Dirk Lowke 
- (2024): Injection 3D Concrete Printing: From Structural Geometry to Fabrication. In: Architectural Design, v. 94, n. 5 (September 2024).
- (2024): The effect of external load on the chloride migration resistance and the service life of reinforced concrete structures and repair mortars. In: Construction and Building Materials, v. 443 (September 2024).
- (2024): Experimental investigations on the compaction energy for a robotic rammed earth process. In: Frontiers in Built Environment, v. 10 (Februar 2024).
- (2024): Experimental study and numerical simulation of adhesively bonded timber-concrete composite panels: bending behavior, adhesive shear and peel stress distributions. In: Engineering Structures, v. 307 (Mai 2024).
- (2023): Robotic knitcrete: computational design and fabrication of a pedestrian bridge using robotic shotcrete on a 3D-Knitted formwork. In: Frontiers in Built Environment, v. 9 (Februar 2023).
- (2023): Shotcrete 3D Printing ‐ Effect of material‐process interaction on the global and local material density. In: ce/papers, v. 6, n. 6 (Dezember 2023).
- (2023): Rheology of low‐clinker suspensions: Multiscale comparison of the effect of PCE on thixotropy. In: ce/papers, v. 6, n. 6 (Dezember 2023).
- (2023): Reduction of the cement content in Selective Cement Activation. In: ce/papers, v. 6, n. 6 (Dezember 2023).
- (2023): Effect of Grain Size and Layer Thickness on Hardened State Properties in Selective Cement Activation. In: ce/papers, v. 6, n. 6 (Dezember 2023).
- (2023): Modelling the effect of mortar constituents on rheological properties. In: ce/papers, v. 6, n. 6 (Dezember 2023).
- (2023): Shotcrete 3D Printing ‐ Interaction of nozzle geometry, homogeneity and hardened concrete properties. In: ce/papers, v. 6, n. 6 (Dezember 2023).
- (2023): The effects of nozzle diameter and length on the resulting strand properties for shotcrete 3D printing. In: Materials and Structures, v. 56, n. 8 (9 September 2023).
- (2023): Automated force-flow-oriented reinforcement integration for Shotcrete 3D Printing. In: Automation in Construction, v. 155 (November 2023).
- (2023): Bending behavior and bond analysis on adhesively bonded glulam-concrete panels fabricated with wet bonding technique. In: Journal of Building Engineering, v. 76 (Oktober 2023).
- (2018): Thixotropy of SCC—A model describing the effect of particle packing and superplasticizer adsorption on thixotropic structural build-up of the mortar phase based on interparticle interactions. In: Cement and Concrete Research, v. 104 (Februar 2018).
- (2020): Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP). In: Cement and Concrete Research, v. 134 (August 2020).
- (2018): Particle-bed 3D printing in concrete construction – Possibilities and challenges. In: Cement and Concrete Research, v. 112 (Oktober 2018).
- (2023): Modelling the influence of material and process parameters on Shotcrete 3D Printed strands - cross-section adjustment for automatic robotic manufacturing. In: Automation in Construction, v. 145 (Januar 2023).
- (2022): Die Forschungsinfrastruktur des SFB TRR 277 AMC Additive Fertigung im Bauwesen. In: Bautechnik, v. 99, n. 10 (Oktober 2022).
- (2022): Additive Manufacturing using mobile robots: Opportunities and challenges for building construction. In: Cement and Concrete Research, v. 158 (August 2022).
- (2022): Importance of Concrete Mesoscale Structure on Bond-Slip Behavior of Externally Bonded CFRP Strips. In: Journal of Composites for Construction, v. 26, n. 5 (Oktober 2022).
- (2021): Digitaler Betonbau durch additive Verfahren – Sachstand und Forschungsbedarf. In: Beton- und Stahlbetonbau, v. 116, n. 11 (September 2021).
- (2021): TRR 277: Additive Fertigung im Bauwesen. In: Bautechnik, v. 98, n. 3 (März 2021).
- (2020): Reinforcement Strategies for 3D‐Concrete‐Printing. In: civil engineering design, v. 2, n. 4 (August 2020).
- (2020): Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries. In: Materials and Structures, v. 53, n. 4 (26 Juni 2020).
- (2020): Bewehrungsstrategien für den Beton‐3D‐Druck. In: Beton- und Stahlbetonbau, v. 115, n. 8 (August 2020).
- (2019): Additive Fertigung im Bauwesen: 3D-Betondruck als eine Schlüsseltechnologie für die Digitalisierung der Bauwirtschaft. In: (2019): Ingenieurbaukunst 2020. Ernst & Sohn, Berlin (Deutschland), ISBN 9783433032886.
- (2019): Additive Fertigung im Bauwesen: erste 3‐D‐gedruckte und bewehrte Betonbauteile im Shotcrete‐3‐D‐Printing‐Verfahren (SC3DP). In: Bautechnik, v. 96, n. 12 (Dezember 2019).
- (2018): Penetration of cement pastes into sand packings during 3D printing: analytical and experimental study. In: Materials and Structures, v. 51, n. 1 (Februar 2018).
- : Beton, der prädestinierte Baustoff für die additive Fertigung. In: .
Structurae kooperiert mit
