Liang Li 
- (2024): Modelling of water sorption hysteresis of cement-based materials based on pore microstructure. In: Journal of Building Engineering, v. 98 (Dezember 2024).
- (2024): Influence of strain rate and fiber blend mode on the tensile behaviors of steel-polyethylene hybrid fiber reinforced engineered cementitious composites. In: Construction and Building Materials, v. 438 (August 2024).
- (2025): Mechanical properties and damage characteristics of modified polyurethane concrete under uniaxial and cyclic compression. In: Construction and Building Materials, v. 458 (Januar 2025).
- (2024): A multiaxial multiscale compressive thermo-mechanical damage model for Fiber Reinforced Cementitious Composites (FRCC). In: Journal of Building Engineering, v. 94 (Oktober 2024).
- (2024): A multiaxial thermo-mechanical damage model for concrete including Load Induced Thermal Strain (LITS). In: Structures, v. 67 (September 2024).
- (2024): Natural Vibration Characteristics of a Cantilever Beam Parametrically Excited by Pitch Motion. In: International Journal of Structural Stability and Dynamics, v. 24, n. 12 (Juni 2024).
- (2024): A multiscale thermo-mechanical coupling model for Fiber-Reinforced Cementitious Composite (FRCC). In: Construction and Building Materials, v. 425 (April 2024).
- (2024): Modeling and vibration control of a rotating flexible plate actuated by MFC. In: Composite Structures, v. 331 (März 2024).
- (2024): Nonlinear Analysis of Slope Stability Considering Geomaterial Dilatancy. In: International Journal of Geomechanics, v. 24, n. 4 (April 2024).
- (2023): Properties of Cement Mortars Subject to Varied Carbonation Treatments at Early Ages. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (Dezember 2023).
- (2022): Investigation of the Load–Settlement Response of Piles in Sand Using an Interface Constitutive Model. In: International Journal of Geomechanics, v. 22, n. 11 (November 2022).
- (2022): A new approach to land use optimization and simulation considering urban development sustainability: A case study of Bortala, China. In: Sustainable Cities and Society, v. 87 (Dezember 2022).
- (2012): Investigation of convection control under the non-uniform RMF in a liquid bridge. In: Procedia Engineering, v. 31 ( 2012).
- (2019): Monitoring and characterizing the deformation of an earth dam in Guangxi Province, China. In: Engineering Geology, v. 248 (Januar 2019).
- (2021): Large deformations of piezoelectric laminated beams based on the absolute nodal coordinate formulation. In: Composite Structures, v. 275 (November 2021).
- (2019): Limit Equilibrium Analysis of Slope Stability with Coupling Nonlinear Strength Criterion and Double-Strength Reduction Technique. In: International Journal of Geomechanics, v. 19, n. 6 (Juni 2019).
- (2020): Porous Carbon Spheres Derived from Waste Ion-Exchange Resins and Research on Adsorption of Methylene Blue. In: Journal of Environmental Engineering (ASCE), v. 146, n. 7 (Juli 2020).
- (2021): A nonlinear dynamical model for rotating composite thin-walled beams subjected to hygrothermal effects. In: Composite Structures, v. 256 (Januar 2021).
- (2020): Rock slope reliability analysis using Barton-Bandis failure criterion with modified pseudo-dynamic approach. In: Soil Dynamics and Earthquake Engineering, v. 139 (Dezember 2020).
- (2020): On the Location of Multiple Failure Slip Surfaces in Slope Stability Problems Using the Meshless SPH Algorithm. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2019): A New Buckling-Restrained Brace with a Variable Cross-Section Core. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2015): Seismic active earth pressure of cohesive-frictional soil on retaining wall based on a slice analysis method. In: Soil Dynamics and Earthquake Engineering, v. 70 (März 2015).
- (2019): Risk Assessment of Slope Failure Using Assumption of Maximum Area of Sliding Mass and Factor of Safety Equal to Unit. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2013): Rheological Properties and Chemical Bonding of Asphalt Modified with Nanosilica. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 11 (November 2013).
- (2012): Performance of asphalt binder blended with non-modified and polymer-modified nanoclay. In: Construction and Building Materials, v. 35 (Oktober 2012).
- (2013): Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy. In: Construction and Building Materials, v. 38 (Januar 2013).
- (2015): Risk assessment of slope failure by representative slip surfaces and response surface function. In: KSCE Journal of Civil Engineering, v. 20, n. 5 (Oktober 2015).
- (2008): The reversed cyclic load tests of normal and pre-stressed concrete beams. In: Engineering Structures, v. 30, n. 4 (April 2008).
- (2013): A new approach to the determination of the critical slip surfaces of slopes. In: China Ocean Engineering, v. 27, n. 1 (Februar 2013).
- (2018): Multiscale investigations on hydration mechanisms in seawater OPC paste. In: Construction and Building Materials, v. 191 (Dezember 2018).
Structurae kooperiert mit
