Xiang Ma 
- (2024): Analysis of asphalt microscopic and force curves under water-temperature coupling with AFM. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): Seismic performance of very short links in eccentrically braced substructures. In: Journal of Constructional Steel Research, v. 216 (Mai 2024).
- (2024): Chiller fault diagnosis based on improved variational autoencoder and co-training framework: A case study of insufficient samples. In: Journal of Building Engineering, v. 88 (Juli 2024).
- (2023): Seismic performance of eccentrically braced precast reinforced concrete columns-steel beams frame with replaceable shear links based on plastic design. In: Journal of Building Engineering, v. 76 (Oktober 2023).
- (2023): Optimization of mortar self-healing performance-based on response surface methodology: A multifactor analysis of zeolites, crystalline admixtures, and water-to-binder ratio. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2023): Study on the Synergistic Effect of Superabsorbent Polymer and Crystalline Admixture on Self-Healing Performance of Mortar Based on Image Binarization Method. In: Buildings, v. 13, n. 12 (22 November 2023).
- (2023): Internal structure changes within porous asphalt mixture with different saturation under vertical repeated load. In: Construction and Building Materials, v. 372 (April 2023).
- (2022): Evaluating the thermal aging-induced raveling potential of thin friction course (TFC). In: Construction and Building Materials, v. 321 (Februar 2022).
- (2022): Cyclic behavior of steel-precast concrete hybrid frames with high stiffness steel connections. In: Engineering Structures, v. 257 (April 2022).
- (2022): Rheology, Chemical Composition, and Microstructure of the Asphalt Binder in Fine Aggregate Matrix after Different Long-Term Laboratory Aging Procedures. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 4 (April 2022).
- (2022): Internal structure change of porous asphalt concrete under coupled conditions of load, moisture and temperature. In: Construction and Building Materials, v. 314 (Januar 2022).
- (2009): Analysis on Stress of Pavement with Different Crack Statuses in Base. In: Journal of Highway and Transportation Research and Development (English Edition), v. 4, n. 1 (Juni 2009).
- (2010): Evaluation of Low-temperature Performance of Porous Asphalt Mixture. In: Journal of Highway and Transportation Research and Development (English Edition), v. 4, n. 2 (Juli 2010).
- (2020): Investigation of the raveling potential of thin friction course (TFC) under freeze–thaw conditions. In: Materials and Structures, v. 54, n. 1 (16 Dezember 2020).
- (2021): 3D-Reconstruction and characterization of the pore microstructure within the asphalt FAM using the X-ray micro-computed tomography. In: Construction and Building Materials, v. 272 (Februar 2021).
- (2021): Characterization of the interconnected pore and its relationship to the directional permeability of porous asphalt mixture. In: Construction and Building Materials, v. 269 (Februar 2021).
- (2021): Crack Resistance Evaluation for In-Service Asphalt Pavements by Using SCB Tests of Layer-Core Samples. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 1 (Januar 2021).
- (2020): High-temperature failure of porous asphalt mixture under wheel loading based on 2D air void structure analysis. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): Factors affecting the rutting resistance of asphalt pavement based on the field cores using multi-sequenced repeated loading test. In: Construction and Building Materials, v. 253 (August 2020).
- (2019): Experimental Study on Flexural Behaviour of Lightweight Multi-Ribbed Composite Slabs. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Comparison of the Hamburg, indirect tensile, and multi-sequenced repeated load tests for evaluation of HMA rutting resistance. In: Construction and Building Materials, v. 216 (August 2019).
- (2019): Capacity Design Procedure for Rocking Braced Frames Using Modified Modal Superposition Method. In: Journal of Structural Engineering (ASCE), v. 145, n. 6 (Juni 2019).
- (2019): Investigation of the internal structure change of two-layer asphalt mixtures during the wheel tracking test based on 2D image analysis. In: Construction and Building Materials, v. 209 (Juni 2019).
- (2018): Unified Construction of Dynamic Rheological Master Curve of Asphalts and Asphalt Mixtures. In: International Journal of Civil Engineering, v. 16, n. 9 (Juli 2018).
- (2015): Cause analysis on permanent deformation for asphalt pavements using field cores. In: Construction and Building Materials, v. 100 (Dezember 2015).
- (2014): Design Concepts for Controlled Rocking of Self-Centering Steel-Braced Frames. In: Journal of Structural Engineering (ASCE), v. 140, n. 11 (November 2014).
- (2014): Quasi-Static Cyclic Behavior of Controlled Rocking Steel Frames. In: Journal of Structural Engineering (ASCE), v. 140, n. 11 (November 2014).
- (2018): Linear viscoelastic properties of warm-mix recycled asphalt binder, mastic, and fine aggregate matrix under different aging levels. In: Construction and Building Materials, v. 192 (Dezember 2018).
- (2011): Earthquake resilient steel braced frames with controlled rocking and energy dissipating fuses. In: Steel Construction, v. 4, n. 3 (August 2011).
- (2008): Controlled Rocking of Steel Frames as a Sustainable New Technology for Seismic Resistance in Buildings. Vorgetragen bei: 17th IABSE Congress: Creating and Renewing Urban Structures – Tall Buildings, Bridges and Infrastructure, Chicago, USA, 17-19 September 2008.
Structurae kooperiert mit
