0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Thomas M. Murray

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Mohr, Benjamin A. / Murray, Thomas M. (2008): Bending Strength of Steel Bracket and Splice Plates. In: Engineering Journal, v. 45, n. 2 (Juni 2008).

    https://doi.org/10.62913/engj.v45i2.936

  2. Hanagan, Linda M. / Murray, Thomas M. (1998): Experimental Implementation of Active Control to Reduce Annoying Floor Vibrations. In: Engineering Journal, v. 35, n. 4 (Dezember 1998).

    https://doi.org/10.62913/engj.v35i4.712

  3. Allen, D. E. / Murray, Thomas M. (1993): Design Criterion for Vibrations Due to Walking. In: Engineering Journal, v. 30, n. 4 (Dezember 1993).

    https://doi.org/10.62913/engj.v30i4.1281

  4. Mercado-Celin, Maria A. / Eatherton, Matthew R. / Murray, Thomas M. (2024): Four-Bolt Unstiffened End-Plate Moment Connections with 36-in.-Deep Beams for Intermediate Moment Frames. In: Engineering Journal, v. 61, n. 1 (Januar 2024).

    https://doi.org/10.62913/engj.v61i1.1317

  5. Murray, Thomas M. / Kukreti, Anant R. (1988): Design of 8-bolt Stiffened Moment End Plates. In: Engineering Journal, v. 25, n. 2 (Juni 1988).

    https://doi.org/10.62913/engj.v25i2.500

  6. Murray, Thomas M. (1983): Design of Lightly Loaded Steel Column Base Plates. In: Engineering Journal, v. 20, n. 4 (Dezember 1983).

    https://doi.org/10.62913/engj.v20i4.402

  7. Hendrick, Alan / Murray, Thomas M. (1984): Column Web Compression Strength at End-Plate Connections. In: Engineering Journal, v. 21, n. 3 (September 1984).

    https://doi.org/10.62913/engj.v21i3.421

  8. Curtis, Larry E. / Murray, Thomas M. (1989): Column Flange Strength at Moment End-Plate Connections. In: Engineering Journal, v. 26, n. 2 (Juni 1989).

    https://doi.org/10.62913/engj.v26i2.519

  9. Murray, Thomas M. (1991): Building Floor Vibrations. In: Engineering Journal, v. 28, n. 3 (September 1991).

    https://doi.org/10.62913/engj.v28i3.1275

  10. Murray, Thomas M. (1981): Acceptability Criterion for Occupant-Induced Floor Vibrations. In: Engineering Journal, v. 18, n. 2 (Juni 1981).

    https://doi.org/10.62913/engj.v18i2.359

  11. Murray, Thomas M. / Hendrick, William E. (1977): Floor Vibrations and Cantilevered Construction. In: Engineering Journal, v. 14, n. 3 (September 1977).

    https://doi.org/10.62913/engj.v14i3.296

  12. Murray, Thomas M. (1975): Design to Prevent Floor Vibrations. In: Engineering Journal, v. 12, n. 3 (September 1975).

    https://doi.org/10.62913/engj.v12i3.248

  13. Pabian, Scott / Thomas, Aaron / Davis, Brad / Murray, Thomas M.: Investigation of Floor Vibration Evaluation Criteria Using an Extensive Database of Floors. Vorgetragen bei: Structures Congress 2013, Pittsburgh, Pennsylvania, May 2-4, 2013.

    https://doi.org/10.1061/9780784412848.216

  14. Barrett, Anthony R. / Avci, Onur / Setareh, Mehdi / Murray, Thomas M. (2006): Observations from Vibration Testing of In-Situ Structures. Vorgetragen bei: Structures Congress 2006, May 18-21, 2006, St. Louis, Missouri, United States.

    https://doi.org/10.1061/40889(201)65

  15. Murray, Thomas M. / Willems, Nicholas (1971): Analysis of Inelastic Suspension Structures. In: Journal of the Structural Division (ASCE), v. 97, n. 12 (Dezember 1971).

    https://doi.org/10.1061/jsdeag.0003067

  16. Hillman, John R. / Murray, Thomas M. (1990): Innovative lightweight floor systems for steel framed buildings. Vorgetragen bei: IABSE Symposium: Mixed Structures, including New Materials = Construction mixte acier, béton et nouveaux matériaux = Misch- und Verbundbauweisen einschliesslich neuer Baustoffe, Brussels, Belgium, 1990.

    https://doi.org/10.5169/seals-46563

  17. Easterling, W. Samuel / Murray, Thomas M. (1994): Composite long-span joists. Vorgetragen bei: IABSE Symposium: Places of Assembly and Long-Span Building Structures, Birmingham, United Kingdom, 1994.

    https://doi.org/10.5169/seals-54120

  18. Murray, Thomas M. / Allen, David E. (1993): Floor vibrations: a new design approach. Vorgetragen bei: International Colloqium: Structural Serviceability of Buildings, Göteborg, Sweden, 1993.

    https://doi.org/10.5169/seals-52553

  19. Wei, Gengrui / Koutromanos, Ioannis / Murray, Thomas M. / Eatherton, Matthew R. (2019): Investigating partial tension field action in gable frame panel zones. In: Journal of Constructional Steel Research, v. 162 (November 2019).

    https://doi.org/10.1016/j.jcsr.2019.105746

  20. Sanchez, T. Andres / Davis, Brad / Murray, Thomas M. (2011): Floor Vibration Characteristics of Long Span Composite Slab Systems. Vorgetragen bei: Structures Congress 2011, Las Vegas, Nevada, April 14-16, 2011.

    https://doi.org/10.1061/41171(401)32

  21. Seek, Michael W. / Murray, Thomas M. (2008): Lateral restraint forces in Z-section roof systems using the component stiffness method. In: Journal of Constructional Steel Research, v. 64, n. 12 (Dezember 2008).

    https://doi.org/10.1016/j.jcsr.2007.12.010

  22. Kukreti, Anant R. / Murray, Thomas M. / Ghassemieh, Mehdi (1989): Finite element modeling of large capacity stiffened steel tee-hanger connections. In: Computers & Structures, v. 32, n. 2 (Januar 1989).

    https://doi.org/10.1016/0045-7949(89)90052-7

  23. Murray, Thomas M. / Elhouar, Souhail (1994): North American approach to the design of continuous Z- and C- purlins for gravity loading with experimental verification. In: Engineering Structures, v. 16, n. 5 (Juli 1994).

    https://doi.org/10.1016/0141-0296(94)90026-4

  24. Kukreti, Anant R. / Ghassemieh, Mehdi / Murray, Thomas M. (1990): Behavior and Design of Large‐Capacity Moment End Plates. In: Journal of Structural Engineering (ASCE), v. 116, n. 3 (März 1990).

    https://doi.org/10.1061/(asce)0733-9445(1990)116:3(809)

  25. Harris, Devin K. / Cousins, Tommy / Sotelino, Elisa D. / Murray, Thomas M. (2010): Flexural Lateral Load Distribution Characteristics of Sandwich Plate System Bridges: Parametric Investigation. In: Journal of Bridge Engineering (ASCE), v. 15, n. 6 (November 2010).

    https://doi.org/10.1061/(asce)be.1943-5592.0000105

  26. Hanagan, Linda M. / Murray, Thomas M. (1997): Active Control Approach for Reducing Floor Vibrations. In: Journal of Structural Engineering (ASCE), v. 123, n. 11 (November 1997).

    https://doi.org/10.1061/(asce)0733-9445(1997)123:11(1497)

  27. Avci, Onur / Murray, Thomas M. (2012): Effect of Bottom Chord Extensions on the Static Flexural Stiffness of Open-Web Steel Joists. In: Journal of Performance of Constructed Facilities (ASCE), v. 26, n. 5 (Oktober 2012).

    https://doi.org/10.1061/(asce)cf.1943-5509.0000262

  28. Harris, Devin K. / Cousins, Tommy / Murray, Thomas M. / Sotelino, Elisa D. (2008): Field Investigation of a Sandwich Plate System Bridge Deck. In: Journal of Performance of Constructed Facilities (ASCE), v. 22, n. 5 (Oktober 2008).

    https://doi.org/10.1061/(asce)0887-3828(2008)22:5(305)

  29. Sumner, Emmett A. / Murray, Thomas M. (2002): Behavior of Extended End-Plate Moment Connections Subject to Cyclic Loading. In: Journal of Structural Engineering (ASCE), v. 128, n. 4 (April 2002).

    https://doi.org/10.1061/(asce)0733-9445(2002)128:4(501)

  30. Carter, Charles J. / Murray, Thomas M. / Thornton, William A. (2000): Cost-effective steel building design. In: Progress in Structural Engineering and Materials, v. 2, n. 1 (Januar 2000).

    https://doi.org/10.1002/(sici)1528-2716(200001/03)2:1<16::aid-pse3>3.0.co;2-q

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine