Peng Li 
- (2024): Mechanical property testing and damage assessment of the regenerated rock mass with very weakly bonded cement. In: Frontiers in Built Environment, v. 10 (Februar 2024).
- (2024): Multi-objective topology optimization of macro structure and microtubule network structure for self-healing material. In: Smart Materials and Structures, v. 33, n. 10 (18 September 2024).
- (2024): Performance of profile steel CFDSP composite walls under compression and bending loads. In: Structures, v. 68 (Oktober 2024).
- (2024): Macro-meso fracture and instability of rock-backfill composite structure (RBCS) specimens subjected to fatigue-creep interaction loading: Cement-tailing ratio effect. In: Construction and Building Materials, v. 420 (März 2024).
- (2024): Passivation of cold-sprayed zinc-coated steel bars in simulated concrete pore solution. In: Journal of Building Engineering, v. 89 (Juli 2024).
- (2024): Large Section of Soft Rock Gob-Side Entry Retaining Surrounding Rock Control. In: Advances in Civil Engineering, v. 2024 (Januar 2024).
- (2024): Nondestructive testing of seepage in check dams using high-density electrical resistivity tomography based on laboratory test. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2024): Lateral performance of cold-formed steel framed shear walls using slitted sheathing with stiffeners. In: Engineering Structures, v. 302 (März 2024).
- (2023): Mechanical properties and thermo-chemical damage constitutive model of granite subjected to thermal and chemical treatments under uniaxial compression. In: Construction and Building Materials, v. 390 (August 2023).
- (2023): A novel wave tomography method for defect reconstruction with various arrays. In: Structural Health Monitoring, v. 23, n. 1 (Mai 2023).
- (2023): Numerical Computation on the Hydrodynamic Characteristics of an AUV near Uneven Seabed Based on Schwarz-Christoffel Mapping. In: International Journal of Offshore and Polar Engineering, v. 33, n. 1 (1 März 2023).
- (2023): Monitoring and quantification of non-uniform corrosion induced mass loss of steel piles with distributed optical fiber sensors. In: Automation in Construction, v. 148 (April 2023).
- (2023): Luminous and bonding performance of self-luminescent cementitious coatings based on white cement and geopolymer. In: Construction and Building Materials, v. 362 (Januar 2023).
- (2021): The Mechanism of Rock Mass Crack Propagation of Principal Stress Rotation in the Process of Tunnel Excavation. In: Shock and Vibration, v. 2021 (Januar 2021).
- (2021): Mechanical Behavior, Energy Release, and Crack Distribution Characteristics of Water-Saturated Phyllite under Triaxial Cyclic Loading. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2022): A nonlinear analytical model for predicting bond behavior of FRP-to-concrete/steel substrate joints subjected to temperature variations. In: Construction and Building Materials, v. 320 (Februar 2022).
- (2022): Numerical simulation of Lamb wave sensing of low-velocity impact damage in composite laminate. In: Composite Structures, v. 279 (Januar 2022).
- (2021): Optimization of Hydrodynamic Performance of Ocean Bottom Flying Node. In: International Journal of Offshore and Polar Engineering, v. 31, n. 4 (1 Dezember 2021).
- (2017): Optimal Design of Midblock Crosswalk to Achieve Trade-Off between Vehicles and Pedestrians. In: Journal of Transportation Engineering, Part A: Systems, v. 143, n. 1 (Januar 2017).
- (2018): Labor crew workspace analysis for prefabricated assemblies’ installation. A 4D-BIM-based approach. In: Engineering, Construction and Architectural Management, v. 25, n. 3 (April 2018).
- (2021): Investigation on Methods of Determining the Grouting Quality of Embedded Rock Bolts Using High Frequency Guided Waves. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2020): Mechanical behaviors of GFRP tube confined recycled aggregate concrete with sea sand. In: Advances in Structural Engineering, v. 24, n. 6 (Dezember 2020).
- (2020): A numerical study on the transverse seismic response of lined circular tunnels under obliquely incident asynchronous P and SV waves. In: Tunnelling and Underground Space Technology, v. 97 (März 2020).
- (2019): Numerical simulation and absorbing boundary conditions for wave propagation in a semi-infinite media with a linear isotropic hardening plastic model. In: Soil Dynamics and Earthquake Engineering, v. 125 (Oktober 2019).
- (2011): Materials and Temperature Effects on the Resilient Response of Asphalt-Treated Alaskan Base Course Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 2 (Februar 2011).
- (2012): Low Temperature Performance of Sasobit-Modified Warm-Mix Asphalt. In: Journal of Materials in Civil Engineering (ASCE), v. 24, n. 1 (Januar 2012).
- (2016): Performance of Multiaxial Paving Interlayer–Reinforced Asphalt Pavement. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 7 (Juli 2016).
- (2011): Laboratory Evaluation of Sasobit-Modified Warm-Mix Asphalt for Alaskan Conditions. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 11 (November 2011).
- (2018): The mechanical analysis of thermo-magneto-electric laminated composites in nanoscale with the consideration of surface and flexoelectric effects. In: Smart Materials and Structures, v. 27, n. 1 (Januar 2018).
- (2013): Investigation of trapped thickness-twist waves induced by functionally graded piezoelectric material in an inhomogeneous plate. In: Smart Materials and Structures, v. 22, n. 9 (September 2013).
Structurae kooperiert mit
