Claudio Mazzotti 
- (2023): Experimental characterization of the mechanical behaviour of U-shaped dissipative devices. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2023): Confinement of masonry columns through SRG: experimental results and analytical prediction. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2023): Ground Motion Analysis Toolbox and Seismic Scenarios Toolbox: software tools for seismic damage scenarios assessment in the Emilia-Romagna Region. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2022): Effects of Thermal Variations on the Tensile Behavior of FRCM Strengthening Systems. In: Journal of Composites for Construction, v. 26, n. 5 (Oktober 2022).
- (2022): Effect of temperature variations on the bond behavior of FRCM applied to masonry. In: Materials and Structures, v. 55, n. 6 (26 Juni 2022).
- (2021): FRCM/SRG strengthened masonry in diagonal compression: experimental results and analytical approach proposal. In: Construction and Building Materials, v. 283 (Mai 2021).
- (2022): Critical analysis on the use of the shove test for investigating the shear-sliding behavior of brick masonry. In: Engineering Structures, v. 254 (März 2022).
- (2021): Influence of different set-up parameters on the bond behavior of FRCM composites. In: Construction and Building Materials, v. 308 (November 2021).
- (2021): A design oriented fibre-based model for simulating the long-term behaviour of RC beams: Application to beams cast in different stages. In: Journal of Building Engineering, v. 44 (Dezember 2021).
- (2021): Cyclic response of CLT Post-Tensioned Walls: Experimental and numerical investigation. In: Construction and Building Materials, v. 308 (November 2021).
- (2021): A discrete-cracking numerical model for the in-plane behavior of FRCM strengthened masonry panels. In: Bulletin of Earthquake Engineering, v. 19, n. 11 (Juni 2021).
- (2020): Behavior factor of concrete portal frames with dissipative devices based on carbon-wrapped steel tubes. In: Bulletin of Earthquake Engineering, v. 19, n. 1 (Oktober 2020).
- (2014): Creep tests on GFRP pultruded specimens subjected to traction or shear. In: Composite Structures, v. 108 (Februar 2014).
- (2012): Experimental determination of FRP–concrete cohesive interface properties under fatigue loading. In: Composite Structures, v. 94, n. 4 (März 2012).
- (2020): Inverse Analysis of the Partitioning Deformation Modulusof High-Arch Dams Based on Quantum Genetic Algorithm. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2020): Experimental characterization of monotonic and cyclic behavior of steel-to-CLT nailed joints strengthened with composite plies. In: Construction and Building Materials, v. 256 (September 2020).
- (2021): In-Plane Shear Behavior of Stone Masonry Panels Strengthened through Grout Injection and Fiber Reinforced Cementitious Matrices. In: International Journal of Architectural Heritage, v. 15, n. 10 (Dezember 2021).
- (2003): Nonlinear Creep Damage Model for Concrete under Uniaxial Compression. In: Journal of Engineering Mechanics (ASCE), v. 129, n. 9 (September 2003).
- (2018): FRCM strengthening systems efficiency on the shear behavior of pre-damaged masonry panels: an experimental study. In: Journal of Building Pathology and Rehabilitation, v. 4, n. 1 (Dezember 2018).
- (2013): Influence of surface roughness on the bond of FRP laminates to concrete. In: Construction and Building Materials, v. 40 (März 2013).
- (2014): Evaluation of fibre-reinforced concrete fracture energy through tests on notched round determinate panels with different diameters. In: Construction and Building Materials, v. 52 (Februar 2014).
- (2014): Determination of shear strength of historic masonries by moderately destructive testing of masonry cores. In: Construction and Building Materials, v. 54 (März 2014).
- (2014): Comparison between experimental methods for evaluating the compressive strength of existing masonry buildings. In: Construction and Building Materials, v. 68 (Oktober 2014).
- (2019): Destructive and minor destructive tests on masonry buildings: Experimental results and comparison between shear failure criteria. In: Construction and Building Materials, v. 199 (Februar 2019).
- (2016): Experimental characterization of composite-to-brick masonry shear bond. In: Materials and Structures, v. 49, n. 7 (Juli 2016).
- (2012): An Experimental Campaign on the Long-Term Properties of Self Compacting Concrete. In: Advances in Structural Engineering, v. 15, n. 7 (Juli 2012).
- (2009): Long-term experimental tests on precast beams completed with cast in situ concrete. In: European Journal of Environmental and Civil Engineering, v. 13, n. 6 (Juli 2009).
- (2011): The effect of the number of strengthening layers on the FRP-concrete bond behaviour. In: European Journal of Environmental and Civil Engineering, v. 15, n. 9 (Januar 2011).
- (2018): Experimental and numerical behaviour of dissipative devices based on carbon-wrapped steel tubes for the retrofitting of existing precast RC structures. In: Earthquake Engineering and Structural Dynamics, v. 47, n. 5 (25 April 2018).
- (2018): Effectiveness of FRCM Reinforcement Applied to Masonry Walls Subject to Axial Force and Out-Of-Plane Loads Evaluated by Experimental and Numerical Studies. In: International Journal of Architectural Heritage, v. 12, n. 3 (Juli 2018).
Structurae kooperiert mit
