Ning Li 
- (2024): Offline iteration-based real-time hybrid simulation for high-fidelity fluid-structure dynamic interaction in structures subjected to seismic excitation. In: Computers & Structures, v. 305 (Dezember 2024).
- (2024): Numerical studies on low-temperature eccentric-compression behaviours of UHPC-filled Q690E high-strength steel tubes. In: Journal of Constructional Steel Research, v. 221 (Oktober 2024).
- (2024): A Numerical Model for the Bearing Capacity of Anchoring Interface in Composite Rock Mass by A Modified Nonlinear Bond-Slip Model. In: KSCE Journal of Civil Engineering, v. 28, n. 9 (23 Juli 2024).
- (2024): On the displacement control performance of base-isolated structures incorporating nonlinear negative stiffness device. In: Structures, v. 64 (Juni 2024).
- (2024): Isolation performance evaluation of base-isolated system with active nonlinear negative stiffness devices. In: Soil Dynamics and Earthquake Engineering, v. 179 (April 2024).
- (2024): Measuring and modeling of residential black carbon concentrations in two megacities, China. In: Building and Environment, v. 257 (Juni 2024).
- (2024): Mist Spraying as an Outdoor Cooling Spot in Hot-Humid Areas: Effect of Ambient Environment and Impact on Short-Term Thermal Perception. In: Buildings, v. 14, n. 2 (1 Februar 2024).
- (2023): Microstructure characteristics and evolution of the bonding interface between SCC and steam-cured concrete. In: Construction and Building Materials, v. 400 (Oktober 2023).
- (2023): Investigation of Uniaxial Compression Stress–Strain Relationship of Early Age Manufactured Sand Concrete and Its Application. In: Buildings, v. 13, n. 9 (23 August 2023).
- (2023): Microstructure evolution and impact resistance of crumb rubber concrete after elevated temperatures. In: Construction and Building Materials, v. 384 (Juni 2023).
- (2017): Microstructural changes in alkali-activated slag mortars induced by accelerated carbonation. In: Cement and Concrete Research, v. 100 (Oktober 2017).
- (2023): Novel application of electrochemical chloride extraction fixing polymer-modified conductive repair mortar as anode. In: Construction and Building Materials, v. 369 (März 2023).
- (2022): Investigation on the utilization of coal gasification slag in Portland cement: Reaction kinetics and microstructure. In: Construction and Building Materials, v. 323 (März 2022).
- (2022): Multi-scale modeling of the concrete SHPB test based on DEM-FDM coupling method. In: Construction and Building Materials, v. 356 (November 2022).
- (2022): Optimization of the whole-waste binder containing molten iron desulfurization slag from Kambara Reactor for concrete production. In: Journal of Building Engineering, v. 54 (August 2022).
- (2021): Investigation of the adhesive and cohesive properties of asphalt, mastic, and mortar in porous asphalt mixtures. In: Construction and Building Materials, v. 276 (März 2021).
- (2022): Performance Characterizations of Vulcanized Eucommia Ulmoides Gum-Modified. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 4 (April 2022).
- (2022): Laboratory investigation on blending process of reclaimed asphalt mixture. In: Construction and Building Materials, v. 325 (März 2022).
- (2021): The mechanism of hydration reaction of granulated blast furnace slag-steel slag-refining slag-desulfurization gypsum-based clinker-free cementitious materials. In: Journal of Building Engineering, v. 44 (Dezember 2021).
- (2021): A novel wind resistance sliding support with large sliding displacement and high tensile strength for metal roof system. In: Engineering Structures, v. 243 (September 2021).
- (2019): Performance of Unbound Aggregate Materials under Single-Stage and Multistage Loading Modes Based on Precision Unbounded Material Analyzer. In: Journal of Highway and Transportation Research and Development (English Edition), v. 13, n. 2 (Juni 2019).
- (2021): Numerical Analysis of the Width Design of a Protective Pillar in High-Stress Roadway: A Case Study. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): A New Statistical Parameter for Determining Joint Roughness Coefficient (JRC) considering the Shear Direction and Contribution of Different Protrusions. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): Investigation of the aging behavior of cellulose fiber in reclaimed asphalt pavement. In: Construction and Building Materials, v. 271 (Februar 2021).
- (2018): A multi-occupants’ comfort-driven and energy-efficient control strategy of VAV system based on learned thermal comfort profiles. In: Science and Technology for the Built Environment, v. 24, n. 10 (November 2018).
- (2017): Numerical study on the active vibration isolation by wave impeding block in saturated soils under vertical loading. In: Soil Dynamics and Earthquake Engineering, v. 93 (Februar 2017).
- (2019): A New Method to Estimate the Joint Roughness Coefficient by Back Calculation of Shear Strength. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2015): The mechanism of different thermoregulation types of composite shape-stabilized phase change materials used in asphalt pavement. In: Construction and Building Materials, v. 98 (November 2015).
- (2017): Predicting rock burst hazard with incomplete data using Bayesian networks. In: Tunnelling and Underground Space Technology, v. 61 (Januar 2017).
- (2018): Modeling of Coupled Heat-Moisture Transfer and Deformation Behavior of Frozen Soil. In: Soil Mechanics and Foundation Engineering, v. 55, n. 3 (Juli 2018).
Structurae kooperiert mit
