0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Tsuneyoshi Nakamura

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Morisako, Kiyotaka / Ishida, Shuzo / Nakamura, Tsuneyoshi / Ishizaki, Hatsuo (1981): Dynamic Collapse of Frames Under Wind Disturbances. In: Journal of the Structural Division (ASCE), v. 107, n. 12 (Dezember 1981).

    https://doi.org/10.1061/jsdeag.0005844

  2. Yokoo, Yoshitsura / Nakamura, Tsuneyoshi / Komiyama, Toshiro (1973): Nonstationary hysteretic stress-strain relations of wide-flange steels and moment-curvature relations under presence of axial force. Vorgetragen bei: IABSE Symposium: Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, Lisbon, Portugal, 1973.

    https://doi.org/10.5169/seals-13760

  3. Yokoo, Yoshitsura / Nakamura, Tsuneyoshi / Ishida, Shuzo (1973): Cyclic load-deflection curves of multi-storey strain-hardening frames subjected to dead and repeated alternating lateral loadings. Vorgetragen bei: IABSE Symposium: Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, Lisbon, Portugal, 1973.

    https://doi.org/10.5169/seals-13751

  4. Nagase, Tadashi / Nakamura, Tsuneyoshi (1976): Minimum weight plastic design of multi-story plane frames for five sets of design loads. Vorgetragen bei: Tenth Congress of IABSE = Dixième Congrès de l'AIPC = Zehnter Kongress der IVBH, Tokyo, Japan, 6-11 September 1976.

    https://doi.org/10.5169/seals-10415

  5. Nakamura, Tsuneyoshi (1976): Minimum weight plastic design of regular rectangular plane frames. Vorgetragen bei: Tenth Congress of IABSE = Dixième Congrès de l'AIPC = Zehnter Kongress der IVBH, Tokyo, Japan, 6-11 September 1976.

    https://doi.org/10.5169/seals-10509

  6. Ohsaki, M. / Nakamura, Tsuneyoshi (1994): Optimum design with imperfection sensitivity coefficients for limit point loads. In: Structural Optimization, v. 8, n. 2-3 (Oktober 1994).

    https://doi.org/10.1007/bf01743310

  7. Takewaki, Izuru / Nakamura, Tsuneyoshi (1997): Hybrid Inverse Mode Problem for Structure-Foundation Systems. In: Journal of Engineering Mechanics (ASCE), v. 123, n. 4 (April 1997).

    https://doi.org/10.1061/(asce)0733-9399(1997)123:4(312)

  8. Takewaki, Izuru / Nakamura, Tsuneyoshi (1995): Hybrid Inverse Mode Problems for FEM-Shear Models. In: Journal of Engineering Mechanics (ASCE), v. 121, n. 8 (August 1995).

    https://doi.org/10.1061/(asce)0733-9399(1995)121:8(873)

  9. Nakamura, Tsuneyoshi / Takewaki, Izuru (1985): Optimum Building Design for Forced‐Mode Compliance. In: Journal of Engineering Mechanics (ASCE), v. 111, n. 9 (September 1985).

    https://doi.org/10.1061/(asce)0733-9399(1985)111:9(1159)

  10. Takewaki, Izuru / Nakamura, Tsuneyoshi / Hirayama, Kitae (1998): Seismic frame design via inverse mode design of frame-ground systems. In: Soil Dynamics and Earthquake Engineering, v. 17, n. 3 (Januar 1998).

    https://doi.org/10.1016/s0267-7261(97)00041-9

  11. Nakamura, Tsuneyoshi / Ohsaki, Makoto (1989): Sequential generator of earthquake-response constrained trusses for design strain ranges. In: Computers & Structures, v. 33, n. 6 (Januar 1989).

    https://doi.org/10.1016/0045-7949(89)90480-x

  12. Nakamura, Tsuneyoshi / Tsuji, M. / Takewaki, I. (1993): Design of steel frames for specified seismic member ductility via inverse eigenmode formulation. In: Computers & Structures, v. 47, n. 6 (Juni 1993).

    https://doi.org/10.1016/0045-7949(93)90306-x

  13. Nakamura, Tsuneyoshi / Yamane, Takashi (1986): Optimum design and earthquake-response constrained design of elastic shear buildings. In: Earthquake Engineering and Structural Dynamics, v. 14, n. 5 (September 1986).

    https://doi.org/10.1002/eqe.4290140508

  14. Ohsaki, M. / Nakamura, Tsuneyoshi / Kohiyama, M. (1997): Shape Optimization of a Double-Layer Space Truss Described by a Parametric Surface. In: International Journal of Space Structures, v. 12, n. 2 (Juni 1997).

    https://doi.org/10.1177/026635119701200205

  15. Ohsaki, M. / Nakamura, Tsuneyoshi / Isshiki, Y. (1998): Shape-Size Optimization of Plane Trusses with Designer's Preference. In: Journal of Structural Engineering (ASCE), v. 124, n. 11 (November 1998).

    https://doi.org/10.1061/(asce)0733-9445(1998)124:11(1323)

  16. Nakamura, Tsuneyoshi / Takewaki, Izuru (1989): Ductility Design Via Optimum Design of Nonlinear Elastic Frames. In: Journal of Structural Engineering (ASCE), v. 115, n. 3 (März 1989).

    https://doi.org/10.1061/(asce)0733-9445(1989)115:3(608)

  17. Nakamura, Tsuneyoshi / Nakamura, Yutaka (1993): Stiffness Design of 3‐D Shear Buildings for Specified Seismic Drifts. In: Journal of Structural Engineering (ASCE), v. 119, n. 1 (Januar 1993).

    https://doi.org/10.1061/(asce)0733-9445(1993)119:1(50)

  18. Nakamura, Tsuneyoshi / Ito, Hitoshi (2001): Inverse Design of Frames for Specified Second-Order Bending Strains. In: Journal of Structural Engineering (ASCE), v. 127, n. 5 (Mai 2001).

    https://doi.org/10.1061/(asce)0733-9445(2001)127:5(579)

  19. Ito, Hitoshi / Nakamura, Tsuneyoshi (2006): Sequential Hybrid Inverse Mapping for State-Specified Design of Frames. In: Journal of Structural Engineering (ASCE), v. 132, n. 9 (September 2006).

    https://doi.org/10.1061/(asce)0733-9445(2006)132:9(1441)

  20. Nakamura, Tsuneyoshi / Tsuji, Masaaki (1996): Inverse Damping Perturbation for Stiffness Design of Shear Buildings. In: Journal of Structural Engineering (ASCE), v. 122, n. 6 (Juni 1996).

    https://doi.org/10.1061/(asce)0733-9445(1996)122:6(617)

  21. Tsuji, Masaaki / Nakamura, Tsuneyoshi (1996): Optimum viscous dampers for stiffness design of shear buildings. In: The Structural Design of Tall Buildings, v. 5, n. 3 ( 1996).

    https://doi.org/10.1002/(SICI)1099-1794(199609)5:3<217::AID-TAL70>3.0.CO;2-R

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine