Yusuf Mehta 
- (2024): Evaluating the impact of variability in the source of waste polyethylene on the design of plastic modified asphalt mixtures. In: Construction and Building Materials, v. 442 (September 2024).
- (2024): Laboratory cracking and interlayer bond strength performance characterization of full-scale accelerated geosynthetic reinforced asphalt concrete. In: Construction and Building Materials, v. 420 (März 2024).
- (2024): Laboratory performance characterization of polyolefin/ aramid fibers and synthetic aramid fibers reinforced asphalt mixtures. In: Construction and Building Materials, v. 419 (März 2024).
- (2024): Understanding the Storage Stability of Polyethylene Modified Binders: A Laboratory Case Study Using Waste Plastics. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 4 (April 2024).
- (2023): Estimating tensile strength ratio of asphalt mixtures using Surface Free Energy (SFE) and Fourier Transform Infrared Attenuated Total Reflectance (FTIR-ATR). In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2023): Evaluation of the impact of nanomodification on Self-Healing behavior of asphalt binders. In: Construction and Building Materials, v. 405 (November 2023).
- (2023): Compactability and Performance of Warm-Mix Additives at Lower Than Traditional Compaction Temperatures. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (Dezember 2023).
- (2023): Storage Stability and Performance Assessment of Styrene-Butadiene-Styrene: Waste Polyethylene–Modified Binder Using Waste Cooking Oil. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 11 (November 2023).
- (2023): Assessment of the impact of binder grade on the laboratory performance of fiber reinforced asphalt mixtures. In: Construction and Building Materials, v. 401 (Oktober 2023).
- (2022): Laboratory performance of dense graded asphalt mixtures prepared using highly polymer modified binders containing corn oil as softening agent. In: Construction and Building Materials, v. 345 (August 2022).
- (2021): Evaluating the impact of fiber type and dosage rate on laboratory performance of Fiber-Reinforced asphalt mixtures. In: Construction and Building Materials, v. 310 (Dezember 2021).
- (2022): Evaluating the potential of using foamed concrete as the insulation layer for pavements in cold regions. In: Construction and Building Materials, v. 341 (Juli 2022).
- (2022): Performance-based design of asphalt pavements concerning the reliability analysis. In: Construction and Building Materials, v. 332 (Mai 2022).
- (2021): Evaluation of cracking performance of fiber reinforced and polymer enhanced microsurfacing mixtures using conventional asphalt laboratory testing. In: Construction and Building Materials, v. 307 (November 2021).
- (2017): Field cracking performance of airfield rigid pavements. In: Journal of Traffic and Transportation Engineering (English Edition), v. 4, n. 4 (August 2017).
- (2021): Economic and Environmental Cost Analysis of Cold In-Place Recycling. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 3 (März 2021).
- (2020): Evaluating the laboratory cracking performance of pavement preservation materials using the Texas overlay tester. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Impact of Additives on Low-Temperature Cracking Properties of Soft Binders Used in Cold Regions. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 10 (Oktober 2020).
- (2019): Effect of rejuvenator types and mixing procedures on volumetric properties of asphalt mixtures with 50% RAP. In: Construction and Building Materials, v. 218 (September 2019).
- (2011): Load-Transfer Efficiencies of Rigid Airfield Pavement Joints Based on Stresses and Deflections. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 8 (August 2011).
- (2007): Evaluation and Modeling of Repeated Load Test Data of Asphalt Concrete for Mechanistic-Empirical Pavement Design. In: Journal of Materials in Civil Engineering (ASCE), v. 19, n. 11 (November 2007).
- (2011): A study to determine the degree of partial blending of reclaimed asphalt pavement (RAP) binder for high RAP hot mix asphalt. In: Construction and Building Materials, v. 25, n. 1 (Januar 2011).
- (2012): Characterization of creep and recovery curve of polymer modified binder. In: Construction and Building Materials, v. 34 (September 2012).
- (2013): Modeling flexible pavement overlay performance for use with quality-related specifications. In: Construction and Building Materials, v. 48 (November 2013).
- (2014): Correlation between multiple stress creep recovery (MSCR) results and polymer modification of binder. In: Construction and Building Materials, v. 65 (August 2014).
- (2015): Evaluation of fatigue cracking performance of asphalt mixtures under heavy static and dynamic aircraft loads. In: Construction and Building Materials, v. 95 (Oktober 2015).
- (2013): Determining the impact of degree of blending and quality of reclaimed asphalt pavement on predicted pavement performance using pavement ME design. In: Construction and Building Materials, v. 48 (November 2013).
- (2003): Evaluation of FWD Data for Determination of Layer Moduli of Pavements. In: Journal of Materials in Civil Engineering (ASCE), v. 15, n. 1 (Februar 2003).
Structurae kooperiert mit
