Suchart Limkatanyu 
- (2024): Experimental and simulation analysis of RCA and para-wood ash as partial substitutes for NCA and cement in recycled aggregate concrete. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2014): Novel design equations for shear strength of local web-post buckling in cellular beams. In: Thin-Walled Structures, v. 76 (März 2014).
- (2024): Investigation on the tensile strength of Dendrocalamus sericeus, Phyllostachys makinoi, and Thyrsostachys oliveri bamboo: Experiment and simulations. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2023): A new concept of bio-based prestress technology with experimental Proof-of-Concept on Bamboo-Timber composite beams. In: Construction and Building Materials, v. 402 (Oktober 2023).
- (2023): Buckling behavior of Dendrocalamus sericeus Munro bamboo bars: Experiments and application. In: Journal of Building Engineering, v. 80 (Dezember 2023).
- (2023): Experimental study on flexural behaviours of fresh or aged hollow reinforced concrete girders strengthened by prestressed CFRP plates. In: Engineering Structures, v. 294 (November 2023).
- (2023): Performance evaluation of low-rise infilled reinforced concrete frames designed by considering local effects on column shear demand. In: Frontiers of Structural and Civil Engineering, v. 17, n. 5 (Mai 2023).
- (2022): Real time vibration measurement and inverse analysis for dynamic properties of an axisymmetric masonry structure. In: Journal of Asian Architecture and Building Engineering, v. 22, n. 4 (Dezember 2022).
- (2022): A machine learning regression approach for predicting the bearing capacity of a strip footing on rock mass under inclined and eccentric load. In: Frontiers in Built Environment, v. 8 (Februar 2022).
- (2022): Nonlinear Response of RC Columns Subjected to Equal Energy-Double Impact Loads. In: Buildings, v. 12, n. 9 (16 September 2022).
- (2022): Multi-strut and empirical formula-based macro modeling for masonry infilled RC frames. In: Engineering Structures, v. 266 (September 2022).
- (2022): Effect of synthetic microfiber and viscosity modifier agent on layer deformation, viscosity, and open time of cement mortar for 3D printing application. In: Construction and Building Materials, v. 319 (Februar 2022).
- (2021): Effect of graphene oxide on single fiber pullout behavior. In: Construction and Building Materials, v. 280 (April 2021).
- (2023): Experimental and numerical investigation on low-strength RC beams strengthened with side or bottom near surface mounted FRP rods. In: Structure and Infrastructure Engineering, v. 19, n. 11 (März 2023).
- (2021): Mechanical properties and electrical resistivity of multiwall carbon nanotubes incorporated into high calcium fly ash geopolymer. In: Case Studies in Construction Materials, v. 15 (Dezember 2021).
- (2021): Prediction of Shear Strength of Reinforced Recycled Aggregate Concrete Beams without Stirrups. In: Buildings, v. 11, n. 9 (25 August 2021).
- (2022): Correlation of Rapid Electrochemical and Traditional Performance-Based Test Results for Assessing the Degree of Sulfate Resistance in Concrete. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 46, n. 2 (Februar 2022).
- (2012): Natural stiffness matrix for beams on Winkler foundation: exact force-based derivation. In: Structural Engineering and Mechanics, v. 42, n. 1 (April 2012).
- (2021): Critical amount of corrosion and failure behavior of flexural reinforced concrete beams. In: Construction and Building Materials, v. 270 (Februar 2021).
- (2020): Manuscript title: Development of strength prediction models for fly ash based geopolymer concrete. In: Journal of Building Engineering, v. 32 (November 2020).
- (2021): A practical macro-mechanical model for the bend capacity of fibre-reinforced polymer bars. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 174, n. 10 (Oktober 2021).
- (2019): Nonlinear Frame Element with Shear–Flexure Interaction for Seismic Analysis of Non-Ductile Reinforced Concrete Columns. In: International Journal of Concrete Structures and Materials, v. 13, n. 1 (Januar 2019).
- (2015): Novel simplified equations for Vierendeel design of beams with (elongated) circular openings. In: Journal of Constructional Steel Research, v. 112 (September 2015).
- (2004): Failure Mode Analyses of Reinforced Concrete Beams Strengthened in Flexure with Externally Bonded Fiber-Reinforced Polymers. In: Journal of Composites for Construction, v. 8, n. 2 (April 2004).
- (2006): Frame element with lateral deformable supports: Formulations and numerical validation. In: Computers & Structures, v. 84, n. 13-14 (Mai 2006).
- (2012): Nonlinear Winkler-based beam element with improved displacement shape functions. In: KSCE Journal of Civil Engineering, v. 17, n. 1 (Mai 2012).
- (2003): Effects of reinforcement slippage on the non-linear response under cyclic loadings of RC frame structures. In: Earthquake Engineering and Structural Dynamics, v. 32, n. 15 (Dezember 2003).
- (2002): Reinforced Concrete Frame Element with Bond Interfaces. II: State Determinations and Numerical Validation. In: Journal of Structural Engineering (ASCE), v. 128, n. 3 (März 2002).
- (2002): Reinforced Concrete Frame Element with Bond Interfaces. I: Displacement-Based, Force-Based, and Mixed Formulations. In: Journal of Structural Engineering (ASCE), v. 128, n. 3 (März 2002).
- (2014): Improved nonlinear displacement-based beam element on a two-parameter foundation. In: European Journal of Environmental and Civil Engineering, v. 19, n. 6 (Oktober 2014).
Structurae kooperiert mit
