0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Mahendrakumar Madhavan ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Mallepogu, Nagaraju / Madhavan, Mahendrakumar (2024): Ultimate Shear Capacity of the Cold-Formed Steel Torsionally Restrained Beam-to-Column Moment Connection with a Three-Bolted Clip Angle and Flange Cleat. In: Journal of Structural Engineering (ASCE), v. 150, n. 6 (Juni 2024).

    https://doi.org/10.1061/jsendh.steng-12724

  2. Bondapalli, Surya Chandan / natesan, vijayakumar / Madhavan, Mahendrakumar (2024): Numerical investigation of cold formed steel sleeve connection for channel sections subjected to combined bending and shear. In: Journal of Constructional Steel Research, v. 217 (Juni 2024).

    https://doi.org/10.1016/j.jcsr.2024.108588

  3. Naik, Bishal / Madhavan, Mahendrakumar (2023): Structural behaviour of Cold‐Formed Steel back‐to‐back welded sections subjected to longitudinal shear. In: ce/papers, v. 6, n. 3-4 (September 2023).

    https://doi.org/10.1002/cepa.2761

  4. Chobe, Gaurav / Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2023): Numerical Study on Retrofitting of Hot Rolled Steel Beams with Cold-formed Steel Encased Channels-Design Concept using Machine Learning Method. In: Engineering Structures, v. 297 (Dezember 2023).

    https://doi.org/10.1016/j.engstruct.2023.116972

  5. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2023): Proposal to Improve AISI S100 DSM Design Standards for Cold-Formed Steel Built-Up Closed Cross-Section Columns Subjected to Local–Global Interaction Buckling. In: Journal of Structural Engineering (ASCE), v. 149, n. 10 (Oktober 2023).

    https://doi.org/10.1061/jsendh.steng-11916

  6. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2023): Structural Behaviour of Cold-Formed Steel Built-Up Closed Cross-section Columns - Assessing the Influence of Parameters and Design Methods. In: Engineering Structures, v. 294 (November 2023).

    https://doi.org/10.1016/j.engstruct.2023.116600

  7. Madhavan, Mahendrakumar (2023): Obituary note for Prof. N E Shanmugam. In: Journal of Constructional Steel Research, v. 208 (September 2023).

    https://doi.org/10.1016/j.jcsr.2023.107877

  8. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2023): Splice Connections for Built-Up Column Assemblies in Cold-Formed Steel Construction. In: Journal of Structural Engineering (ASCE), v. 149, n. 3 (März 2023).

    https://doi.org/10.1061/jsendh.steng-11540

  9. Mallepogu, Nagaraju / Madhavan, Mahendrakumar (2023): Improved Design Shear Method for the Bolted Cold-Formed Steel Clip-Angle Connector. In: Journal of Structural Engineering (ASCE), v. 149, n. 5 (Mai 2023).

    https://doi.org/10.1061/jsendh.steng-11666

  10. Madhavan, Mahendrakumar (2023): Obituary. In: Structures, v. 50 (April 2023).

    https://doi.org/10.1016/j.istruc.2022.12.047

  11. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar / Lau, Hieng Ho (2021): Sheathing-fastener connection strength based design method for sheathed CFS point-symmetric wall frame studs. In: Structures, v. 33 (Oktober 2021).

    https://doi.org/10.1016/j.istruc.2021.04.052

  12. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2020): Influence of Sheathing-Fastener Connection Stiffness on the Design Strength of Cold-Formed Steel Wall Panels. In: Journal of Structural Engineering (ASCE), v. 146, n. 10 (Oktober 2020).

    https://doi.org/10.1061/(asce)st.1943-541x.0002709

  13. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2020): Recommendations for design of sheathing bracing systems for slender cold-formed steel structural members. In: Journal of Constructional Steel Research, v. 170 (Juli 2020).

    https://doi.org/10.1016/j.jcsr.2020.106116

  14. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2020): Structural behaviour and design of plywood sheathed cold-formed steel wall systems subjected to out of plane loading. In: Journal of Constructional Steel Research, v. 166 (März 2020).

    https://doi.org/10.1016/j.jcsr.2019.105888

  15. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2017): Strengthening of unsymmetrical open channel built-up beams using CFRP. In: Thin-Walled Structures, v. 119 (Oktober 2017).

    https://doi.org/10.1016/j.tws.2017.07.018

  16. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2019): Flexural Behaviour and Design of Cold-Formed Steel Wall Panels Sheathed with Particle Cement Board. In: Journal of Constructional Steel Research, v. 162 (November 2019).

    https://doi.org/10.1016/j.jcsr.2019.105723

  17. natesan, vijayakumar / Madhavan, Mahendrakumar (2019): Performance of CFS Beam-to-Beam Bolted Connection Using Clip Angle and Flange Strip: Experimental Investigation. In: Journal of Structural Engineering (ASCE), v. 145, n. 10 (Oktober 2019).

    https://doi.org/10.1061/(asce)st.1943-541x.0002390

  18. Govindan, Senthil kumar / Madhavan, Mahendrakumar (2019): Study on cold-formed and hot rolled steel composite panel system. In: Structures, v. 20 (August 2019).

    https://doi.org/10.1016/j.istruc.2019.06.013

  19. natesan, vijayakumar / Madhavan, Mahendrakumar (2019): Structural performance on bolted sleeved connections between two CFS channel sections subjected to combined bending and shear. In: Structures, v. 20 (August 2019).

    https://doi.org/10.1016/j.istruc.2019.06.026

  20. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2019): Structural design of cold-formed steel face-to-face connected built-up beams using direct strength method. In: Journal of Constructional Steel Research, v. 160 (September 2019).

    https://doi.org/10.1016/j.jcsr.2019.05.053

  21. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2019): Sheathing braced design of cold-formed steel structural members subjected to torsional buckling. In: Structures, v. 20 (August 2019).

    https://doi.org/10.1016/j.istruc.2019.04.015

  22. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2019): Investigation on sheathing-fastener connection failures in cold-formed steel wall panels. In: Structures, v. 20 (August 2019).

    https://doi.org/10.1016/j.istruc.2019.03.007

  23. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2019): Strengthening of Laterally Restrained Steel Beams Subjected to Flexural Loading Using Low-Modulus CFRP. In: Journal of Performance of Constructed Facilities (ASCE), v. 33, n. 3 (Juni 2019).

    https://doi.org/10.1061/(asce)cf.1943-5509.0001293

  24. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2019): Sheathing Bracing Requirements for Cold-formed Steel Wall Panels: Experimental Investigation. In: Structures, v. 19 (Juni 2019).

    https://doi.org/10.1016/j.istruc.2019.01.005

  25. Madhavan, Mahendrakumar / Sanap, Vishwanath / Verma, Riteshkumar / Selvaraj, Sivaganesh (2016): Flexural Strengthening of Structural Steel Angle Sections Using CFRP: Experimental Investigation. In: Journal of Composites for Construction, v. 20, n. 1 (Februar 2016).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000578

  26. Madhavan, Mahendrakumar / Davidson, James S. (2009): Theoretical Evaluation of Flange Local Buckling for Horizontally Curved I-Girders. In: Journal of Bridge Engineering (ASCE), v. 14, n. 6 (November 2009).

    https://doi.org/10.1061/(asce)1084-0702(2009)14:6(424)

  27. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2018): Retrofitting of Structural Steel Channel Sections Using Cold-Formed Steel Encasing Channels. In: Journal of Performance of Constructed Facilities (ASCE), v. 32, n. 4 (August 2018).

    https://doi.org/10.1061/(asce)cf.1943-5509.0001187

  28. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2018): Geometric Imperfection Measurements and Validations on Cold-Formed Steel Channels Using 3D Noncontact Laser Scanner. In: Journal of Structural Engineering (ASCE), v. 144, n. 3 (März 2018).

    https://doi.org/10.1061/(asce)st.1943-541x.0001993

  29. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2019): Improvements in AISI Design Methods for Gypsum-Sheathed Cold-Formed Steel Wall Panels Subjected to Bending. In: Journal of Structural Engineering (ASCE), v. 145, n. 2 (Februar 2019).

    https://doi.org/10.1061/(asce)st.1943-541x.0002223

  30. Selvaraj, Sivaganesh / Madhavan, Mahendrakumar (2018): Studies on Cold-Formed Steel Stud Panels with Gypsum Sheathing Subjected to Out-of-Plane Bending. In: Journal of Structural Engineering (ASCE), v. 144, n. 9 (September 2018).

    https://doi.org/10.1061/(asce)st.1943-541x.0002069

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine