Jun Li 
- (2023): Investigation on Seismic Behavior of Prestressed Steel Strand Composite Reinforced High-Strength Concrete Column. In: Buildings, v. 14, n. 1 (31 Dezember 2023).
- (2024): Investigating the dynamic response of a double-box utility tunnel buried in calcareous sand against ground surface explosion. In: Tunnelling and Underground Space Technology, v. 146 (April 2024).
- (2023): Investigation of Medium-Term Performance of Porous Asphalt and Its Impacts on Tire/Pavement Noise. In: Buildings, v. 14, n. 1 (31 Dezember 2023).
- (2023): The Integrated ANN-NPRT-HUB Algorithm for Rail-Transit Networks of Smart Cities: A TOD Case Study in Chengdu. In: Buildings, v. 13, n. 8 (2 August 2023).
- (2021): Laboratory tests on engineering properties of a new negative-Poisson′s-ratio geobelt. In: Construction and Building Materials, v. 297 (August 2021).
- (2021): Influence of foaming agent on cement and foam concrete. In: Construction and Building Materials, v. 280 (April 2021).
- (2020): Investigation of the Dynamic Performance of a Large-Span Suspension Bridge Influenced by Scouring Based on Vehicle-Bridge Coupled Vibration. In: Shock and Vibration, v. 2020 (Januar 2020).
- (2022): Load-Carrying Capacity Assessment of an Existing Highway Bridge Based on Hybrid Finite-Element Model Updating. In: Journal of Performance of Constructed Facilities (ASCE), v. 36, n. 3 (Juni 2022).
- (2022): Investigation of ultra-high performance concrete slabs under contact explosions with a calibrated K&C model. In: Engineering Structures, v. 255 (März 2022).
- (2021): Life-cycle health monitoring of composite structures using piezoelectric sensor network. In: Smart Materials and Structures, v. 31, n. 1 (23 November 2021).
- (2021): Improving identifiability of structural damage using higher order responses and phase space technique. In: Structural Control and Health Monitoring, v. 28, n. 10 (Juni 2021).
- (2020): In Situ Test and Numerical Analysis of Traffic-Load-Induced Cumulative Settlement of Alluvial Silt After Treatment with Burnt Lime. In: International Journal of Geomechanics, v. 20, n. 2 (Februar 2020).
- (2021): Integrating segmentation and parameter estimation for recreating vertical alignments. In: Computer-Aided Civil and Infrastructure Engineering, v. 36, n. 4 (Februar 2021).
- (2021): Investigations on the response of ceramic ball aggregated and steel fibre reinforced geopolymer-based ultra-high performance concrete (G-UHPC) to projectile penetration. In: Composite Structures, v. 255 (Januar 2021).
- (2020): Investigation of Traffic Loading Effects for Different Codes on Medium- and Small-Span Girder Bridges in China. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2020): Improvement of Defects in ZYFM type oil-water separator. In: IOP Conference Series: Materials Science and Engineering, v. 780 (April 2020).
- (2020): Influence of nano-SiO2 and carbonation on the performance of natural hydraulic lime mortars. In: Construction and Building Materials, v. 235 (Februar 2020).
- (2018): Laboratory investigation of the durability of a new smart geosynthetic material. In: Construction and Building Materials, v. 169 (April 2018).
- (2018): Improving strength of calcinated coal gangue geopolymer mortars via increasing calcium content. In: Construction and Building Materials, v. 166 (März 2018).
- (2019): Influence of human body geometry, posture and the surrounding environment on body heat loss based on a validated numerical model. In: Building and Environment, v. 166 (Dezember 2019).
- (2014): Inspection and evaluation methods on dynamic performance of highway bridges under moving vehicular loads. In: The IES Journal Part A: Civil & Structural Engineering, v. 8, n. 1 (Dezember 2014).
- (2019): Lost data recovery for structural health monitoring based on convolutional neural networks. In: Structural Control and Health Monitoring, v. 26, n. 10 (13 September 2019).
- (2016): Investigation of the properties of high-porosity cement foams based on ternary Portland cement–metakaolin–silica fume blends. In: Construction and Building Materials, v. 107 (März 2016).
- (2017): Investigation of the properties of high-porosity cement foams containing epoxy resin. In: Construction and Building Materials, v. 154 (November 2017).
- (2015): Investigation of ultra-high performance concrete slab and normal strength concrete slab under contact explosion. In: Engineering Structures, v. 102 (November 2015).
- (2014): Laboratory research on effective test area of short-crested waves generated by two-sided segmented wavemakers. In: China Ocean Engineering, v. 28, n. 2 (April 2014).
- (2009): Local Buckling of RBS Beams Subjected to Cyclic Loading. In: Journal of Structural Engineering (ASCE), v. 135, n. 12 (Dezember 2009).
- (2018): Influence of Asphalt Pavement Conditions on Fatigue Damage of Orthotropic Steel Decks: Parametric Analysis. In: Journal of Bridge Engineering (ASCE), v. 23, n. 12 (Dezember 2018).
- (2018): The influence of curing methods on the strength of MSWI bottom ash-based alkali-activated mortars: The role of leaching of OH− and free alkali. In: Construction and Building Materials, v. 186 (Oktober 2018).
- (2015): Investigation of Ultra-High Performance Concrete under Static and Blast Loads. In: International Journal of Protective Structures, v. 6, n. 2 (Juni 2015).
Structurae kooperiert mit
