Gul, Muhammad Aniq / Khan, Kaffayatullah / Islam, Md. Kamrul / Shalabi, Faisal I. / Ozer, Hasan / Hajj, Ramez / Bhasin, Amit (2021): Evaluation of various factors affecting mix design of sulfur-extended asphalt mixes. In: Construction and Building Materials, v. 290 (Juli 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.123199

  9. Alrajhi, Ashraf / Ozer, Hasan / Al-Qadi, Imad L. (2022): Impact of rest period on asphalt concrete permanent deformation. In: Construction and Building Materials, v. 332 (Mai 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.127329

  10. Wang, Hao / Ozer, Hasan / Al-Qadi, Imad L. / Duarte, C. Armando (2013): Analysis of Near-Surface Cracking under Critical Loading Conditions Using Uncracked and Cracked Pavement Models. In: Journal of Transportation Engineering, v. 139, n. 10 (Oktober 2013).

    https://doi.org/10.1061/(asce)te.1943-5436.0000562

  11. Hafeez, Imran / Ozer, Hasan / Al-Qadi, Imad L. (2014): Performance Characterization of Hot In-Place Recycled Asphalt Mixtures. In: Journal of Transportation Engineering, v. 140, n. 8 (August 2014).

    https://doi.org/10.1061/(asce)te.1943-5436.0000679

  12. Dede, Omer Hulusi / Mercan, Nihan / Ozer, Hasan / Dede, Gulgun / Pekarchuk, Oksana / Mercan, Bulent (2021): Thermal insulation characteristics of green wall systems using different growing media. In: Energy and Buildings, v. 240 (Juni 2021).

    https://doi.org/10.1016/j.enbuild.2021.110872

  13. Safi, Fazal R. / Hossain, Kamal / Wu, Shenghua / Al-Qadi, Imad L. / Ozer, Hasan (2018): A model to predict creep compliance of asphalt mixtures containing recycled materials. In: Construction and Building Materials, v. 184 (September 2018).

    https://doi.org/10.1016/j.conbuildmat.2018.06.232

  14. Espinoza-Luque, Arturo F. / Al-Qadi, Imad L. / Ozer, Hasan (2018): Optimizing rejuvenator content in asphalt concrete to enhance its durability. In: Construction and Building Materials, v. 179 (August 2018).

    https://doi.org/10.1016/j.conbuildmat.2018.05.256

  15. Hou, Wenting / Qamhia, Issam / Mwumvaneza, Vincent / Tutumluer, Erol / Ozer, Hasan (2019): Engineering Characteristics and Stabilization Performance of Aggregate Quarry By-Products From Different Sources and Crushing Stages. In: Frontiers in Built Environment, v. 5 (November 2019).

    https://doi.org/10.3389/fbuil.2019.00130

  16. Kim, Robin E. / Kang, Seunggu / Spencer, Billie F. / Al-Qadi, Imad L. / Ozer, Hasan (2017): New Stochastic Approach of Vehicle Energy Dissipation on Nondeformable Rough Pavements. In: Journal of Engineering Mechanics (ASCE), v. 143, n. 4 (April 2017).

    https://doi.org/10.1061/(asce)em.1943-7889.0001192

  17. Kim, Robin E. / Kang, Seunggu / Spencer, Billie F. / Al-Qadi, Imad L. / Ozer, Hasan (2019): Impact of Pavement Roughness and Deflection on Fuel Consumption Using Energy Dissipation. In: Journal of Engineering Mechanics (ASCE), v. 145, n. 10 (Oktober 2019).

    https://doi.org/10.1061/(asce)em.1943-7889.0001653

  18. Fini, Elham H. / Kalberer, Eric W. / Shahbazi, Abolghasem / Basti, Mufeed / You, Zhanping / Ozer, Hasan / Aurangzeb, Qazi (2011): Chemical Characterization of Biobinder from Swine Manure: Sustainable Modifier for Asphalt Binder. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 11 (November 2011).

    https://doi.org/10.1061/(asce)mt.1943-5533.0000237

  19. Zhu, Zehui / Singhvi, Punit / Espinoza-Luque, Arturo Francisco / Ozer, Hasan / Al-Qadi, Imad L. (2019): Influence of mix design parameters on asphalt concrete aging rate using I-FIT specimens. In: Construction and Building Materials, v. 200 (März 2019).

    https://doi.org/10.1016/j.conbuildmat.2018.12.099

  20. Ghauch, Ziad G. / Ozer, Hasan / Al-Qadi, Imad L. (2015): Micromechanical finite element modeling of moisture damage in bituminous composite materials. In: Construction and Building Materials, v. 80 (April 2015).

    https://doi.org/10.1016/j.conbuildmat.2014.12.118

  21. Ozer, Hasan / Al-Qadi, Imad L. / Lambros, John / El-Khatib, Ahmad / Singhvi, Punit / Doll, Berangere (2016): Development of the fracture-based flexibility index for asphalt concrete cracking potential using modified semi-circle bending test parameters. In: Construction and Building Materials, v. 115 (Juli 2016).

    https://doi.org/10.1016/j.conbuildmat.2016.03.144

  22. Wu, Shenghua / Al-Qadi, Imad L. / Lippert, David L. / Ozer, Hasan / Espinoza Luque, Arturo F. / Safi, Fazal R. (2017): Early-age performance characterization of hot-mix asphalt overlay with varying amounts of asphalt binder replacement. In: Construction and Building Materials, v. 153 (Oktober 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.07.114

  23. Yoo, Wonjae / Ozer, Hasan / Ham, Youngjib (2019): System-Level Approach for Identifying Main Uncertainty Sources in Pavement Construction Life-Cycle Assessment for Quantifying Environmental Impacts. In: Journal of Construction Engineering and Management, v. 145, n. 2 (Februar 2019).

    https://doi.org/10.1061/(asce)co.1943-7862.0001598

  24. Aurangzeb, Qazi / Ozer, Hasan / Al-Qadi, Imad L. / Hilton, Harry H. (2017): Viscoelastic and Poisson's ratio characterization of asphalt materials: critical review and numerical simulations. In: Materials and Structures, v. 50, n. 1 (Februar 2017).

    https://doi.org/10.1617/s11527-016-0881-x

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine