Zhen Liu 
- : Study of the factors influencing the life cycle cost of green buildings using SEM-SD method. In: Journal of Asian Architecture and Building Engineering.
- (2024): Meso/Microscale Parameter Correlation Model of Sandstone Based on the Hoek–Brown Criterion and Parallel Bond Model. In: International Journal of Geomechanics, v. 24, n. 7 (Juli 2024).
- (2023): Rutting prediction of asphalt pavement with semi-rigid base: Numerical modeling on laboratory to accelerated pavement testing. In: Construction and Building Materials, v. 375 (April 2023).
- (2023): Study on the static and fatigue performance of MCL-shaped shear connectors. In: Structures, v. 56 (Oktober 2023).
- (2023): Service life prediction and environmental impact evaluation of recycled aggregate concrete with supplementary cementitious materials. In: Construction and Building Materials, v. 395 (September 2023).
- (2023): Permanent Deformation Monitoring and Remaining Life Prediction of Asphalt Pavement Combining Full-Scale Accelerated Pavement Testing and FEM. In: Structural Control and Health Monitoring, v. 2023 (Februar 2023).
- (2023): A study of the influence of separation bubbles around a generic freight train on pressure waves inside tunnels using 1D and 3D numerical methods. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 240 (September 2023).
- (2023): Performance evaluation of full-scale accelerated pavement using NDT and laboratory tests: A case study in Jiangsu, China. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2019): Optimized design of ultra-high performance concrete (UHPC) with a high wet packing density. In: Cement and Concrete Research, v. 126 (Dezember 2019).
- (2023): A novel compact bolted-type piezoelectric actuator excited by two excitation methods: design, simulation, and experimental investigation. In: Smart Materials and Structures, v. 32, n. 5 (März 2023).
- (2023): Trees help reduce street-side air pollution: A focus on cyclist and pedestrian exposure risk. In: Building and Environment, v. 229 (Februar 2023).
- (2023): Physics-Informed Optimization for Dynamic Soil–Structure Interaction Analysis of a Pile Partially Embedded in Nonlayered Soils. In: International Journal of Geomechanics, v. 23, n. 3 (März 2023).
- (2023): Mechanism and Performance of Graphene Modified Asphalt: An Experimental Approach Combined with Molecular Dynamic Simulations. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2022): Three-dimensional finite element analysis for structural parameters of asphalt pavement: A combined laboratory and field accelerated testing approach. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2022): Synthesis and properties of a fire-retardant coating based on intercalated expandable graphite-modified cellulose for steel structures. In: Journal of Building Engineering, v. 51 (Juli 2022).
- (2022): Studies on the validity of strain sensors for pavement monitoring: A case study for a fiber Bragg grating sensor and resistive sensor. In: Construction and Building Materials, v. 321 (Februar 2022).
- (2021): Snap-through response of thermally buckled C/SiC plates considering boundary elasticity and initial imperfections under progressive wave loading. In: Composite Structures, v. 276 (November 2021).
- (2021): Uncovering the approach to develop ultra-high performance concrete (UHPC) with dense meso-structure based on rheological point of view: Experiments and modeling. In: Construction and Building Materials, v. 271 (Februar 2021).
- (2020): Study of the flow around railway embankment of different heights with and without trains. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 202 (Juli 2020).
- (2020): Quantitative Identification of Near-Fault Ground Motions Based on Ensemble Empirical Mode Decomposition. In: KSCE Journal of Civil Engineering, v. 24, n. 3 (Februar 2020).
- (2019): Microstructure and microhardness property of the interface between a metakaolin/GGBFS-based geopolymer paste and granite aggregate. In: Construction and Building Materials, v. 221 (Oktober 2019).
- (2019): Scouring abrasion properties of nanomodified concrete under the action of chloride diffusion. In: Construction and Building Materials, v. 208 (Mai 2019).
- (2013): Multiscale Chemico-Thermo-Hydro-Mechanical Modeling of Early-Stage Hydration and Shrinkage of Cement Compounds. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 9 (September 2013).
- (2015): Mesoscale Analysis of Stress Distribution along ITZs in Recycled Concrete with Variously Shaped Aggregates under Uniaxial Compression. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 11 (November 2015).
- (2016): Nonlinear Wave–Current Interaction in Water of Finite Depth. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 142, n. 6 (November 2016).
- (2017): Porosity- and reliability-based evaluation of concrete-face rock dam compaction quality. In: Automation in Construction, v. 81 (September 2017).
- (2017): A novel plate type linear piezoelectric actuator using dual-frequency drive. In: Smart Materials and Structures, v. 26, n. 9 (September 2017).
- (2011): Numerical study of air chamber for oscillating water column wave energy convertor. In: China Ocean Engineering, v. 25, n. 1 (März 2011).
- (2019): Synthesis and Reaction Mechanism of an Alkali-Activated Metakaolin-Slag Composite System at Room Temperature. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 1 (Januar 2019).
- (2018): The Research and development of an innovative self-centering energy dissipation brace. In: The Structural Design of Tall and Special Buildings, v. 27, n. 15 (25 Oktober 2018).
Structurae kooperiert mit
