0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

P. Muñoz ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Muñoz, P. / Letelier, V. / Muñoz, L. / Gencel, Osman / Sutcu, Mucahit / Vasic, Milica (2023): Assessing technological properties and environmental impact of fired bricks made by partially adding bottom ash from an industrial approach. In: Construction and Building Materials, v. 396 (September 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.132338

  2. Muñoz, P. / Domínguez, D. / Sanchez-Vazquez, R. / Letelier, V. / Gencel, O. (2023): Building decarbonization by means of ancient techniques. Assessment of environmental impact, energy performance and mechanical safety. In: Journal of Building Engineering, v. 74 (September 2023).

    https://doi.org/10.1016/j.jobe.2023.106896

  3. Domínguez, D. / Muñoz, P. / Muñoz, L. (2022): Choosing the Most Suitable Antiseismic Device Technology for High-Rise Buildings, by Considering the Mechanical Response and Environmental Impact. In: International Journal of Civil Engineering, v. 21, n. 5 (Dezember 2022).

    https://doi.org/10.1007/s40999-022-00798-x

  4. Muñoz, P. / González, C. / Recio, R. / Gencel, O. (2022): The role of specific heat capacity on building energy performance and thermal discomfort. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).

    https://doi.org/10.1016/j.cscm.2022.e01423

  5. Muñoz, P. / Letelier, V. / Muñoz, L. / Bustamante, M. A. / Gencel, O. / Sutcu, M. (2021): The combined effect of bottom ashes and cellulose fibers on fired clay bricks. In: Construction and Building Materials, v. 301 (September 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.124307

  6. Muñoz, P. / Domínguez, D. / Morales, M. P. / Muñoz, L. / Sanchez-Vazquez, R. (2021): The effect of infill walls made by eco materials on mechanical response, energy performance and co2 print of residential and non-residential low-rise buildings. In: Energy and Buildings, v. 243 (Juli 2021).

    https://doi.org/10.1016/j.enbuild.2021.110996

  7. Morales, M. P. / Muñoz, P. / Juárez, M. C. / Mendívil, M. A. / Muñoz, L. (2016): Energy Efficiency in Buildings: Study of Single-Leaf Walls Made with Clay Bricks. In: Journal of Energy Engineering, v. 142, n. 1 (März 2016).

    https://doi.org/10.1061/(asce)ey.1943-7897.0000277

  8. Muñoz, P. / Letelier, V. / Muñoz, L. / Zamora, D. (2021): Assessment of technological performance of extruded earth block by adding bottom biomass ashes. In: Journal of Building Engineering, v. 39 (Juli 2021).

    https://doi.org/10.1016/j.jobe.2021.102278

  9. Juárez, M. C. / Morales, M. P. / Muñoz, P. / Mendívil, M. A. / Olasolo, P. (2016): Influence of the type of lightweight clay brick on the equivalent thermal transmittance of different types of façades on buildings. In: Materiales de Construccion, v. 66, n. 323 (August 2016).

    https://doi.org/10.3989/mc.2016.08115

  10. Morales, M. P. / Juárez, M. C. / Muñoz, P. / Gomez, J. A. (2011): Study of the geometry of a voided clay brick using non-rectangular perforations to optimise its thermal properties. In: Energy and Buildings, v. 43, n. 9 (September 2011).

    https://doi.org/10.1016/j.enbuild.2011.06.006

  11. Juárez, M. C. / Morales, M. P. / Muñoz, P. / Mendívil, M. A. (2012): Influence of horizontal joint on the thermal properties of single-leaf walls with lightweight clay blocks. In: Energy and Buildings, v. 49 (Juni 2012).

    https://doi.org/10.1016/j.enbuild.2012.02.033

  12. Muñoz, P. / Juárez, M. C. / Morales, M. P. / Mendívil, M. A. (2013): Improving the thermal transmittance of single-brick walls built of clay bricks lightened with paper pulp. In: Energy and Buildings, v. 59 (April 2013).

    https://doi.org/10.1016/j.enbuild.2012.12.022

  13. Morales, M. P. / Juárez, M. C. / Muñoz, P. / Mendívil, M. A. / Ruiz, J. A. (2014): Possibilities for improving the equivalent thermal transmittance of single-leaf walls for buildings. In: Energy and Buildings, v. 69 (Februar 2014).

    https://doi.org/10.1016/j.enbuild.2013.11.038

  14. Muñoz, P. / Letelier, V. / Muñoz, L. / Bustamante, M. A. (2020): Adobe bricks reinforced with paper & pulp wastes improving thermal and mechanical properties. In: Construction and Building Materials, v. 254 (September 2020).

    https://doi.org/10.1016/j.conbuildmat.2020.119314

  15. Domínguez-Santos, D. / Letelier, V. / Muñoz, P. (2020): Seismic capacity of 2- and 3-storey RC buildings with eco-concrete made by using residues for replacing natural aggregates. In: Journal of Building Engineering, v. 28 (März 2020).

    https://doi.org/10.1016/j.jobe.2019.101086

  16. Muñoz, P. / Mendívil, M. A. / Letelier, V. / Morales, M. P. (2019): Thermal and mechanical properties of fired clay bricks made by using grapevine shoots as pore forming agent. Influence of particle size and percentage of replacement. In: Construction and Building Materials, v. 224 (November 2019).

    https://doi.org/10.1016/j.conbuildmat.2019.07.066

  17. Morales, M. P. / Juárez, M. C. / López-Ochoa, L. M. / Muñoz, P. (2012): Influence of tongue and groove system on the thermal properties of large-format voided clay bricks for single-leaf walls. In: Construction and Building Materials, v. 30 (Mai 2012).

    https://doi.org/10.1016/j.conbuildmat.2011.12.006

  18. Muñoz, P. / Morales, M. P. / Mendívil, M. A. / Juárez, M. C. / Muñoz, L. (2014): Using of waste pomace from winery industry to improve thermal insulation of fired clay bricks. Eco-friendly way of building construction. In: Construction and Building Materials, v. 71 (November 2014).

    https://doi.org/10.1016/j.conbuildmat.2014.08.027

  19. Mendívil, M. A. / Muñoz, P. / Morales, M. P. / Letelier, V. / Juárez, M. C. (2017): Grapevine Shoots for Improving Thermal Properties of Structural Fired Clay Bricks: New Method of Agricultural-Waste Valorization. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 8 (August 2017).

    https://doi.org/10.1061/(asce)mt.1943-5533.0001892

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine