0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Jaamala, Lauri / Hietikko-Kaukola, Henna / Mela, Kristo / Tulonen, Juha / Hyvärinen, Anssi (2024): Eurocode-compliant system-level reliability analyses of trussed portal frames under climatic loads. In: Structural Safety, v. 108 (Mai 2024).

    https://doi.org/10.1016/j.strusafe.2024.102451

  2. Alshawwa, Omar / Mela, Kristo / Ahola, Antti / Björk, Timo (2023): Experiments on Welded High Strength Steel S700 K‐joints. In: ce/papers, v. 6, n. 3-4 (September 2023).

    https://doi.org/10.1002/cepa.2267

  3. Jaamala, Lauri / Mela, Kristo (2023): Towards a practicable GMNIA procedure in the footsteps of the Direct Design Method. In: ce/papers, v. 6, n. 3-4 (September 2023).

    https://doi.org/10.1002/cepa.2502

  4. Silwal, Shekhar / Mela, Kristo / Ma, Zhongcheng (2023): Influence of Profiled Faces on the Overall Shear Performance of Strongly Profiled Sandwich Panel with Mineral Wool Core. In: ce/papers, v. 6, n. 3-4 (September 2023).

    https://doi.org/10.1002/cepa.2445

  5. Jaamala, Lauri / Mela, Kristo / Tulonen, Juha / Hyvärinen, Anssi (2023): Eurocode-compliant system safety factor for advanced design of hollow section Warren trusses. In: Engineering Structures, v. 288 (August 2023).

    https://doi.org/10.1016/j.engstruct.2023.116198

  6. Yan, Rui / Xin, Haohui / Mela, Kristo / El Bamby, Hagar / Veljković, Milan (2023): Fracture simulation of welded RHS X-joints using GTN damage model. In: Advances in Structural Engineering, v. 26, n. 12 (Juni 2023).

    https://doi.org/10.1177/13694332221137175

  7. Jaamala, Lauri / Mela, Kristo / Tulonen, Juha / Hyvärinen, Anssi (2022): Effective material model for cold-formed rectangular hollow sections in beam element-based advanced analysis. In: Journal of Constructional Steel Research, v. 198 (November 2022).

    https://doi.org/10.1016/j.jcsr.2022.107569

  8. Yan, Rui / Mela, Kristo / El Bamby, Hagar / Veljković, Milan (2023): Experimental investigation on the tensile behaviour of welded RHS high strength steel X-joints. In: Engineering Structures, v. 276 (Februar 2023).

    https://doi.org/10.1016/j.engstruct.2022.115357

  9. Yan, Rui / Xin, Haohui / Yang, Fei / El Bamby, Hagar / Veljković, Milan / Mela, Kristo (2022): A method for determining the constitutive model of the heat-affected zone using digital image correlation. In: Construction and Building Materials, v. 342 (August 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.127981

  10. Garifullin, Marsel / Pajunen, Sami / Mela, Kristo / Heinisuo, Markku (2017): Initial rotational stiffness of tubular joints with axial force in chord. In: Rakenteiden Mekaniikka = Journal of Structural Mechanics, v. 50, n. 3 (August 2017).

    https://doi.org/10.23998/rm.64857

  11. Tiainen, Teemu / Mela, Kristo (2017): Kaksivaiheinen menettely epälineaarisen diskreetin teräsrakenteiden optimointitehtävän ratkaisemiseksi. In: Rakenteiden Mekaniikka = Journal of Structural Mechanics, v. 50, n. 3 (August 2017).

    https://doi.org/10.23998/rm.64954

  12. Garifullin, Marsel / Pajunen, Sami / Mela, Kristo / Heinisuo, Markku (2018): Finite element model for rectangular hollow section T joints. In: Rakenteiden Mekaniikka = Journal of Structural Mechanics, v. 51, n. 3 (Dezember 2018).

    https://doi.org/10.23998/rm.70439

  13. Nesheim, Sveinung / Mela, Kristo / Malo, Kjell Arne / Labonnote, Nathalie (2022): Optimization framework for cost and carbon emission of timber floor elements. In: Engineering Structures, v. 252 (Februar 2022).

    https://doi.org/10.1016/j.engstruct.2021.113485

  14. Jaamala, Lauri / Mela, Kristo / Laurila, Jussi / Rinne, Milla / Peura, Pasi (2022): Probabilistic modelling of residual stresses in cold-formed rectangular hollow sections. In: Journal of Constructional Steel Research, v. 189 (Februar 2022).

    https://doi.org/10.1016/j.jcsr.2021.107108

  15. Garifullin, Marsel / Shoushtarian Mofrad, Ashkan / Cábová, Kamila / Wald, František / Pasternak, Hartmut / Mela, Kristo (2022): Translational stiffness and resistance of sandwich panel connections at elevated temperature. In: Engineering Structures, v. 252 (Februar 2022).

    https://doi.org/10.1016/j.engstruct.2021.113604

  16. Cábová, Kamila / Garifullin, Marsel / Shoushtarian Mofrad, Ashkan / Wald, František / Mela, Kristo / Ciupack, Yvonne (2021): Shear resistance of sandwich panel connection at elevated temperature. In: Journal of Structural Fire Engineering, v. 13, n. 2 (Dezember 2021).

    https://doi.org/10.1108/jsfe-03-2021-0013

  17. Ma, Zhongcheng / Havula, Jarmo / Mela, Kristo / Kesti, Jyrki (2021): Structural Fire Analysis of One‐storey Steel‐framed Buildings with Steel Claddings. In: ce/papers, v. 4, n. 2-4 (September 2021).

    https://doi.org/10.1002/cepa.1414

  18. Heinisuo, Markku / Mela, Kristo / Pajunen, Sami / Malaska, Mikko (2019): New Steel-timber Composite Beam, Nordic System. In: ce/papers, v. 3, n. 5-6 (Dezember 2019).

    https://doi.org/10.1002/cepa.1194

  19. Mela, Kristo / Hietaharju, Lauri (2019): Cost optimization of end‐plate connections. In: ce/papers, v. 3, n. 3-4 (September 2019).

    https://doi.org/10.1002/cepa.1065

  20. Cábová, Kamila / Lišková, Nikola / Arha, Tesfamariam / Malaska, Mikko / Alanen, Mika / Mela, Kristo / Pajunen, Sami / Wald, František (2019): Temperature distribution of trapezoidal sheeting in fire. In: ce/papers, v. 3, n. 3-4 (September 2019).

    https://doi.org/10.1002/cepa.1118

  21. Malaska, Mikko / Alanen, Mika / Cábová, Kamila / Lišková, Nikola / Mela, Kristo / Pajunen, Sami / Wald, František (2019): Experimental study on temperature distribution of sandwich panel joints in fire. In: ce/papers, v. 3, n. 3-4 (September 2019).

    https://doi.org/10.1002/cepa.1123

  22. Malaska, Mikko / Cashell, Katherine / Alanen, Mika / Mela, Kristo / Afshan, Sheida (2019): Experimental behaviour of stainless steel cellular beam in fire. In: ce/papers, v. 3, n. 3-4 (September 2019).

    https://doi.org/10.1002/cepa.1151

  23. Garifullin, Marsel / Pajunen, Sami / Mela, Kristo / Heinisuo, Markku / Havula, Jarmo (2017): Initial in-plane rotational stiffness of welded RHS T joints with axial force in main member. In: Journal of Constructional Steel Research, v. 139 (Dezember 2017).

    https://doi.org/10.1016/j.jcsr.2017.09.033

  24. Garifullin, Marsel / Bronzova, Maria / Pajunen, Sami / Mela, Kristo / Heinisuo, Markku (2019): Initial axial stiffness of welded RHS T joints. In: Journal of Constructional Steel Research, v. 153 (Februar 2019).

    https://doi.org/10.1016/j.jcsr.2018.10.025

  25. Tiainen, Teemu / Mela, Kristo / Jokinen, Timo / Heinisuo, Markku (2017): The effect of steel grade on weight and cost of Warren-type welded tubular trusses. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 170, n. 11 (November 2017).

    https://doi.org/10.1680/jstbu.16.00112

  26. Mela, Kristo / Heinisuo, Markku (2014): Weight and cost optimization of welded high strength steel beams. In: Engineering Structures, v. 79 (November 2014).

    https://doi.org/10.1016/j.engstruct.2014.08.028

  27. Havula, Jarmo / Garifullin, Marsel / Heinisuo, Markku / Mela, Kristo / Pajunen, Sami (2018): Moment-rotation behavior of welded tubular high strength steel T joint. In: Engineering Structures, v. 172 (Oktober 2018).

    https://doi.org/10.1016/j.engstruct.2018.06.029

  28. Mela, Kristo / Tiainen, Teemu / Heinisuo, Markku (2017): 12.17: Economical design of high strength steel trusses using multi-criteria optimization. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.417

  29. Van Mellaert, Roxane / Mela, Kristo / Tiainen, Teemu / Heinisuo, Markku / Lombaert, Geert / Schevenels, Mattias (2017): 15.13: Discrete sizing optimization of trussed steel portal frames according to Eurocode 3. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.455

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine