Ye Li 
- : Non-linear relationship between built environment and active travel: A hybrid model considering spatial heterogeneity. In: International Journal of Transportation Science and Technology.
- (2024): Multi-scale image-based damage recognition and assessment for reinforced concrete structures in post-earthquake emergency response. In: Engineering Structures, v. 314 (September 2024).
- (2024): Mechanistic prediction of folding angles in 4D printed shape memory polymers under varied loading conditions. In: Smart Materials and Structures, v. 33, n. 3 (2 Februar 2024).
- (2024): Impact of supplementary cementitious materials on the solid–liquid equilibrium curve of calcium in cement hydrates. In: Materials and Structures, v. 57, n. 3 (5 März 2024).
- (2023): Study of the spent catalysts as internal curing agents on the hydration kinetics and microstructure development of ultra-high performance concrete (UHPC). In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2023): Identification of experienced temperature in mortar and concrete using microstructural image and deep learning. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2023): Shear Mechanism and Size Effect of RC Deep Beams without Stirrups Based on Crack Kinematics in Tests. In: Journal of Structural Engineering (ASCE), v. 149, n. 11 (November 2023).
- (2023): Stress Analysis and Structural Optimization of Steel–Concrete Joint of Zhonghua Road Bridge in Liaocheng. In: Advances in Civil Engineering, v. 2023 (Februar 2023).
- (2023): An improved homotopy perturbation method for dynamic force reconstruction. In: Structures, v. 54 (August 2023).
- (2023): Image-based reinforced concrete component mechanical damage recognition and structural safety rapid assessment using deep learning with frequency information. In: Automation in Construction, v. 150 (Juni 2023).
- (2023): Numerical Investigation of Thermal Performance with Adaptive Terminal Devices for Cold Aisle Containment in Data Centers. In: Buildings, v. 13, n. 2 (14 Februar 2023).
- (2023): Influence of seawater and sea sand on the performance of Anti-washout underwater concrete: The overlooked significance of Mg2+. In: Construction and Building Materials, v. 374 (April 2023).
- (2023): Mechanical strength, shrinkage, and porosity of mortar reinforced with areca nut husk fibers. In: Construction and Building Materials, v. 363 (Januar 2023).
- (2023): Underactuated control and analysis of single blade installation using a jackup installation vessel and active tugger line force control. In: Marine Structures, v. 88 (März 2023).
- (2022): Impact of overburnt distorted brick aggregate on the performance of concrete at ambient temperature and after exposure to elevated temperatures. In: Construction and Building Materials, v. 349 (September 2022).
- (2021): Shear behavior of fiber-reinforced concrete hollow-core slabs under elevated temperatures. In: Construction and Building Materials, v. 275 (März 2021).
- (2021): Pore pressure build-up and explosive spalling in concrete at elevated temperature: A review. In: Construction and Building Materials, v. 284 (Mai 2021).
- (2022): Shear strength evaluation of RC D-Regions based on Single-Panel Strut-and-Tie model. In: Engineering Structures, v. 265 (August 2022).
- (2022): Univariate analysis of scaling effects on the aerodynamics of vertical axis wind turbines based on high-resolution numerical simulations: The Reynolds number effects. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 223 (April 2022).
- (2021): A Study on Axial Compression Performance of Large Diameter-Thickness Ratio Concrete-Filled Gas Drainage Steel Pipe. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2014): Porous thermal insulation materials derived from fly ash using a foaming and slip casting method. In: Energy and Buildings, v. 81 (Oktober 2014).
- (2014): Numerical investigation on effects of rotor control strategy and wind data on optimal wind turbine blade shape. In: Wind & Structures, v. 18, n. 2 (Februar 2014).
- (2018): Influence of aggregate size and inclusion of polypropylene and steel fibers on the hot permeability of ultra-high performance concrete (UHPC) at elevated temperature. In: Construction and Building Materials, v. 169 (April 2018).
- (2018): Synthesis and Arsenic Removal on Ferruginous Manganese Ore Composite Materials. Vorgetragen bei: 2012 International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE 2012), August 10-12th 2012, Zhangjiajie (China).
- (2018): Modelling and evaluating the economics of inland waterway transport on the Hangyong canal, China. In: Proceedings of the Institution of Civil Engineers - Transport, v. 171, n. 6 (Dezember 2018).
- (2017): Using personal carbon dioxide trading to promote cleaner cars. In: Proceedings of the Institution of Civil Engineers - Transport, v. 170, n. 2 (April 2017).
- (2015): Underwater terrain positioning method based on least squares estimation for AUV. In: China Ocean Engineering, v. 29, n. 6 (November 2015).
- (2018): A parametric study on the final blade installation process for monopile wind turbines under rough environmental conditions. In: Engineering Structures, v. 172 (Oktober 2018).
Structurae kooperiert mit
