Zhuangzhuang Liu 
- (2024): Evaluating the effect of high fly ash content and low curing temperature on early hydration heat of blended cement based on isothermal calorimetric method. In: Construction and Building Materials, v. 430 (Juni 2024).
- (2024): Hydration kinetics and apparent activation energy of cement pastes containing high silica fume content at lower curing temperature. In: Construction and Building Materials, v. 435 (Juli 2024).
- (2024): Laboratory measurement of the adhesion strength between asphalt concrete and ice layer. In: Construction and Building Materials, v. 416 (Februar 2024).
- (2023): Carbon nanotube (CNT) reinforced cementitious composites for structural self-sensing purpose: A review. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Fractional derivative Burgers models describing dynamic viscoelastic properties of asphalt binders. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2023): Analysis of micromechanical response to viscoelastic and plastic behaviors of asphalt mixture using a smart sensing technology. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2023): Improvement of microporous structure and impermeability of cement mortars using fly ash and blast furnace slag under low curing pressures. In: Construction and Building Materials, v. 401 (Oktober 2023).
- (2023): Frost-Related Damage of Portland Cement Pastes at Early Age. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 4 (April 2023).
- (2021): Cement filled with phosphorescent materials for pavement: Afterglow decay mechanism and properties. In: Construction and Building Materials, v. 284 (Mai 2021).
- (2022): Preparation and evaluation of a fluorinated nano-silica superhydrophobic coating for cement pavement. In: Construction and Building Materials, v. 360 (Dezember 2022).
- (2022): Study on dynamic responses of particle in aggregate mixture during the laboratory compaction utilizing Smart Aggregate. In: Construction and Building Materials, v. 344 (August 2022).
- (2021): Microwave heating properties of steel slag asphalt mixture using a coupled electromagnetic and heat transfer model. In: Construction and Building Materials, v. 291 (Juli 2021).
- (2022): Energy harvesting performance of a full-pressure piezoelectric transducer applied in pavement structures. In: Energy and Buildings, v. 266 (Juli 2022).
- (2021): New innovations in pavement materials and engineering: A review on pavement engineering research 2021. In: Journal of Traffic and Transportation Engineering (English Edition), v. 8, n. 6 (Dezember 2021).
- (2021): Energy harvesting array materials with thin piezoelectric plates for traffic data monitoring. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2021): Effect of Silane Coupling Agent on Improving Adhesive Property between Acidic Aggregate and Hydraulic Asphalt. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 7 (Juli 2021).
- (2020): Improved microwave heating uniformity and self-healing properties of steel slag asphalt containing ferrite filler. In: Materials and Structures, v. 54, n. 1 (16 Dezember 2020).
- (2021): Self-luminescent cement-based composite materials: properties and mechanisms. In: Construction and Building Materials, v. 269 (Februar 2021).
- (2020): High temperature property and modification mechanism of asphalt containing waste engine oil bottom. In: Construction and Building Materials, v. 261 (November 2020).
- (2020): Railway ballast stabilising agents: Comparison of mechanical properties. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): External sulfate attack on concrete under combined effects of flexural fatigue loading and drying-wetting cycles. In: Construction and Building Materials, v. 249 (Juli 2020).
- (2020): Effects of pre-curing treatment and chemical accelerators on Portland cement mortars at low temperature (5 °C). In: Construction and Building Materials, v. 240 (April 2020).
- (2018): Characterization of carbon fiber distribution in cement-based composites by Computed Tomography. In: Construction and Building Materials, v. 177 (Juli 2018).
- (2019): Microstructure characterization of Portland cement pastes influenced by lower curing pressures. In: Construction and Building Materials, v. 227 (Dezember 2019).
- (2015): Investigation on the Properties of Asphalt Mixtures Containing Antifreeze Fillers. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 6 (Juni 2015).
- (2014): Influence of the chloride-based anti-freeze filler on the properties of asphalt mixtures. In: Construction and Building Materials, v. 51 (Januar 2014).
- (2015): Laboratory investigation on the brucite fiber reinforced asphalt binder and asphalt concrete. In: Construction and Building Materials, v. 83 (Mai 2015).
- (2015): Experimental investigation on the properties and microstructure of magnesium oxychloride cement prepared with caustic magnesite and dolomite. In: Construction and Building Materials, v. 85 (Juni 2015).
- (2016): Effect of three-dimensional macrotexture characteristics on dynamic frictional coefficient of asphalt pavement surface. In: Construction and Building Materials, v. 126 (November 2016).
- (2017): Solar heating reflective coating layer (SHRCL) to cool the asphalt pavement surface. In: Construction and Building Materials, v. 139 (Mai 2017).
Structurae kooperiert mit
