Jan Olek 
- (2023): Effect of binder characteristics on workability, hydration, and strength of 0.42 w/b cementitious systems with superabsorbent polymer admixtures. In: Materials and Structures, v. 57, n. 1 (26 Dezember 2023).
- (2023): Field study of the dielectric constant of concrete: A parameter less sensitive to environmental variations than electrical resistivity. In: Journal of Building Engineering, v. 74 (September 2023).
- (2023): Non-traditional aluminosilicate based alkali-activated mortars - statistical optimization of solution parameters and processing conditions for optimal compressive strength, workability and setting time. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2016): Carbonation behavior of hydraulic and non-hydraulic calcium silicates: potential of utilizing low-lime calcium silicates in cement-based materials. In: Journal of Materials Science, v. 51, n. 13 (April 2016).
- (2017): Microscopic features of non-hydraulic calcium silicate cement paste and mortar. In: Cement and Concrete Research, v. 100 (Oktober 2017).
- (2009): Mechanism of stabilization of Na-montmorillonite clay with cement kiln dust. In: Cement and Concrete Research, v. 39, n. 7 (Juli 2009).
- (2008): Influence of chemical and physical characteristics of cement kiln dusts (CKDs) on their hydration behavior and potential suitability for soil stabilization. In: Cement and Concrete Research, v. 38, n. 6 (Juni 2008).
- (2015): Alkali–silica reaction: Kinetics of chemistry of pore solution and calcium hydroxide content in cementitious system. In: Cement and Concrete Research, v. 71 (Mai 2015).
- (2010): An investigation into the influence of inter-aggregate spacing and the extent of the ITZ on properties of Portland cement concretes. In: Cement and Concrete Research, v. 40, n. 11 (November 2010).
- (2005): Influence of lightweight aggregate on the microstructure and durability of mortar. In: Cement and Concrete Research, v. 35, n. 7 (Juli 2005).
- (2006): Characterizing Enhanced Porosity Concrete using electrical impedance to predict acoustic and hydraulic performance. In: Cement and Concrete Research, v. 36, n. 11 (November 2006).
- (2006): Differentiating seawater and groundwater sulfate attack in Portland cement mortars. In: Cement and Concrete Research, v. 36, n. 12 (Dezember 2006).
- (2022): Evaluation of mix design strategies to optimize flow and strength of mortar internally cured with superabsorbent polymers. In: Construction and Building Materials, v. 324 (März 2022).
- (2022): Surfactant-Assisted Purification of an Impure Kaolinite Clay to Improve Its Pozzolanic Reactivity in Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 6 (Juni 2022).
- (1990): Mechanism of plastic shrinkage cracking in portland cement and portland cement-silica fume paste and mortar. In: Cement and Concrete Research, v. 20, n. 1 (Januar 1990).
- (2018): The influence of air cooled blast furnace slag (ACBFS) aggregate on the concentration of sulfates in concrete’s pore solution. In: Construction and Building Materials, v. 168 (April 2018).
- (2020): Effects of Air-Cooled Blast Furnace Slag Aggregate on Pore Solution Chemistry of Cementitious Systems. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 1 (Januar 2020).
- (2019): Phase evolution and strength development during carbonation of low-lime calcium silicate cement (CSC). In: Construction and Building Materials, v. 210 (Juni 2019).
- (2008): Study of the Effectiveness of Cement Kiln Dusts in Stabilizing Na-Montmorillonite Clay. In: Journal of Materials in Civil Engineering (ASCE), v. 20, n. 2 (Februar 2008).
- (2016): Reclaimed Asphalt Pavement Limits to Meet Surface Frictional Requirements. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 1 (Januar 2016).
- (2009): Development of Specification for Accelerated Approval Process of Flowable Fill Mixtures. In: Journal of Materials in Civil Engineering (ASCE), v. 21, n. 12 (Dezember 2009).
- (2012): Assessment of Scaling Durability of Concrete with CFBC Ash by Automatic Classification Rules. In: Journal of Materials in Civil Engineering (ASCE), v. 24, n. 7 (Juli 2012).
- (2008): Effect of Mixture Composition and Initial Curing Conditions on Scaling Resistance of Ternary (OPC/FA/SF) Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 20, n. 10 (Oktober 2008).
- (2015): Predicting modulus elasticity of recycled aggregate concrete using M5′ model tree algorithm. In: Construction and Building Materials, v. 94 (September 2015).
- (2017): Stress-dependent behavior and rutting resistance of modified asphalt binders: An MSCR approach. In: Construction and Building Materials, v. 157 (Dezember 2017).
- (2017): Rheological properties of asphalt binders modified with styrene-butadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA). In: Construction and Building Materials, v. 151 (Oktober 2017).
- (2005): Modeling the Influence of Pore Structure on the Acoustic Absorption of Enhanced Porosity Concrete. In: Journal of Advanced Concrete Technology, v. 3, n. 1 ( 2005).
- (2000): Influence of Flexure-Shear Cracking on Strand Development Length in Prestressed Concrete Members. In: PCI Journal, v. 45, n. 5 (September 2000).
- (2018): Statistical Analysis and Probabilistic Design Approach for Freeze–Thaw Performance of Ordinary Portland Cement Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 11 (November 2018).
- (2006): Water Transport in Concrete Damaged by Tensile Loading and Freeze–Thaw Cycling. In: Journal of Materials in Civil Engineering (ASCE), v. 18, n. 3 (Juni 2006).
Structurae kooperiert mit
