Lei Li 
- (2024): Post-fire mechanical properties of full-grouted sleeve connection with different grouting defects. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- : Study of the factors influencing the life cycle cost of green buildings using SEM-SD method. In: Journal of Asian Architecture and Building Engineering.
- (2023): Novel joint for improving the collapse resistance of steel frame structures in column-loss scenarios. In: Thin-Walled Structures, v. 182 (Januar 2023).
- (2023): The supply and demand of water-related ecosystem services in the Asian water tower and its downstream area. In: Science of The Total Environment, v. 887 (August 2023).
- (2021): Studies on cooling hours and switch temperature of cooling-tower cooling supply in Guizhou typical climate district. In: IOP Conference Series: Earth and Environmental Science, v. 827, n. 1 (1 Juli 2021).
- (2023): Study on dynamic properties of lightweight ultra-high performance concrete (L-UHPC). In: Construction and Building Materials, v. 399 (Oktober 2023).
- (2024): Silica micro powder combined with cement stabilization loess: strength properties, microstructural evolution and reinforcement mechanism. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2023): Research on Fatigue Performance of Shape-Memory Alloy Bars under Low Cyclic Loading. In: Buildings, v. 13, n. 6 (23 Mai 2023).
- (2022): A study of residents’ intentions to participate in the renovation of older communities under the perspective of urban renewal: evidence from Zhangjiakou, China. In: Journal of Asian Architecture and Building Engineering, v. 22, n. 3 (Juli 2022).
- (2022): A Strength Criterion for Deep Rock with Stochastic Fractures via DEM Simulations. In: KSCE Journal of Civil Engineering, v. 27, n. 2 (November 2022).
- (2022): Performance analysis of steel frame joints reinforced against progressive collapse by partially-penetrated butt-welded corrugated steel plates. In: Journal of Constructional Steel Research, v. 198 (November 2022).
- (2022): Pore characteristics of pervious concrete and their influence on permeability attributes. In: Construction and Building Materials, v. 327 (April 2022).
- (2022): Structural behaviour of post-earthquake steel plate shear wall repaired by non-welded oblique stiffeners. In: Structures, v. 39 (Mai 2022).
- (2022): Seismic performance of concrete beams with ends embedded with perforated H-shaped steel and reinforced by engineered cementitious composite. In: Journal of Building Engineering, v. 45 (Januar 2022).
- (2021): Shear Characteristics of the Interface between Recycled Concrete Aggregates and Various Geosynthetics. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): Reactive Procedure for Robust Project Scheduling under the Activity Disruptions. In: KSCE Journal of Civil Engineering, v. 25, n. 9 (Juni 2021).
- (2021): The Stability Factors’ Sensitivity Analysis of Key Rock B and Its Engineering Application of Gob-Side Entry Driving in Fully-Mechanized Caving Faces. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2014): Three-dimensional modeling and simulation of asphalt concrete mixtures based on X-ray CT microstructure images. In: Journal of Traffic and Transportation Engineering (English Edition), v. 1, n. 1 (Februar 2014).
- (2021): Numerical Simulation of Focused Wave Interaction with a Fixed Vertical Cylinder. In: International Journal of Offshore and Polar Engineering, v. 31, n. 1 (1 März 2021).
- (2021): Prediction of residual behaviour for post-earthquake damaged reinforced concrete column based on damage distribution model. In: Engineering Structures, v. 234 (Mai 2021).
- (2019): Reinforcement model considering slip effect. In: Engineering Structures, v. 198 (November 2019).
- (2020): A simple PZT transducer design for electromechanical impedance (EMI)-based multi-sensing interrogation. In: Journal of Civil Structural Health Monitoring, v. 11, n. 1 (September 2020).
- (2020): Performance evaluation of a hybrid solar powered rotary desiccant wheel air conditioning system for low latitude isolated islands. In: Energy and Buildings, v. 224 (Oktober 2020).
- (2013): Study on Production of Autoclaved Aerated Concrete by Coal Gangue Fly Ash. In: Applied Mechanics and Materials, v. 357-360 (August 2013).
- (2020): Topology Optimization of Energy-Dissipating Plastic Structures with Shear Modified Gurson–Tvergaard–Needleman Model. In: Journal of Structural Engineering (ASCE), v. 146, n. 11 (November 2020).
- (2010): Study on the micro-scale simulation of wind field over complex terrain by RAMS/FLUENT modeling system. In: Wind & Structures, v. 13, n. 6 (November 2010).
- (2018): A starch-based admixture for reduction of hydration heat in cement composites. In: Construction and Building Materials, v. 173 (Juni 2018).
- (2019): Orthogonal Experimental Study on Multifactor Conditions for Gas Desorption in Coal. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2015): Performance of cubic convergent methods for implementing nonlinear constitutive models. In: Computers & Structures, v. 156 (August 2015).
- (2013): Review on advances in modeling and simulation of stone-based paving materials. In: Construction and Building Materials, v. 43 (Juni 2013).
Structurae kooperiert mit
