Yong Li 
- (2024): Combined preparation and application of geopolymer pavement materials from coal slurry-slag powder-fly ash mining solid waste: A case study. In: Construction and Building Materials, v. 441 (August 2024).
- (2024): Cyclic Loading Experiments on Seismic Performance of Precast Concrete Superposed Shear Walls with CFST End Columns. In: Journal of Building Engineering, v. 96 (November 2024).
- : Building damage inspection method using UAV-based data acquisition and deep learning-based crack detection. In: Journal of Civil Structural Health Monitoring.
- (2024): Enhanced Prediction and Uncertainty Analysis for In-Plane and Out-of-Plane Resistance of Unreinforced Masonry Walls: A Multifidelity Approach. In: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, v. 10, n. 4 (Dezember 2024).
- (2024): Analysis of the non-uniform thermal environment of local floor and ceiling radiant heating: Numerical simulation and thermal comfort experiment. In: Building and Environment, v. 262 (August 2024).
- (2024): Deformation behavior and scale effects in microchannel hydroforming in ultra-thin TA1/CFRP fuel cell bipolar plates. In: Composite Structures, v. 339 (Juli 2024).
- (2024): Effect of connection methods on hygrothermal performance of prefabricated concrete building walls. In: Journal of Building Engineering, v. 90 (August 2024).
- (2024): Evaluating fracture resistance of basalt fiber reinforced mortar to mode I/III load using edge notched disc bend (ENDB) specimen: Insights from acoustic emission and morphological analysis. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2023): Bearing fault diagnosis method based on complete center frequency distribution feature. In: Structural Health Monitoring, v. 22, n. 6 (April 2023).
- (2023): Efficient modeling of steel bar slippage effect in reinforced concrete structures using a newly implemented nonlinear element. In: Computers & Structures, v. 279 (April 2023).
- (2023): Deterioration of mechanical properties at the anchor-mortar interface considering the effect of two-phase corrosion. In: Construction and Building Materials, v. 370 (März 2023).
- (2022): Bond-slip model uncertainty quantification and effect on nonlinear behavior simulations of reinforced concrete columns. In: Engineering Structures, v. 266 (September 2022).
- (2022): Differential impacts of urbanization characteristics on city-level carbon emissions from passenger transport on road: Evidence from 360 cities in China. In: Building and Environment, v. 219 (Juli 2022).
- (2022): Acoustic emission characteristics and energy mechanism of CFRP-jacketed coal specimens under uniaxial compression. In: Construction and Building Materials, v. 342 (August 2022).
- (2022): Destructive test study of the flexural load capacity of a full-scale reinforced concrete T-girder strengthened by externally prestressed CFRP plates. In: Case Studies in Construction Materials, v. 16 (Juni 2022).
- (2022): Assessing the potential and utilization of solar energy at the building-scale in Shanghai. In: Sustainable Cities and Society, v. 82 (Juli 2022).
- (2021): Development of enhanced fiber beam element with multi-axial material constitutive models for reinforced/prestressed concrete beams. In: Engineering Structures, v. 248 (Dezember 2021).
- (2021): Effect of Ca/(Si + Al) on red mud based eco-friendly revetment block: Microstructure, durability and environmental performance. In: Construction and Building Materials, v. 304 (Oktober 2021).
- (2021): The effects of dilatancy in composite assemblies as micropolar continua. In: Composite Structures, v. 276 (November 2021).
- (2012): Application of Lead Extrusion Dampers for Seismic Control of Viaducts. In: Journal of Highway and Transportation Research and Development (English Edition), v. 6, n. 3 (September 2012).
- (2018): Detection of double defects for plate-like structures based on a fuzzy c-means clustering algorithm. In: Structural Health Monitoring, v. 18, n. 3 (März 2018).
- (2017): Effects of load optimization and geometric arrangement on the thermal performance of borehole heat exchanger fields. In: Sustainable Cities and Society, v. 35 (November 2017).
- (2019): Bayesian updating of complex nonlinear FE models with high-dimensional parameter space using heterogeneous measurements and a batch-recursive approach. In: Engineering Structures, v. 201 (Dezember 2019).
- (2020): Effects of sulfate on the mechanical performances and hydration characteristics of red mud based non-burnt brick. In: Construction and Building Materials, v. 262 (November 2020).
- (2016): The effect of spatial and temporal randomness of stochastically generated occupancy schedules on the energy performance of a multiresidential building. In: Energy and Buildings, v. 127 (September 2016).
- (2020): Calcium chloride hexahydrate/nano-SiO2 composites as form-stable phase change materials for building energy conversation: The influence of pore size of nano-SiO2. In: Energy and Buildings, v. 208 (Februar 2020).
- (2019): Development of RC model for thermal dynamic analysis of buildings through model structure simplification. In: Energy and Buildings, v. 195 (Juli 2019).
- (2019): Efficient Simulation of RC Shear Walls in High-Rise Buildings Using a Practical Multi-Cross-Line-Model. In: Journal of Earthquake Engineering, v. 25, n. 9 (Mai 2019).
- (2019): Assessment of the Strengthening of Existing Benchmark Monorail Railway Bridge: A Case Study of a Generic Method for Lateral Reinforcement. In: Structural Engineering International, v. 29, n. 3 (Juli 2019).
- (2016): Effects of seismic isolation on the seismic response of a California high-speed rail prototype bridge with soil-structure and track-structure interactions. In: Earthquake Engineering and Structural Dynamics, v. 45, n. 15 (Dezember 2016).
Structurae kooperiert mit
