Jing Liu 
- (2024): An online fault detection and diagnosis method of sensors in district heating substations based on long short_term memory network and adaptive threshold selection algorithm. In: Energy and Buildings, v. 308 (April 2024).
- (2024): Optimizing measurement schemes to improve indoor airflow and temperature CFD–EnKF joint simulation. In: Building and Environment, v. 248 (Januar 2024).
- (2022): A new permanent displacement model considering pulse-like ground motions and its application in landslide hazard assessment. In: Soil Dynamics and Earthquake Engineering, v. 163 (Dezember 2022).
- (2022): Improving indoor air flow and temperature prediction with local measurements based on CFD-EnKF data assimilation. In: Building and Environment, v. 223 (September 2022).
- (2022): An Infrared and Visible Image Fusion Method Based on Fuzzy Pulse Coupled Neural Network And Salience Detection. In: DYNA, v. 97, n. 5 (1 September 2022).
- (2022): Indoor Thermal Environment during Heating Season and the Health of Elderly in China. In: Science and Technology for the Built Environment, v. 28, n. 7 (August 2022).
- (2021): Investigation on strength characteristics of bio-asphalt mixtures based on the time–temperature equivalence principle. In: Construction and Building Materials, v. 309 (November 2021).
- (2022): Impact of Brine on Disjoining Pressure and Rock Wettability of Oil, Brine, and Mineral Systems. In: Journal of Energy Engineering, v. 148, n. 4 (August 2022).
- (2021): Indoor-outdoor relationship of PM2.5 mass concentrations in severe cold regions based on a coupled canopy model. In: Sustainable Cities and Society, v. 75 (Dezember 2021).
- (2021): Improvements on performance of bio-asphalt modified by castor oil-based polyurethane: An efficient approach for bio-oil utilization. In: Construction and Building Materials, v. 305 (Oktober 2021).
- (2021): Investigation of fungal contamination in urban houses with children in six major Chinese cities: Genus and concentration characteristics. In: Building and Environment, v. 205 (November 2021).
- (2021): A method for judging the overheating of the radiator in the compensation of window downdraught based on thermal image velocimetry. In: Building and Environment, v. 197 (Juni 2021).
- (2010): Field Measurement of the Convective Heat Transfer Coefficient on Vertical External Building Surfaces Using Naphthalene Sublimation Method. In: Journal of Building Physics, v. 33, n. 4 (März 2010).
- (2009): A novel method for full-scale measurement of the external convective heat transfer coefficient for building horizontal roof. In: Energy and Buildings, v. 41, n. 8 (August 2009).
- (2012): A method to weight three categories of adaptive thermal comfort. In: Energy and Buildings, v. 47 (April 2012).
- (2020): On-site measurement and zonal simulation on winter indoor environment and air infiltration in an atrium in a severe cold region. In: Energy and Buildings, v. 223 (September 2020).
- (2020): Machine learning-based leakage fault detection for district heating networks. In: Energy and Buildings, v. 223 (September 2020).
- (2013): Planning and Design of Contemporary Villa District. In: Applied Mechanics and Materials, v. 357-360 (August 2013).
- (2020): Indoor PM2.5 concentrations during winter in a severe cold region of China: A comparison of passive and conventional residential buildings. In: Building and Environment, v. 180 (August 2020).
- (2019): Physiological and thermal response to real-life transient conditions during winter in severe cold area. In: Building and Environment, v. 157 (Juni 2019).
- (2018): Investigating particles, VOCs, ROS produced from mosquito-repellent incense emissions and implications in SOA formation and human health. In: Building and Environment, v. 143 (Oktober 2018).
- (2018): Outdoor thermal comfort and adaptation in severe cold area: A longitudinal survey in Harbin, China. In: Building and Environment, v. 143 (Oktober 2018).
- (2017): An integrated local climatic evaluation system for green sustainable eco-city construction: A case study in Shenzhen, China. In: Building and Environment, v. 114 (März 2017).
- (2011): The impact of temperature on mean local air age and thermal comfort in a stratum ventilated office. In: Building and Environment, v. 46, n. 2 (Februar 2011).
- (2016): Mechanical performances of track-shaped rebar stiffened concrete-filled steel tubular (SCFRT) stub columns under axial compression. In: Thin-Walled Structures, v. 99 (Februar 2016).
- (2016): Flexural stiffness of steel-concrete composite beam under positive moment. In: Steel and Composite Structures, v. 20, n. 6 ( 2016).
- (2019): Flexural Capacity of Steel-Concrete Composite Beams under Hogging Moment. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2018): Optimizing the thermal performance of building envelopes for energy saving in underground office buildings in various climates of China. In: Tunnelling and Underground Space Technology, v. 77 (Juli 2018).
- (2018): Influence of the Stabilizer on Interfacial Bonding Behavior of Cement Asphalt Mortar in Slab Ballastless Track. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 10 (Oktober 2018).
- (1998): Finite-Element Model for Confined Concrete Columns. In: Journal of Structural Engineering (ASCE), v. 124, n. 9 (September 1998).
Structurae kooperiert mit
