Lei Ma 
- (2023): Ripple Voltage Suppression of Dual Active Bridge Converter in Electric Locomotive Using H∞ Loop Shaping Control Method. In: Journal of Physics: Conference Series, v. 2492, n. 1 (1 Mai 2023).
- (2024): Effect of steel fiber shape and content on printability, microstructure and mechanical properties of 3D printable high strength cementitious materials. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): Printability and mechanical properties of 3D printing ultra-high performance concrete incorporating limestone powder. In: Construction and Building Materials, v. 426 (Mai 2024).
- (2024): Early-age inhomogeneous deformation of 3D printed concrete: Characteristics and influences of superplasticizer and water-binder ratio. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2023): Effect of grouped L-shape rebar connectors on the shrinkage behavior of UHPC overlay cast on hardened NSC substrate. In: Construction and Building Materials, v. 382 (Juni 2023).
- (2023): Materials, Structure, and construction of a low-shrinkage UHPC overlay on concrete bridge deck. In: Construction and Building Materials, v. 406 (November 2023).
- (2023): Seismic performance and shear capacity of modular steel structures infilled with cold-formed steel walls using a novel connection system. In: Engineering Structures, v. 289 (August 2023).
- (2023): Investigating urban heat-related health risks based on local climate zones: A case study of Changzhou in China. In: Sustainable Cities and Society, v. 91 (April 2023).
- (2022): 3D printing lightweight aggregate concrete prepared with shell-packing-aggregate method - Printability, mechanical properties and pore structure. In: Journal of Building Engineering, v. 62 (Dezember 2022).
- (2022): Towards Liveable Urban Densities Using a GIS-Based Assessment Methodology. In: Built Environment, v. 48, n. 3 (1 Oktober 2022).
- (2022): Study of the influence of sand on rheological properties, bubble features and buildability of fresh foamed concrete for 3D printing. In: Construction and Building Materials, v. 356 (November 2022).
- (2022): Pore structure, internal relative humidity, and fiber orientation of 3D printed concrete with polypropylene fiber and their relation with shrinkage. In: Journal of Building Engineering, v. 61 (Dezember 2022).
- (2022): Dynamic strain field for granite specimen under SHPB impact tests based on stress wave propagation. In: Underground Space, v. 7, n. 5 (Oktober 2022).
- (2022): Optimization of 3D printing concrete with coarse aggregate via proper mix design and printing process. In: Journal of Building Engineering, v. 56 (September 2022).
- (2022): Mechanical anisotropy evolution of 3D-printed alkali-activated materials with different GGBFS/FA combinations. In: Journal of Building Engineering, v. 50 (Juni 2022).
- (2022): Effect of drying environment on mechanical properties, internal RH and pore structure of 3D printed concrete. In: Construction and Building Materials, v. 315 (Januar 2022).
- (2021): A quantitative analysis of the impact of residential cluster layout on building heating energy consumption in cold IIB regions of China. In: Energy and Buildings, v. 253 (Dezember 2021).
- (2021): Local climate zones mapping using object-based image analysis and validation of its effectiveness through urban surface temperature analysis in China. In: Building and Environment, v. 206 (Dezember 2021).
- (2021): An Experimental Study on Seepage within Shale Fractures due to Confining Pressure and Temperature. In: KSCE Journal of Civil Engineering, v. 25, n. 9 (Juni 2021).
- (2021): Real‐time hybrid simulation of a space substructure based on high‐strength steel composite Y‐eccentrically braced frames. In: Structural Control and Health Monitoring, v. 28, n. 8 (4 Juli 2021).
- (2022): Influence of particle size scale on mechanical properties of tailings under high pressure. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 175, n. 2 (April 2022).
- (2010): Means of Setting Region of Interesting in Identifying Bend Lane. In: Journal of Highway and Transportation Research and Development (English Edition), v. 4, n. 2 (Juli 2010).
- (2014): Study of the Calculation Method of Lateral Load Distribution on a Continuous Composite Box Girder Bridge with Corrugated Steel Webs. In: Journal of Highway and Transportation Research and Development (English Edition), v. 8, n. 2 (Juni 2014).
- (2021): Two-Dimensional SPH Analysis of Seepage with Water Injection Process for Different Crack Morphologies. In: KSCE Journal of Civil Engineering, v. 25, n. 5 (12 März 2021).
- (2021): Real-time hybrid simulation on high strength steel frame with Y-shaped eccentric braces. In: Engineering Structures, v. 226 (Januar 2021).
- (2020): Performance of soils enhanced with eco-friendly biopolymers in unconfined compression strength tests and fatigue loading tests. In: Construction and Building Materials, v. 263 (Dezember 2020).
- (2020): Soft real-time hybrid simulation based on a space steel frame. In: Bulletin of Earthquake Engineering, v. 18, n. 6 (Februar 2020).
- (2010): Application of fuzzy analytic hierarchy process model on determination of optimized pile-type. In: Frontiers of Architecture and Civil Engineering in China, v. 4, n. 2 (Mai 2010).
Structurae kooperiert mit
