Qiang Li 
- (2024): Optimal Mix Design and Mechanical Properties of Rapid-Hardening Foam Concrete. In: Advances in Civil Engineering, v. 2024 (Januar 2024).
- (2023): Pore structures and interfacial properties between hydrated magnesia carbonates-modified recycled aggregate and reactive magnesia paste. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): The role of ultra-fine supplementary cementitious materials in the durability and microstructure of airport pavement concrete. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Statistic investigation on chloride ions distribution based on numerical reconstruction of in situ meso-structure of concrete. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2023): Research on the influence of an adhesive layer on the monitoring signal of piezoelectric sensors. In: Smart Materials and Structures, v. 32, n. 11 (19 Oktober 2023).
- (2023): Performance degradation assessment for mechanical system based on semi-analytical solution of self-similar stable distribution process. In: Structural Health Monitoring, v. 23, n. 3 (September 2023).
- (2023): Microscopic Analysis of Aging Characteristics of SBS-Modified Asphalt Based on FTIR Technology. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 11 (November 2023).
- (2023): Study on the Adhesion Characteristics of Asphalt-Aggregate Interface in Cold Recycled Asphalt Mixtures. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 9 (September 2023).
- (2023): Seismic behavior of prestressed concrete filled steel tubular lattice tower subjected to combined compression-bending-torsion. In: Journal of Constructional Steel Research, v. 204 (Mai 2023).
- : Response Analysis of a Long-span Arch Bridge under the Seismic Traveling Excitation. Vorgetragen bei: Structures Congress 2013, Pittsburgh, Pennsylvania, May 2-4, 2013.
- (2023): Numerical analysis and conversion of dynamic and static deflection of asphalt pavement under FWD loading. In: Construction and Building Materials, v. 367 (Februar 2023).
- (2023): Pull-out resistance of stud groups embedded in concrete. In: Structures, v. 47 (Januar 2023).
- (2022): Repair effect of cracked reinforced concrete based on electrochemical rehabilitation technology. In: Journal of Building Engineering, v. 61 (Dezember 2022).
- (2022): Non‐destructive evaluation of longitudinal cracking in semi‐rigid asphalt pavements using FWD deflection data. In: Structural Control and Health Monitoring, v. 29, n. 10 (13 September 2022).
- (2022): Rheology, Chemical Composition, and Microstructure of the Asphalt Binder in Fine Aggregate Matrix after Different Long-Term Laboratory Aging Procedures. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 4 (April 2022).
- (2021): Reflection Crack Analysis of Asphalt Overlay on Cement Concrete Pavement Based on XFEM. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2022): POINT: Partially Observable Imitation Network for Traffic Signal Control. In: Sustainable Cities and Society, v. 76 (Januar 2022).
- (2021): Monitoring the Deterioration of Masonry Relics at a UNESCO World Heritage Site. In: KSCE Journal of Civil Engineering, v. 25, n. 8 (Juni 2021).
- (2016): Reducing the Effect of Inaccurate Lane Identification on PP69-10-Based Rut Characterization. In: Journal of Infrastructure Systems, v. 22, n. 1 (März 2016).
- (2021): Study of wiring method on accelerated corrosion of steel bars in concrete. In: Construction and Building Materials, v. 269 (Februar 2021).
- (2020): Repair effect of bidirectional electromigration rehabilitation on concrete structures at different durability deterioration stages. In: Construction and Building Materials, v. 251 (August 2020).
- (2011): Pavement Smoothness Prediction Based on Fuzzy and Gray Theories. In: Computer-Aided Civil and Infrastructure Engineering, v. 26, n. 1 ( 2011).
- (2018): Model-Selection Uncertainty Quantifications in HFFB Dynamic Analyses of a Complex Tall Building. In: Journal of Engineering Mechanics (ASCE), v. 144, n. 6 (Juni 2018).
- (2015): Performance-based design optimization of tall concrete framed structures subject to wind excitations. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 139 (April 2015).
- (2015): Seismic design or retrofit of buildings with metallic structural fuses by the damage-reduction spectrum. In: Earthquake Engineering and Engineering Vibration, v. 14, n. 1 (Februar 2015).
- (2014): Newly Developed Adhesive Strength Test for Measuring the Strength of Sealant between Joints of Concrete Pavement. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 12 (Dezember 2014).
- (2012): A simple fatigue performance model of asphalt mixtures based on fracture energy. In: Construction and Building Materials, v. 27 (Februar 2012).
- (2011): Model test study on the dynamic response of the portal section of two parallel tunnels in a seismically active area. In: Tunnelling and Underground Space Technology, v. 26, n. 2 (März 2011).
- (2015): Numerical simulation and experimental study of the effects of disposal space on the flow field around the combined three-tube reefs. In: China Ocean Engineering, v. 29, n. 3 (Juni 2015).
- (2018): Numerical Calculation Analysis of the Structural Stability of Cemented Fill under Different Cement-Sand Ratios and Concentration Conditions. In: Advances in Civil Engineering, v. 2018 ( 2018).
Structurae kooperiert mit
