Lei Liu 
- (2024): Strengthening of hollow glass microspheres via a new K2CO3-KOH-activated ion-exchange strategy. In: Construction and Building Materials, v. 451 (November 2024).
- (2024): Recycling of graphite tailings: Effect of graphite tailings on property asphalt mortar and environmental impact evaluation. In: Construction and Building Materials, v. 452 (November 2024).
- (2024): Radial compression performance of glass fiber reinforced polyurethane composite tube with open-hole. In: Structures, v. 68 (Oktober 2024).
- (2024): Static and Dynamic Performance Analysis of Cable-Stayed Bridges with Cables Damaged Fire. In: Buildings, v. 14, n. 4 (27 März 2024).
- (2024): Study on high temperature dynamic characteristics and mesoscopic simulation of HFRC under dynamic and static combined loading. In: Structures, v. 60 (Februar 2024).
- (2023): Studies on the Thermal-Physical Treatment of Waste Concrete for Use in Lightweight Aggregate Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (Dezember 2023).
- (2023): Production of green, low-cost and high-performance anorthite-based ceramics from reduced copper slag. In: Construction and Building Materials, v. 375 (April 2023).
- (2022): Study on Early Shrinkage and Mechanical Properties of Concrete with Various Cementitious Materials. In: Buildings, v. 12, n. 10 (20 September 2022).
- (2023): Study on mechanical properties of stud connectors in steel-lightweight aggregate concrete composite structures. In: Structures, v. 47 (Januar 2023).
- (2022): Research on Soft Flutter of 420m-Span Pedestrian Suspension Bridge and Its Aerodynamic Measures. In: Buildings, v. 12, n. 8 (31 Juli 2022).
- (2022): Solidification/stabilization of chromium slag in red mud-based geopolymer. In: Construction and Building Materials, v. 316 (Januar 2022).
- (2021): Production of lightweight aggregate ceramsite from red mud and municipal solid waste incineration bottom ash: Mechanism and optimization. In: Construction and Building Materials, v. 287 (Juni 2021).
- (2022): Study on the seismic performance of rural houses masonry walls with different geometries of open-hole area reduction. In: Structures, v. 41 (Juli 2022).
- (2022): A Study on the Mechanical Properties and Microcosmic Mechanism of Basalt Fiber Modified Rubber Ceramsite Concrete. In: Buildings, v. 12, n. 2 (18 Januar 2022).
- (2021): Realizing pure shear mode of dielectric elastomers by tuning biaxial prestress of a deformation controller. In: Smart Materials and Structures, v. 31, n. 1 (23 November 2021).
- (2022): Quadrilateral scaled boundary spectral shell elements with assumed natural strains. In: Computers & Structures, v. 259 (Januar 2022).
- (2021): Study on the Retention of Large Mining Height and Small Coal Pillar under Thick and Hard Roof of Bayangaole Coal. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): Three-dimensional vortex-induced vibrations of a circular cylinder predicted using a wake oscillator model. In: Marine Structures, v. 80 (November 2021).
- (2021): Triaxial mechanical behaviour of hybrid basalt–polypropylene fibre-reinforced concrete: The effect of micro-fibres at multi scale levels. In: Materials and Structures, v. 54, n. 3 (16 April 2021).
- (2018): Relationship between the shrinkage crack characteristics and the water content gradient of compacted clay liner in a landfill final cover. In: Soils and Foundations, v. 58, n. 6 (Dezember 2018).
- (2020): Sludge biochar as a green additive in cement-based composites: Mechanical properties and hydration kinetics. In: Construction and Building Materials, v. 262 (November 2020).
- (2015): Thermal environment in the cotton textile workshop. In: Energy and Buildings, v. 102 (September 2015).
- (2020): Stiffness-tunable robotic gripper driven by dielectric elastomer composite actuators. In: Smart Materials and Structures, v. 29, n. 12 (30 Oktober 2020).
- (2020): Study on Seismic Behaviour of Cold Formed Steel Structure Based on Simplified Mechanical Model. In: IOP Conference Series: Materials Science and Engineering, v. 794 (Mai 2020).
- (2020): A Shear Strength Model for a Subsidence Backfill Body Based on Adhesion Friction Theory. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2020): Safety assessment for functionally graded structures with material nonlinearity. In: Structural Safety, v. 86 (September 2020).
- (2020): Temperature effect on electromechanical properties of polyacrylic dielectric elastomer: an experimental study. In: Smart Materials and Structures, v. 29, n. 4 (Februar 2020).
- (2010): REILP Approach for Uncertainty-Based Decision Making in Civil Engineering. In: Journal of Computing in Civil Engineering, v. 24, n. 4 (Juli 2010).
- (2016): Real-time observation of meso-fracture process in backfill body during mine subsidence using X-ray CT under uniaxial compressive conditions. In: Construction and Building Materials, v. 113 (Juni 2016).
- (2016): Topology optimization of adaptive fluid-actuated cellular structures with arbitrary polygonal motor cells. In: Smart Materials and Structures, v. 25, n. 5 (Mai 2016).
Structurae kooperiert mit
