0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

R. Narayanan

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Jayachandran, S. Arul / Gopalakrishnan, S. / Narayanan, R. (2001): Explicit incremental matrices for the postbuckling analysis of thin plates with small initial curvature. In: Structural Engineering and Mechanics, v. 12, n. 3 (September 2001).

    https://doi.org/10.12989/sem.2001.12.3.283

  2. Jayachandran, S. Arul / Kalyanaraman, V. / Narayanan, R. (2004): Marguerre shell type secant matrices for the postbuckling analysis of thin, shallow composite shells. In: Structural Engineering and Mechanics, v. 18, n. 1 (Juli 2004).

    https://doi.org/10.12989/sem.2004.18.1.041

  3. Birkenmaier, M. / Narayanan, R. (1982): Fatigue resistance of large high tensile steel stay tendons. Vorgetragen bei: IABSE Colloqium: Fatigue of Steel and Concrete Structures = Fatigue des structures en acier et béton = Ermüdungsverhalten von Stahl- und Betonbauten, Lausanne, Switzerland, 1982.

    https://doi.org/10.5169/seals-28968

  4. Narayanan, R. / Desserich, G. (1980): Vorgespannte Flachdecken - Erfahrungen und Entwicklungen. In: Schweizer Ingenieur und Architekt, v. 98, n. 37 (11 September 1980).

    https://doi.org/10.5169/seals-74205

  5. Horne, M. R. / Narayanan, R. (1976): Strength of axially loaded stiffened panels. In: IABSE Publications, v. 36, n. 1 ( 1976).

    https://doi.org/10.5169/seals-915

  6. Narayanan, R. / Shanmugam, N. E. (1979): An approximate analysis of stiffened flanges. In: IABSE Proceedings, v. 3 ( 1979).

    https://doi.org/10.5169/seals-34087

  7. Prasad, B. K. Raghu / Bharatkumar, B. H. / Murthy, D. S. Ramachandra / Narayanan, R. / Gopalakrishnan, S. (2005): Fracture Mechanics Model for Analysis of Plain and Reinforced High-Performance Concrete Beams. In: Journal of Engineering Mechanics (ASCE), v. 131, n. 8 (August 2005).

    https://doi.org/10.1061/(asce)0733-9399(2005)131:8(831)

  8. Jayachandran, S. Arul / Kalyanaraman, V. / Narayanan, R. (2004): A Co-rotation Based Secant Matrix Procedure for Elastic Postbuckling Analysis of Truss Structures. In: International Journal of Structural Stability and Dynamics, v. 4, n. 1 (März 2004).

    https://doi.org/10.1142/s0219455404001124

  9. Jayachandran, S. Arul / Gopalakrishnan, S. / Narayanan, R. (2003): Improved Secant Matrices for the Postbuckling Analysis of Thin Composite Plates. In: International Journal of Structural Stability and Dynamics, v. 3, n. 3 (September 2003).

    https://doi.org/10.1142/s0219455403000938

  10. Narayanan, R. / Darwish, I. Y. S. (1987): Use of Steel Fibers as Shear Reinforcement. In: ACI Structural Journal, v. 84, n. 3 (Mai 1987).

    https://doi.org/10.14359/2654

  11. Narayanan, R. / Al-Amery, R. I. M. / Roberts, T. M. (1989): Shear strength of composite plate girders with rectangular web cut-outs. In: Journal of Constructional Steel Research, v. 12, n. 2 (Januar 1989).

    https://doi.org/10.1016/0143-974x(89)90030-8

  12. Roberts, T. M. / Edwards, D. N. / Narayanan, R. (1996): Testing and analysis of steel-concrete-steel sandwich beams. In: Journal of Constructional Steel Research, v. 38, n. 3 (Juli 1996).

    https://doi.org/10.1016/0143-974x(96)00022-3

  13. Horne, M. R. / Narayanan, R. (1976): Ultimate Capacity of Longitudinally Stiffened Plates Used in Box Girders. In: Proceedings of the Institution of Civil Engineers, v. 61, n. 2 (Juni 1976).

    https://doi.org/10.1680/iicep.1976.3438

  14. Horne, M. R. / Montague, P. / Narayanan, R. (1977): Influence on Strength of Compression Panel of Stiffener Section, Spacing and Welded Connection. In: Proceedings of the Institution of Civil Engineers, v. 63, n. 1 (März 1977).

    https://doi.org/10.1680/iicep.1977.3290

  15. Narayanan, R. / Toorani-Goloosalar, Z. (1979): Fibre Reinforced Concrete in Pure Torsion and in Combined Bending and Torsion. In: Proceedings of the Institution of Civil Engineers, v. 67, n. 4 (Dezember 1979).

    https://doi.org/10.1680/iicep.1979.2786

  16. Horne, M. R. / Narayanan, R. (1975): An Approximate Method for the Design of Stiffened Steel Compression Panels. In: Proceedings of the Institution of Civil Engineers, v. 59, n. 3 (September 1975).

    https://doi.org/10.1680/iicep.1975.3678

  17. Efthymiou, M. / Narayanan, R. (1982): Current-Induced Forces on Submarine Pipelines: a Discrete Vortex Model. In: Proceedings of the Institution of Civil Engineers, v. 73, n. 1 (März 1982).

    https://doi.org/10.1680/iicep.1982.1874

  18. Narayanan, R. / Rockey, K. C. (1981): Ultimate Load Capacity of Plate Girders with Webs Containing Circular Cut-Outs. In: Proceedings of the Institution of Civil Engineers, v. 71, n. 3 (September 1981).

    https://doi.org/10.1680/iicep.1981.1822

  19. Narayanan, R. / Der Avanessian, N. G. (1983): Equilibrium Solution for Predicting the Strength of Webs with Rectangular Holes. In: Proceedings of the Institution of Civil Engineers, v. 75, n. 2 (Juni 1983).

    https://doi.org/10.1680/iicep.1983.1503

  20. Narayanan, R. / Deraveanessian, N. G. (1984): An Equilibrium Method for Assessing the Strength of Plate Girders with Reinforced Web Openings. In: Proceedings of the Institution of Civil Engineers, v. 77, n. 2 (Juni 1984).

    https://doi.org/10.1680/iicep.1984.1238

  21. Narayanan, R. / Chan, S. L. (1985): Ultimate capacity of plates containing holes under linearly varying edge displacements. In: Computers & Structures, v. 21, n. 4 (Januar 1985).

    https://doi.org/10.1016/0045-7949(85)90160-9

  22. Reinschmidt, Kenneth F. / Narayanan, R. (1975): The optimum shape of cooling towers. In: Computers & Structures, v. 5, n. 5-6 (Dezember 1975).

    https://doi.org/10.1016/0045-7949(75)90039-5

  23. Rao, G. Jayarama / Rathinam, P. / Narayanan, R. (1996): Development of hybrid method coupling moire interferometry and finite element analysis. In: Computers & Structures, v. 60, n. 3 (August 1996).

    https://doi.org/10.1016/0045-7949(95)00412-2

  24. Omid, M. H. / Narayanan, R. / Nalluri, C. (2002): Erosion of a sediment deposit from a rigid rectangular channel by clear water. In: Proceedings of the Institution of Civil Engineers - Water and Maritime Engineering, v. 154, n. 1 (März 2002).

    https://doi.org/10.1680/wame.2002.154.1.63

  25. Narayanan, R. / Aminzadeh, A. (2008): Erosion of sediments beneath an oscillating cylinder. In: Proceedings of the Institution of Civil Engineers - Maritime Engineering, v. 161, n. 1 (März 2008).

    https://doi.org/10.1680/maen.2008.161.1.33

  26. Omid, M. H. / Narayanan, R. / Nalluri, C. (2002): Erosion of a sediment deposit from a rigid rectangular channel by clear water. In: Proceedings of the Institution of Civil Engineers - Maritime Engineering, v. 154, n. 1 (März 2002).

    https://doi.org/10.1680/maen.154.1.63.38526

  27. Bharatkumar, B. H. / Raghuprasad, B. K. / Ramachandramurthy, D. S. / Narayanan, R. / Gopalakrishnan, S. (2005): Effect of fly ash and slag on the fracture characteristics of high performance concrete. In: Materials and Structures, v. 38, n. 1 (Januar 2005).

    https://doi.org/10.1007/bf02480576

  28. Narayanan, R. / Darwish, I. Y. S. (1988): Shear in Mortar Beams Containing Fibers and Fly Ash. In: Journal of Structural Engineering (ASCE), v. 114, n. 1 (Januar 1988).

    https://doi.org/10.1061/(asce)0733-9445(1988)114:1(84)

  29. Narayanan, R. / Kareem-Palanjian, A. S. (1984): Torsion in plain and prestressed concrete beams containing polypropylene fibres. In: Magazine of Concrete Research, v. 36, n. 126 (März 1984).

    https://doi.org/10.1680/macr.1984.36.126.22

  30. Narayanan, R. / Darwish, I. Y. S. (1987): Punching shear tests on steel-fibre-reinforced micro-concrete slabs. In: Magazine of Concrete Research, v. 39, n. 138 (März 1987).

    https://doi.org/10.1680/macr.1987.39.138.42

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine