Yao Lu 
- (2024): Influences of water filling timing on the deformation mechanism of crushed gangue in goaf. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): Steel corrosion induced shear performance deterioration of RC beams: Experimental investigation and numerical simulation. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): Enhancing the shear ductility in RC beams: A novel fiber reinforced polymer-rubber support composite (FRP-RSC) strengthening approach. In: Structures, v. 64 (Juni 2024).
- (2024): Insights into enhanced shear ductility and toughness of RC beam with fiber reinforced polymer-rubber support composite (FRP-RSC) strengthening system. In: Engineering Structures, v. 314 (September 2024).
- (2024): Advancing energy solutions: Carbon-based cementitious composites in energy storage and harvesting. In: Journal of Building Engineering, v. 91 (August 2024).
- (2024): Comparative analysis of shear behavior and mechanism of concrete beams with strip-shaped CFRP or conventional steel stirrups. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): Axial compressive behavior and failure mechanism of CFRP partially confined ultra-high performance concrete (UHPC). In: Construction and Building Materials, v. 426 (Mai 2024).
- (2024): Pull-out behavior of the pre-installed lifting anchor with supplementary reinforcement for the precast concrete segments of wind turbine hybrid towers. In: Engineering Structures, v. 303 (März 2024).
- (2023): A human-machine collaboration frame in daylighting optimization of semi-outdoor space design by using phased synergistic method: A case study. In: Journal of Building Engineering, v. 79 (November 2023).
- (2024): Failure law of floor during strip mining backfill with paste-tailings over confined aquifer: A case study in China mine. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): Soil Conditioning for EPB Shield Tunneling in Coastal Silty Clay Strata: Laboratory Research and Field Application. In: International Journal of Geomechanics, v. 24, n. 2 (Februar 2024).
- (2023): A novel double bridging-slipping (DBS) concept to overcome deformation incompatibility of textile reinforced-engineering cementitious composite (TR-ECC). In: Case Studies in Construction Materials, v. 19 (Dezember 2023).
- (2023): Excavation-Induced Groundwater Evolution of Noncircular Tunnels in Mountainous Regions: Analytical and Numerical Investigation. In: International Journal of Geomechanics, v. 23, n. 12 (Dezember 2023).
- (2023): A flame-retardant corn straw brick (FRCSB): Thermal stability, flammability and flame-retardant mechanism. In: Construction and Building Materials, v. 401 (Oktober 2023).
- (2023): Comparative study of compressive behavior of confined NSC and UHPC/UHPFRC cylinders externally wrapped with CFRP jacket. In: Engineering Structures, v. 292 (Oktober 2023).
- (2023): Analysis of face stability at the launch stage of shield or TBM tunnelling using a concrete box in complex urban environments. In: Tunnelling and Underground Space Technology, v. 135 (Mai 2023).
- (2023): Preparation of nano-carbon black and silica fume modified foam concrete: Compressive strength, pore structure and electromagnetic property. In: Construction and Building Materials, v. 369 (März 2023).
- (2022): Funicular glass bridge prototype: design optimization, fabrication, and assembly challenges. In: Glass Structures & Engineering, v. 7, n. 2 (August 2022).
- (2019): Ground Disturbance of Different Building Locations in Old Goaf Area: a Case Study in China. In: Geotechnical and Geological Engineering, v. 37, n. 5 (7 Mai 2019).
- (2020): Biodiesel Spray Characteristics and a CFD Simulation Study of Injection Timing Effects on the Combustion Process in a Biodiesel-Fueled, Direct-Injection Rotary Engine. In: Journal of Energy Engineering, v. 146, n. 5 (Oktober 2020).
- (2015): Optimization of facade design based on the impact of interior obstructions to daylighting. In: Building Simulation, v. 9, n. 1 (November 2015).
- (2020): A new approach of CMT seam welding deformation forecasting based on GA-BPNN. In: Frattura ed Integrità Strutturale, v. 14, n. 53 (Juni 2020).
- (2019): Study on Filling Material Ratio and Filling Effect: Taking Coarse Fly Ash and Coal Gangue as the Main Filling Component. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Dynamic and static testing methods for shear modulus of oriented strand board. In: Construction and Building Materials, v. 216 (August 2019).
Structurae kooperiert mit
