Muhammad Junaid Munir 
- (2024): Enhancing sustainability in concrete production: A novel compression casting technique for optimizing cement usage. In: Journal of Building Engineering, v. 95 (Oktober 2024).
- (2024): Bond Stress Behavior of a Steel Reinforcing Bar Embedded in Geopolymer Concrete Incorporating Natural and Recycled Aggregates. In: Infrastructures, v. 9, n. 6 (28 Mai 2024).
- (2024): Joint Behavior of Full-Scale Precast Concrete Pipe Infrastructure: Experimental and Numerical Analysis. In: Infrastructures, v. 9, n. 4 (9 April 2024).
- (2024): Investigation of electromagnetic interference shielding performance of ultra-high-performance mortar incorporating single-walled carbon nanotubes and steel fiber. In: Journal of Building Engineering, v. 89 (Juli 2024).
- (2023): Experimental and Analytical Investigations on Shear Performance of Ambient-Cured Reinforced Geopolymer Concrete Beams. In: Buildings, v. 14, n. 1 (31 Dezember 2023).
- (2023): Effect of mix design parameters on the behavior of compression cast concrete. In: Journal of Building Engineering, v. 76 (Oktober 2023).
- (2023): Shear Behavior of Geopolymer Concrete Slender Beams. In: Buildings, v. 13, n. 5 (27 April 2023).
- (2023): Development of unified elastic modulus model of natural and recycled aggregate concrete for structural applications. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2022): Recycling of metallurgical wastes in ceramics: A sustainable approach. In: Construction and Building Materials, v. 349 (September 2022).
- (2022): Influence of micro Fe2O3 and MgO on the physical and mechanical properties of the zeolite and kaolin based geopolymer mortar. In: Journal of Building Engineering, v. 52 (Juli 2022).
- (2021): Evolutionary artificial intelligence approach for performance prediction of bio-composites. In: Construction and Building Materials, v. 290 (Juli 2021).
- (2022): Development of a novel compressive strength design equation for natural and recycled aggregate concrete through advanced computational modeling. In: Journal of Building Engineering, v. 55 (September 2022).
- (2022): Influence of off-spec fly ash and surfactant-coated nano-iron-oxide on the fresh and hardened properties of cement pastes: An exploratory study. In: Journal of Building Engineering, v. 48 (Mai 2022).
- (2021): Influence of bottom ash and polypropylene fibers on the physico-mechanical, durability and thermal performance of foam concrete: An experimental investigation. In: Construction and Building Materials, v. 306 (November 2021).
- (2021): Feasibility of using clay-free bricks manufactured from water treatment sludge, glass, and marble wastes: An exploratory study. In: Construction and Building Materials, v. 298 (September 2021).
- (2021): A study on magnesium phosphate cement mortars reinforced by polyvinyl alcohol fibers. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2021): Synergistic effect of rice husk, glass and marble sludges on the engineering characteristics of eco-friendly bricks. In: Journal of Building Engineering, v. 42 (Oktober 2021).
- (2021): Study of a new capillary active bio-insulation material by hygrothermal simulation of multilayer wall. In: Energy and Buildings, v. 234 (März 2021).
- (2021): Axial stress-strain performance of steel spiral confined acetic acid immersed and mechanically rubbed recycled aggregate concrete. In: Journal of Building Engineering, v. 34 (Februar 2021).
- (2021): Investigation of thermal performance of concrete incorporating different types of recycled coarse aggregates. In: Construction and Building Materials, v. 270 (Februar 2021).
- (2018): Thermal performance enhancement of eco-friendly bricks incorporating agro-wastes. In: Energy and Buildings, v. 158 (Januar 2018).
- (2020): Effect of recycled aggregate treatment techniques on the durability of concrete: A comparative evaluation. In: Construction and Building Materials, v. 264 (Dezember 2020).
- (2020): Experimental study of fibre-reinforced interlocking mud bricks under compressive test. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 173, n. 4 (August 2020).
- (2020): Development of a unified model to predict the axial stress–strain behavior of recycled aggregate concrete confined through spiral reinforcement. In: Engineering Structures, v. 218 (September 2020).
- (2019): Suitability of Gini moraines as natural pozzolanic material for Diamer Basha dam project. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 172, n. 4 (August 2019).
- (2017): Efficiency of waste marble powder in controlling alkali–silica reaction of concrete: A sustainable approach. In: Construction and Building Materials, v. 154 (November 2017).
- (2017): Pozzolanic reaction of sugarcane bagasse ash and its role in controlling alkali silica reaction. In: Construction and Building Materials, v. 148 (September 2017).
- (2018): Role of test method in detection of alkali–silica reactivity of concrete aggregates. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 171, n. 5 (Oktober 2018).
- (2016): Exploratory study on the effect of waste rice husk and sugarcane bagasse ashes in burnt clay bricks. In: Journal of Building Engineering, v. 7 (September 2016).
- (2018): Effect of macro-synthetic fibers on the fracture energy and mechanical behavior of recycled aggregate concrete. In: Construction and Building Materials, v. 189 (November 2018).
Structurae kooperiert mit
