Jae Eun Oh 
- (2024): New cold-bonded artificial aggregate using a Ba(OH)2-activated cementless binder for cement-free concrete production. In: Construction and Building Materials, v. 428 (Mai 2024).
- (2024): Enhancing image resolution in single-side electrical resistance tomography (ERT) by utilizing theoretical sensitivity analysis: Experimental validation and application to cement mortar. In: Journal of Building Engineering, v. 84 (Mai 2024).
- (2024): Development of artificial leak-free phase change material (PCM) aggregates using emulsion technique, cementless binder, and cold-bonded pelletization. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2022): Effect of Silica Fume on the Volume Expansion of Metakaolin-Based Geopolymer Considering the Silicon-to-Aluminum Molar Ratio. In: International Journal of Concrete Structures and Materials, v. 16, n. 1 (Dezember 2022).
- (2012): Microstructural and compositional change of NaOH-activated high calcium fly ash by incorporating Na-aluminate and co-existence of geopolymeric gel and C–S–H(I). In: Cement and Concrete Research, v. 42, n. 5 (Mai 2012).
- (2012): High pressure study of low compressibility tetracalcium aluminum carbonate hydrates 3CaO·Al2O3·CaCO3·11H2O. In: Cement and Concrete Research, v. 42, n. 1 (Januar 2012).
- (2015): Microstructural and strength improvements through the use of Na2CO3 in a cementless Ca(OH)2-activated Class F fly ash system. In: Cement and Concrete Research, v. 67 (Januar 2015).
- (2010): The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash-based geopolymers. In: Cement and Concrete Research, v. 40, n. 2 (Februar 2010).
- (2018): Properties of quicklime(CaO)-activated Class F fly ash with the use of CaCl2. In: Cement and Concrete Research, v. 111 (September 2018).
- (2012): Experimental determination of bulk modulus of 14Å tobermorite using high pressure synchrotron X-ray diffraction. In: Cement and Concrete Research, v. 42, n. 2 (Februar 2012).
- (2023): Mechanical and microstructural properties of lightweight CaO-activated fly ash composites in the presence of magnesium nitrate. In: Journal of Building Engineering, v. 65 (April 2023).
- (2023): Development of near-white surface of Ca(OH)2-Na2CO3-activated coal bottom ash. In: Construction and Building Materials, v. 376 (Mai 2023).
- (2021): Influence of the degree of crystallinity of added nano-alumina on strength and reaction products of the CaO-activated GGBFS system. In: Construction and Building Materials, v. 296 (August 2021).
- (2022): Proposed specific heat capacity model for a concrete wall containing phase change material (PCM) under field experiment conditions. In: Construction and Building Materials, v. 336 (Juni 2022).
- (2022): Predicting airborne chloride deposition in marine bridge structures using an artificial neural network model. In: Construction and Building Materials, v. 337 (Juni 2022).
- (2022): High-accuracy rebar position detection using deep learning–based frequency-difference electrical resistance tomography. In: Automation in Construction, v. 135 (März 2022).
- (2021): Detecting embedded rebar in cement mortar by frequency-difference electrical resistance tomography. In: Automation in Construction, v. 132 (Dezember 2021).
- (2021): Lightweight cementless composite of CaO-CaCl2-CaSO4-activated GGBFS developed as an alternative to lightweight gypsum composite. In: Construction and Building Materials, v. 268 (Januar 2021).
- (2020): Application of micro-CT to Mori-Tanaka method for non-randomly oriented pores in air-entrained cement pastes. In: Construction and Building Materials, v. 255 (September 2020).
- (2020): Prevention of potential strength degradation due to conversion of C2AH8 formed in CaO-Ca(HCOO)2-activated GGBFS binder using CaSO4. In: Construction and Building Materials, v. 253 (August 2020).
- (2020): Effect of magnesium formate as compared with magnesium oxide on the strength enhancement and microstructures of CaO-activated Class F fly ash system. In: Construction and Building Materials, v. 253 (August 2020).
- (2020): Development of a clinker-free white binder of one-part CaO-activated GGBFS with TiO2 addition. In: Construction and Building Materials, v. 248 (Juli 2020).
- (2019): Influence of calcium and sodium nitrate on the strength and reaction products of the CaO-activated GGBFS system. In: Construction and Building Materials, v. 215 (August 2019).
- (2014): Mechanical and microstructural dissimilarities in alkali-activation for six Class F Korean fly ashes. In: Construction and Building Materials, v. 52 (Februar 2014).
- (2015): Microstructural verification of the strength performance of ternary blended cement systems with high volumes of fly ash and GGBFS. In: Construction and Building Materials, v. 95 (Oktober 2015).
- (2016): Production of price-competitive bricks using a high volume of stone powder sludge waste and blast furnace slag through cementless CaO activation. In: Construction and Building Materials, v. 122 (September 2016).
- (2017): Development of strong lightweight cementitious matrix for lightweight concrete simply by increasing a water-to-binder ratio in Ca(OH)2-Na2CO3-activated fly ash system. In: Construction and Building Materials, v. 152 (Oktober 2017).
- (2019): The cation-dependent effects of formate salt additives on the strength and microstructure of CaO-activated fly ash binders. In: Construction and Building Materials, v. 194 (Januar 2019).
- (2014): Microstructural characterization of alkali-activation of six Korean Class F fly ashes with different geopolymeric reactivity and their zeolitic precursors with various mixture designs. In: KSCE Journal of Civil Engineering, v. 19, n. 6 (Dezember 2014).
- (2014): Influence of the structural modification of polycarboxylate copolymer with a low dispersing ability on the set-retarding of Portland cement. In: KSCE Journal of Civil Engineering, v. 19, n. 6 (Dezember 2014).
Structurae kooperiert mit
