0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Fatima Majid ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Zekriti, Najat / Majid, Fatima / Taoufik, Hachimi / Tounsi, Yassine / Rhanim, Rajaa / Mrani, Ibrahim / Rhanim, Hassan (2022): Improvement of crack tip position estimation in DIC images by image processing methods. In: Frattura ed Integrità Strutturale, v. 17, n. 63 (21 Dezember 2022).

    https://doi.org/10.3221/igf-esis.63.06

  2. Majid, Fatima / Hachimi, T. / Rhanim, H. / Rhanim, R. (2022): Delamination effect on the mechanical behavior of 3D printed polymers. In: Frattura ed Integrità Strutturale, v. 17, n. 63 (21 Dezember 2022).

    https://doi.org/10.3221/igf-esis.63.03

  3. Zekriti, Najat / Majid, Fatima / Rhanim, Rajae / Mrani, Ibrahim / Rhanim, Hassan (2022): PVC failure modelling through experimental and digital image correlation measurements. In: Frattura ed Integrità Strutturale, v. 16, n. 60 (25 März 2022).

    https://doi.org/10.3221/igf-esis.60.33

  4. Majid, Fatima / Safe, Mohamed / Elghorba, Mohamed (2017): Burst behavior of CPVC compared to HDPE thermoplastic polymer under a controlled internal pressure. In: Procedia Structural Integrity, v. 3 ( 2017).

    https://doi.org/10.1016/j.prostr.2017.04.041

  5. Majid, Fatima / Ouardi, Abderazzak / Barakat, Mohamed / Elghorba, Mohamed (2017): Mechanical behavior prediction of PPR and HDPE polymers through newly developed nonlinear damage-reliability models. In: Procedia Structural Integrity, v. 3 ( 2017).

    https://doi.org/10.1016/j.prostr.2017.04.043

  6. Nattaj, Jilali / Majid, Fatima / Chaffoui, Hassan / El Ghorba, Mohamed (2017): Estimation of the damage in doubly notched A36 steel specimens, as a function of the reduction rate of Nf under a loading level Δ σ. In: Procedia Structural Integrity, v. 3 ( 2017).

    https://doi.org/10.1016/j.prostr.2017.04.018

  7. Majid, Fatima / Ezzahi, Mohammed / Elghorba, Mohamed (2018): Energy damage approaches of artificially notched and aged thermoplastic pipes. In: Procedia Structural Integrity, v. 9 ( 2018).

    https://doi.org/10.1016/j.prostr.2018.06.041

  8. Ezzahi, Mohammed / Khafallah, Mohamed / Majid, Fatima (2018): Structural integrity of a Doubly Fed Induction Generator (DFIG) of a wind power system (WPS). In: Procedia Structural Integrity, v. 9 ( 2018).

    https://doi.org/10.1016/j.prostr.2018.06.042

  9. Jikal, Abdeljalil / Majid, Fatima / Chaffou, Hassan / El Ghorba, Mohamed (2019): Influence of corrosion on the mechanical behavior of strand of a non-rotating wire rope: experimental study. In: Procedia Structural Integrity, v. 18 ( 2019).

    https://doi.org/10.1016/j.prostr.2019.08.221

  10. Majid, Fatima / Rhanim, Rajaa / Lahlou, Mohammed / Rhanim, Hassan / Ezzahi, Mohammed / Elghorba, Mohamed (2020): Maintainability and reliability of high density polyethylene pipes through experimental and theoretical models. In: Procedia Structural Integrity, v. 25 ( 2020).

    https://doi.org/10.1016/j.prostr.2020.04.048

  11. Zekriti, Najat / Rhanim, Rajaa / Majid, Fatima / Lahlou, Mohammed / Ibrahim, Mrani / Rhanim, Hassan (2020): Mode I stress intensity factors of printed and extruded specimens based on Digital Image Correlation method (DIC): case of ABS material. In: Procedia Structural Integrity, v. 28 ( 2020).

    https://doi.org/10.1016/j.prostr.2020.10.149

  12. Majid, Fatima / Zekeriti, Najat / Rhanim, Rajaa / Lahlou, Mohammed / Rhanim, Hassan / Mrani, Brahim (2020): Mechanical behavior and crack propagation of ABS 3D printed specimens. In: Procedia Structural Integrity, v. 28 ( 2020).

    https://doi.org/10.1016/j.prostr.2020.10.147

  13. Naboulsi, Nassima / Hachimi, Taoufik / Majid, Fatima / Rhanim, Rajae / Zekriti, Najat / Rhanim, Hassan (2021): Modeling and control of 3D filament extruder. In: Procedia Structural Integrity, v. 33 ( 2021).

    https://doi.org/10.1016/j.prostr.2021.10.109

  14. Hachimi, Taoufik / Naboulsi, Nassima / Majid, Fatima / Rhanim, Rajae / Mrani, Ibrahim / Rhanim, Hassan (2021): Design and Manufacturing of a 3D printer filaments extruder. In: Procedia Structural Integrity, v. 33 ( 2021).

    https://doi.org/10.1016/j.prostr.2021.10.101

  15. Ouardi, Abderazzak / Majid, Fatima / Mouhib, Nadia / Elghorba, Mohamed (2017): Residual life prediction of defected Polypropylene Random copolymer pipes (PPR). In: Frattura ed Integrità Strutturale, v. 12, n. 43 (Dezember 2017).

    https://doi.org/10.3221/igf-esis.43.07

  16. Majid, Fatima / Elghorba, Mohamed (2017): Continuum damage modeling through theoretical and experimental pressure limit formulas. In: Frattura ed Integrità Strutturale, v. 12, n. 43 (Dezember 2017).

    https://doi.org/10.3221/igf-esis.43.05

  17. Majid, Fatima / Nattaj, Jilali / Elghorba, Mohamed (2016): Pressure vessels design methods using the codes, fracture mechanics and multiaxial fatigue. In: Frattura ed Integrità Strutturale, v. 10, n. 38 (Oktober 2016).

    https://doi.org/10.3221/igf-esis.38.37

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine