0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Khurshid, Hifsa / Mohammed, Bashar S. / Al-Yacouby, Ahmad Mahamad / Liew, M. S. / Zawawi, Noor Amila Wan Abdullah (2024): Analysis of hybrid offshore renewable energy sources for power generation: A literature review of hybrid solar, wind, and waves energy systems. In: Developments in the Built Environment, v. 19 (Oktober 2024).

    https://doi.org/10.1016/j.dibe.2024.100497

  2. Bheel, Naraindas / Mohammed, Bashar S. / Abdulkadir, Isyaka / Liew, M. S. / Zawawi, Noor Amila Wan Abdullah (2023): Effects of Graphene Oxide on the Properties of Engineered Cementitious Composites: Multi-Objective Optimization Technique Using RSM. In: Buildings, v. 13, n. 8 (2 August 2023).

    https://doi.org/10.3390/buildings13082018

  3. Bheel, Naraindas / Mohammed, Bashar S. / Liew, M. S. / Zawawi, Noor Amila Wan Abdullah (2023): Effect of Graphene Oxide as a Nanomaterial on the Durability Behaviors of Engineered Cementitious Composites by Applying RSM Modelling and Optimization. In: Buildings, v. 13, n. 8 (2 August 2023).

    https://doi.org/10.3390/buildings13082026

  4. Bheel, Naraindas / Mohammed, Bashar S. / Liew, M. S. / Zawawi, Noor Amila Wan Abdullah (2023): Durability Behaviours of Engineered Cementitious Composites Blended with Carbon Nanotubes against Sulphate and Acid Attacks by Applying RSM Modelling and Optimization. In: Buildings, v. 13, n. 8 (2 August 2023).

    https://doi.org/10.3390/buildings13082032

  5. Giri, Yajish Giri A/L Parama / Mohammed, Bashar S. / Liew, M. S. / Zawawi, Noor Amila Wan Abdullah / Abdulkadir, Isyaka / Singh, Priyanka / Ravindran, Gobinath (2023): Mechanical and Microstructural Properties of Rubberized Geopolymer Concrete: Modeling and Optimization. In: Buildings, v. 13, n. 8 (2 August 2023).

    https://doi.org/10.3390/buildings13082021

  6. Aswin, Muhammad / Al-Fakih, Amin / Syed, Zubair Imam / Liew, M. S. (2023): Influence of Different Dapped-End Reinforcement Configurations on Structural Behavior of RC Dapped-End Beam. In: Buildings, v. 13, n. 1 (13 Januar 2023).

    https://doi.org/10.3390/buildings13010116

  7. Hong, Wong Chi / Mohammed, Bashar S. / Abdulkadir, Isyaka / Liew, M. S. (2023): Modeling and Optimizing the Effect of Palm Oil Fuel Ash on the Properties of Engineered Cementitious Composite. In: Buildings, v. 13, n. 3 (26 Februar 2023).

    https://doi.org/10.3390/buildings13030628

  8. Abdulkadir, Isyaka / Mohammed, Bashar S. / Liew, M. S. / Wahab, M. M. A. (2021): Modelling and optimization of the mechanical properties of engineered cementitious composite containing crumb rubber pretreated with graphene oxide using response surface methodology. In: Construction and Building Materials, v. 310 (Dezember 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.125259

  9. Musarat, Muhammad Ali / Alaloul, Wesam Salah / Liew, M. S. (2021): Inflation rate and labours' wages in construction projects: economic relation investigation. In: Engineering, Construction and Architectural Management, v. 29, n. 6 (Juni 2021).

    https://doi.org/10.1108/ecam-07-2020-0478

  10. Al-Fakih, Amin / Mohammed, Bashar S. / Liew, M. S. (2021): On rubberized engineered cementitious composites (R-ECC): A review of the constituent material. In: Case Studies in Construction Materials, v. 14 (Juni 2021).

    https://doi.org/10.1016/j.cscm.2021.e00536

  11. Abdulkadir, Isyaka / Mohammed, Bashar S. / Liew, M. S. / Wahab, M. M. A. (2021): Modelling and multi-objective optimization of the fresh and mechanical properties of self-compacting high volume fly ash ECC (HVFA-ECC) using response surface methodology (RSM). In: Case Studies in Construction Materials, v. 14 (Juni 2021).

    https://doi.org/10.1016/j.cscm.2021.e00525

  12. Anwar, Abdullah / Mohammed, Bashar S. / Wahab, Mubarak Abdul / Liew, M. S. (2020): Enhanced properties of cementitious composite tailored with graphene oxide nanomaterial - A review. In: Developments in the Built Environment, v. 1 (Februar 2020).

    https://doi.org/10.1016/j.dibe.2019.100002

  13. Lye, Hui Li / Mohammed, Bashar S. / Liew, M. S. / Wahab, M. M. A. / Al-Fakih, Amin (2020): Bond behaviour of CFRP-strengthened ECC using Response Surface Methodology (RSM). In: Case Studies in Construction Materials, v. 12 (Juni 2020).

    https://doi.org/10.1016/j.cscm.2019.e00327

  14. Mohammed, Bashar S. / Aswin, Muhammad / Liew, M. S. (2020): Prediction of failure load of RC and R-ECC dapped-end beams. In: Case Studies in Construction Materials, v. 13 (Dezember 2020).

    https://doi.org/10.1016/j.cscm.2020.e00433

  15. Kim, D. K. / Choi, H. S. / Shin, C. S. / Liew, M. S. / Yu, S. Y. / Park, K. S. (2015): Fatigue performance of deepwater SCR under short-term VIV considering various S-N curves. In: Structural Engineering and Mechanics, v. 53, n. 5 (März 2015).

    https://doi.org/10.12989/sem.2015.53.5.881

  16. Al-Fakih, Amin / Mohammed, Bashar S. / Wahab, M. M. A. / Liew, M. S. / Mugahed Amran, Y. H. (2020): Flexural behavior of rubberized concrete interlocking masonry walls under out-of-plane load. In: Construction and Building Materials, v. 263 (Dezember 2020).

    https://doi.org/10.1016/j.conbuildmat.2020.120661

  17. Haruna, Sani / Mohammed, Bashar S. / Wahab, M. M. A. / Liew, M. S. (2020): Effect of paste aggregate ratio and curing methods on the performance of one-part alkali-activated concrete. In: Construction and Building Materials, v. 261 (November 2020).

    https://doi.org/10.1016/j.conbuildmat.2020.120024

  18. Mohammed, Bashar S. / Xian, Lee Wei / Haruna, Sani / Liew, M. S. / Abdulkadir, Isyaka / Zawawi, Nor Amila Wan Abdullah (2021): Deformation Properties of Rubberized Engineered Cementitious Composites Using Response Surface Methodology. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 45, n. 2 (April 2021).

    https://doi.org/10.1007/s40996-020-00444-3

  19. Musarat, Muhammad Ali / Alaloul, Wesam Salah / Liew, M. S. / Maqsoom, Ahsen / Qureshi, Abdul Hannan (2020): Investigating the impact of inflation on building materials prices in construction industry. In: Journal of Building Engineering, v. 32 (November 2020).

    https://doi.org/10.1016/j.jobe.2020.101485

  20. Al-Fakih, Amin / Mohammed, Bashar S. / Wahab, M. M. A. / Liew, M. S. / Mugahed Amran, Y. H. / Alyousef, Rayed / Alabduljabbar, Hisham (2020): Characteristic compressive strength correlation of rubberized concrete interlocking masonry wall. In: Structures, v. 26 (August 2020).

    https://doi.org/10.1016/j.istruc.2020.04.010

  21. Al-Fakih, Amin / Wahab, M. M. A. / Mohammed, Bashar S. / Liew, M. S. / Zawawi, Noor Amila Wan Abdullah / As'ad, Sholihin (2020): Experimental study on axial compressive behavior of rubberized interlocking masonry walls. In: Journal of Building Engineering, v. 29 (Mai 2020).

    https://doi.org/10.1016/j.jobe.2019.101107

  22. Khed, Veerendrakumar C. / Mohammed, Bashar S. / Liew, M. S. / Zawawi, Noor Amila Wan Abdullah (2020): Development of response surface models for self-compacting hybrid fibre reinforced rubberized cementitious composite. In: Construction and Building Materials, v. 232 (Januar 2020).

    https://doi.org/10.1016/j.conbuildmat.2019.117191

  23. Mohammed, Bashar S. / Aswin, Muhammad / Liew, M. S. / Zawawi, Noor Amila Wan Abdullah (2019): Structural Performance of RC and R-ECC Dapped-End Beams Based on the Role of Hanger or Diagonal Reinforcements Combined by ECC. In: International Journal of Concrete Structures and Materials, v. 13, n. 1 (Januar 2019).

    https://doi.org/10.1186/s40069-019-0356-x

  24. Ayilara, A. Q. / Liew, M. S. (2017): Impact of the Overloading of Heavy Goods Vehicles on the Fatigue Life of Steel Bridges. Vorgetragen bei: Structures Congress 2017, April 6–8, 2017, Denver, Colorado.

    https://doi.org/10.1061/9780784480403.037

  25. Mohammed, Bashar S. / Haruna, Sani / Mubarak bn Abdul Wahab, Mohamed / Liew, M. S. (2019): Optimization and characterization of cast in-situ alkali-activated pastes by response surface methodology. In: Construction and Building Materials, v. 225 (November 2019).

    https://doi.org/10.1016/j.conbuildmat.2019.07.267

  26. Achara, Bitrus Emmanuel / Mohammed, Bashar S. / Liew, M. S. (2019): Bond behaviour of nano-silica-modified self-compacting engineered cementitious composite using response surface methodology. In: Construction and Building Materials, v. 224 (November 2019).

    https://doi.org/10.1016/j.conbuildmat.2019.07.115

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine