Gabriele Milani 
- : Non‐linear time history analyses of a rigid block isolated with unbonded fiber‐reinforced elastomeric isolators (UFREIs): A comparison between 3D finite element and phenomenological models. In: Earthquake Engineering and Structural Dynamics.
- (2024): Non-linear 1D 16-DOF finite element for Fiber Reinforced Cementitious Matrix (FRCM) strengthening systems. In: Computers & Structures, v. 300 (August 2024).
- (2024): Novel block element with axial-only deformation for limit analysis of masonry arch bridges. In: Computers & Structures, v. 298 (Juli 2024).
- (2024): Mechanistic model for the compression strength prediction of masonry columns strengthened with fibre–polymer composites. In: Composite Structures, v. 338 (Juni 2024).
- (2024): A novel analytical model for fiber reinforced cementitious matrix FRCM coupons subjected to tensile tests. In: Composite Structures, v. 327 (Januar 2024).
- (2024): Numerical and experimental study on the low temperature rheological performance of basalt fiber reinforced asphalts. In: Construction and Building Materials, v. 412 (Januar 2024).
- (2023): Modeling of shear-lap tests of flat and curved masonry specimens strengthened by FRCM. In: Structures, v. 52 (Juni 2023).
- (2022): A novel Lower Bound Limit Analysis model with hexahedron elements for the failure analysis of laboratory and thin infill masonry walls in two-way bending. In: Engineering Structures, v. 265 (August 2022).
- (2021): Nonlinear finite and discrete element simulations of multi-storey masonry walls. In: Bulletin of Earthquake Engineering, v. 20, n. 4 (November 2021).
- (2021): Nonlinear modeling of the seismic response of masonry structures: critical review and open issues towards engineering practice. In: Bulletin of Earthquake Engineering, v. 20, n. 4 (November 2021).
- (2021): Longhu pagoda: Advanced numerical investigations for assessing performance at failure under horizontal loads. In: Engineering Structures, v. 244 (Oktober 2021).
- (2021): Mechanical model based on a BVP for FRPs applied on flat and curved masonry pillars with anchor spikes. In: Composite Structures, v. 273 (Oktober 2021).
- (2021): Numerical study of the bond behavior of DMF systems. In: Structures, v. 31 (Juni 2021).
- (2021): Modeling of FRCM strengthening systems externally applied on curved masonry substrates. In: Engineering Structures, v. 233 (April 2021).
- (2018): Micro-mechanical FE numerical model for masonry curved pillars reinforced with FRP strips subjected to single lap shear tests. In: Composite Structures, v. 201 (Oktober 2018).
- (2014): Mechanical properties and numerical modeling of Fabric Reinforced Cementitious Matrix (FRCM) systems for strengthening of masonry structures. In: Composite Structures, v. 107 (Januar 2014).
- (2010): A numerical insight into the response of masonry reinforced by FRP strips. The case of perfect adhesion. In: Composite Structures, v. 92, n. 10 (September 2010).
- (2020): A Multi-Pier MP method for the non-linear static analysis of out-of-plane loaded masonry walls. In: Engineering Structures, v. 223 (November 2020).
- (2020): Modeling of the Tensile Behavior FRCM Systems for Repair and Strengthening Interventions of Masonry Structures. In: Frontiers in Built Environment, v. 6 (Januar 2020).
- (2020): A Multi-Pier MP procedure for the non-linear analysis of in-plane loaded masonry walls. In: Engineering Structures, v. 212 (Juni 2020).
- (2020): A numerical procedure for the force-displacement description of out-of-plane collapse mechanisms in masonry structures. In: Computers & Structures, v. 233 (Juni 2020).
- (2020): Numerical homogenization‐based seismic assessment of an English‐bond masonry prototype: Structural level application. In: Earthquake Engineering and Structural Dynamics, v. 49, n. 9 (25 Juli 2020).
- (2017): Low Cost Frictional Seismic Base-Isolation of Residential New Masonry Buildings in Developing Countries: A Small Masonry House Case Study. In: The Open Civil Engineering Journal, v. 11, n. 1 (Dezember 2017).
- (2018): The narthex of the Church of the Nativity in Bethlehem: A non-linear finite element approach to predict the structural damage. In: Computers & Structures, v. 207 (September 2018).
- (2014): Numerical modeling of Fabric Reinforce Cementitious Matrix composites (FRCM) in tension. In: Construction and Building Materials, v. 70 (November 2014).
- (2016): Non-linear dynamic and static analyses on eight historical masonry towers in the North-East of Italy. In: Engineering Structures, v. 114 (Mai 2016).
- (2016): Modal pushover and response history analyses of a masonry chimney before and after shortening. In: Engineering Structures, v. 110 (März 2016).
- (2008): Modelling and analysis of FRP-strengthened masonry panels. In: Engineering Structures, v. 30, n. 7 (Juli 2008).
- (2017): Nonlinear Discrete Homogenized Model for Out-of-Plane Loaded Masonry Walls. In: Journal of Structural Engineering (ASCE), v. 143, n. 9 (September 2017).
- (2008): Limit Analysis of Masonry Structures Accounting for Uncertainties in Constituent Materials Mechanical Properties. In: The Open Civil Engineering Journal, v. 2, n. 1 (Dezember 2008).
Structurae kooperiert mit
