0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Murty K. S. Madugula

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Ding, Yongcong / Madugula, Murty K. S. (2004): Elastic and Plastic Section Moduli of Steel Angles About Principal Axes. In: Engineering Journal, v. 41, n. 1 (März 2004).

    https://doi.org/10.62913/engj.v41i1.823

  2. Madugula, Murty K. S. / Kojima, Toshifumi / Kajita, Yasuyuki / Ohama, Michihiro (1994): Geometrical and Mechanical Properties of Large Rolled Steel Angles. In: Engineering Journal, v. 31, n. 4 (Dezember 1994).

    https://doi.org/10.62913/engj.v31i4.633

  3. Adluri, Seshu Madhava Rao / Madugula, Murty K. S. (1994): Geometric Properties of Hot-Rolled Steel Angles Including the Effects of Toe Radii and Fillet. In: Engineering Journal, v. 31, n. 2 (Juni 1994).

    https://doi.org/10.62913/engj.v31i2.623

  4. Adluri, Seshu Madhava Rao / Madugula, Murty K. S. (1992): Eccentrically Loaded Steel Single Angle Struts. In: Engineering Journal, v. 29, n. 2 (Juni 1992).

    https://doi.org/10.62913/engj.v29i2.589

  5. Adluri, Seshu Madhava Rao / Madugula, Murty K. S. (1991): Design Strength of Schifflerized Angle Struts. In: Engineering Journal, v. 28, n. 2 (Juni 1991).

    https://doi.org/10.62913/engj.v28i2.571

  6. Kennedy, John B. / Madugula, Murty K. S. (1982): Buckling of Angles: State of the Art. In: Journal of the Structural Division (ASCE), v. 108, n. 9 (September 1982).

    https://doi.org/10.1061/jsdeag.0006036

  7. Bhowmick, Anjan Kanti / Kumalasari, Cindy / Varkekar, Anant / Madugula, Murty K. S. (2005): Experimental determination of axial compressive strength of crimped cold-formed channels. In: Thin-Walled Structures, v. 43, n. 4 (April 2005).

    https://doi.org/10.1016/j.tws.2004.10.004

  8. Ray, Sujit K. / Madugula, Murty K. S. (1989): Computer program for the design of laterally unsupported angle beams. In: Journal of Constructional Steel Research, v. 12, n. 1 (Januar 1989).

    https://doi.org/10.1016/0143-974x(89)90049-7

  9. Adluri, Seshu Madhava Rao / Madugula, Murty K. S. (1991): Geometric properties of schifflerized angles. In: Journal of Constructional Steel Research, v. 18, n. 1 (Januar 1991).

    https://doi.org/10.1016/0143-974x(91)90054-5

  10. Madugula, Murty K. S. / Kojima, Toshifumi / Kajita, Yasuyuki / Ohama, Michihiro (1996): Geometric axis bending strength of double angle beams. In: Journal of Constructional Steel Research, v. 38, n. 1 (Mai 1996).

    https://doi.org/10.1016/0143-974x(96)00012-0

  11. Ekhande, Shantaram G. / Madugula, Murty K. S. (1988): Geometric non-linear analysis of three-dimensional guyed towers. In: Computers & Structures, v. 29, n. 5 (Januar 1988).

    https://doi.org/10.1016/0045-7949(88)90348-3

  12. Kim, Yail J. / Madugula, Murty K. S. (2010): Behavior of bolted circular flange connections subject to tensile loading. In: International Journal of Steel Structures, v. 10, n. 1 ( 2010).

    https://doi.org/10.1007/bf03249512

  13. Madugula, Murty K. S. / Wahba, Yohanna M. F. / Monforton, Gerard R. (1998): Dynamic response of guyed masts. In: Engineering Structures, v. 20, n. 12 (Dezember 1998).

    https://doi.org/10.1016/s0141-0296(97)00206-x

  14. Madugula, Murty K. S. / Mohan, S. (1988): Angles in Eccentric Tension. In: Journal of Structural Engineering (ASCE), v. 114, n. 10 (Oktober 1988).

    https://doi.org/10.1061/(asce)0733-9445(1988)114:10(2387)

  15. Madugula, Murty K. S. / Ray, Sujit K. (1984): Cross-sectional properties of cold-formed angles. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 11, n. 3 (September 1984).

    https://doi.org/10.1139/l84-081

  16. Madugula, Murty K. S. / Ray, Sujit K. (1984): Biaxial bending of cold-formed angle members. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 11, n. 4 (Dezember 1984).

    https://doi.org/10.1139/l84-108

  17. Abdel-Sayed, G. / Temple, M. C. / Madugula, Murty K. S. (1974): Response of Composite Slabs to Dynamic Loads. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 1, n. 1 (September 1974).

    https://doi.org/10.1139/l74-005

  18. Kennedy, John B. / Madugula, Murty K. S. / Keen, Robert G. / Fung, C. (1978): Cold-formed steel in composite bridge construction. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 5, n. 2 (Juni 1978).

    https://doi.org/10.1139/l78-021

  19. Adluri, Seshu Madhava Rao / Madugula, Murty K. S. (1991): Factored axial compressive resistance of schifflerized angles. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 18, n. 6 (Dezember 1991).

    https://doi.org/10.1139/l91-114

  20. Wahba, Yohanna M. F. / Madugula, Murty K. S. / Monforton, Gerard R. (1993): Combined wind and ice loading on antenna towers. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 20, n. 6 (Dezember 1993).

    https://doi.org/10.1139/l93-135

  21. Madugula, Murty K. S. / Adluri, Seshu Madhava Rao (1995): Design of 60° equal-leg steel angles according to CSA Standard S37-94. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 22, n. 3 (Juni 1995).

    https://doi.org/10.1139/l95-068

  22. Ding, Yongcong / Jaboo, Kalid S. / Sun, Yean / Madugula, Murty K. S. (2002): Experimental basis for the effective length factors of steel solid round cross-braced diagonals in CSA Standard S37-01. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 29, n. 3 (Juni 2002).

    https://doi.org/10.1139/l02-024

  23. Wahba, Yohanna M. F. / Madugula, Murty K. S. / Monforton, Gerard R. (1994): Limit states design of antenna towers. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 21, n. 6 (Dezember 1994).

    https://doi.org/10.1139/l94-097

  24. Wahba, Yohanna M. F. / Madugula, Murty K. S. / Monforton, Gerard R. (1996): Effect of guy initial tension on design of guyed antenna towers. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 23, n. 2 (April 1996).

    https://doi.org/10.1139/l96-049

  25. Ding, Yongcong / Ghrib, Faouzi / Bhattacharjee, Sudip / Madugula, Murty K. S. (2003): A novel method for determining effective length factors for solid round steel leg members of guyed lattice towers with cross-bracing. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 30, n. 4 (August 2003).

    https://doi.org/10.1139/l03-027

  26. Aziz, Mohamad Abdel / Abdel-Sayed, George / Ghrib, Faouzi / Grace, Nabil F. / Madugula, Murty K. S. (2005): Analysis of concrete beams prestressed and post-tensioned with externally unbonded carbon fiber reinforced polymer tendons. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 32, n. 6 (Dezember 2005).

    https://doi.org/10.1139/l05-071

  27. Kumalasari, Cindy / Ding, Yongcong / Madugula, Murty K. S. / Ghrib, Faouzi (2006): Compressive strength of solid round steel members strengthened with rods or angles. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 33, n. 4 (April 2006).

    https://doi.org/10.1139/l05-062

  28. Kumalasari, Cindy / Ding, Yongcong / Madugula, Murty K. S. (2006): Prying action in bolted steel circular flange connections. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 33, n. 4 (April 2006).

    https://doi.org/10.1139/l05-060

  29. Adluri, Seshu Madhava Rao / Madugula, Murty K. S. (1996): Flexural Buckling of Steel Angles: Experimental Investigation. In: Journal of Structural Engineering (ASCE), v. 122, n. 3 (März 1996).

    https://doi.org/10.1061/(asce)0733-9445(1996)122:3(309)

  30. Adluri, Seshu Madhava Rao / Madugula, Murty K. S. (1996): Development of Column Curve for Steel Angles. In: Journal of Structural Engineering (ASCE), v. 122, n. 3 (März 1996).

    https://doi.org/10.1061/(asce)0733-9445(1996)122:3(318)

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine