0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

J. Li ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Yang, Y. B. / Xie, L. T. / Liu, Y. Z. / Li, J. (2024): Analytical solution of ground vibration of a half-space induced by sub- and super-critical harmonic moving loads: Theory and application. In: Soil Dynamics and Earthquake Engineering, v. 187 (Dezember 2024).

    https://doi.org/10.1016/j.soildyn.2024.109019

  2. Nguyen, V. V. / Dackermann, U. / Li, J. / Makki Alamdari, M. / Mustapha, S. / Runcie, P. / Ye, L. (2015): Damage Identification of a Concrete Arch Beam Based on Frequency Response Functions and Artificial Neural Networks. In: Electronic Journal of Structural Engineering, v. 14, n. 1 (Januar 2015).

    https://doi.org/10.56748/ejse.141921

  3. Gravina, R. J. / Li, J. / Aydin, H. / Setunge, S. / Visintin, P. / Smith, S. T. / Al-Mahaidi, R. (2018): Bond Performance of F RP-Strengthened Reinforced Concrete In Aggressive Environmental Conditions. Vorgetragen bei: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.

    https://doi.org/10.1201/9781315189390-33

  4. Chen, H. Y. / Xu, W. L. / Deng, J. / Xue, Y. / Li, J. (2014): Experimental Investigation of Pressure Load Exerted on a Downstream Dam by Dam-Break Flow. In: Journal of Hydraulic Engineering, v. 140, n. 2 (Februar 2014).

    https://doi.org/10.1061/(asce)hy.1943-7900.0000743

  5. Zhang, H. / Li, J. / Peng, T. (2013): Development and Mechanical Performance of a New Kind of Bridge Seismic Isolator for Low Seismic Regions. In: Shock and Vibration, v. 20, n. 4 ( 2013).

    https://doi.org/10.1155/2013/148907

  6. Zhang, Y. F. / Li, J. / Li, W. / Li, J. M. / Liu, H. Y. (2021): Effects of Landslides on the Displacement of a Bridge Pile Group Located on a High and Steep Slope. In: Advances in Civil Engineering, v. 2021 (Januar 2021).

    https://doi.org/10.1155/2021/6683967

  7. Yang, Y. B. / Li, P. L. / Chen, W. / Li, J. / Wu, Y. T. (2021): 2.5D formulation and analysis of a half-space subjected to internal loads moving at sub- and super-critical speeds. In: Soil Dynamics and Earthquake Engineering, v. 142 (März 2021).

    https://doi.org/10.1016/j.soildyn.2020.106550

  8. Li, J. / Hadi, M. N. S. (2003): Behaviour of externally confined high-strength concrete columns under eccentric loading. In: Composite Structures, v. 62, n. 2 (November 2003).

    https://doi.org/10.1016/s0263-8223(03)00109-0

  9. Hadi, M. N. S. / Li, J. (2004): External reinforcement of high strength concrete columns. In: Composite Structures, v. 65, n. 3-4 (September 2004).

    https://doi.org/10.1016/j.compstruct.2003.11.003

  10. Li, J. / Xiang, Z. H. / Xue, M. D. (2005): Buckling analysis of rotationally periodic laminated composite shells by a new multilayered shell element. In: Composite Structures, v. 70, n. 1 (August 2005).

    https://doi.org/10.1016/j.compstruct.2004.08.009

  11. Li, J. / Zhang, Y. X. (2011): Evolution and calibration of a numerical model for modelling of hybrid-fibre ECC panels under high-velocity impact. In: Composite Structures, v. 93, n. 11 (Oktober 2011).

    https://doi.org/10.1016/j.compstruct.2011.05.033

  12. Zhao, D. L. / Li, J. / Zhu, Y. / Zou, L. (2008): The application of a two-dimensional cellular automata random model to the performance-based design of building exit. In: Building and Environment, v. 43, n. 4 (April 2008).

    https://doi.org/10.1016/j.buildenv.2007.01.011

  13. Li, J. / Ostoja-Starzewski, M. (2014): Fractal Shear Bands at Elastic-Plastic Transitions in Random Mohr-Coulomb Materials. In: Journal of Engineering Mechanics (ASCE), v. 140, n. 9 (September 2014).

    https://doi.org/10.1061/(asce)em.1943-7889.0000750

  14. Subhani, M. / Li, J. / Samali, B. / Yan, N. (2013): Determination of the embedded lengths of electricity timber poles utilising flexural wave generated from impacts. In: Australian Journal of Structural Engineering, v. 14, n. 1 ( 2013).

    https://doi.org/10.7158/s12-047.2013.14.1

  15. Dackermann, U. / Li, J. / Samali, B. (2009): Damage Identification in Timber Bridges Utilising the Damage Index Method and Neural Network Ensembles. In: Australian Journal of Structural Engineering, v. 9, n. 2 ( 2009).

    https://doi.org/10.1080/13287982.2009.11465021

  16. Samali, B. / Dowling, D. M. / Li, J. (2008): Dynamic Testing and Analysis of Adobe-Mudbrick Structures. In: Australian Journal of Structural Engineering, v. 8, n. 1 ( 2008).

    https://doi.org/10.1080/13287982.2008.11464987

  17. Samali, B. / Li, J. / Choi, F. C. / Crews, K. (2010): Application of the damage index method for plate-like structures to timber bridges. In: Structural Control and Health Monitoring, v. 17, n. 8 (Dezember 2010).

    https://doi.org/10.1002/stc.347

  18. Li, J. / Zhang, Y. X. (2012): Evaluation of constitutive models of hybrid-fibre engineered cementitious composites under dynamic loadings. In: Construction and Building Materials, v. 30 (Mai 2012).

    https://doi.org/10.1016/j.conbuildmat.2011.11.031

  19. Zhang, X. B. / Aljewifi, H. / Li, J. (2013): Failure behaviour investigation of continuous yarn reinforced cementitious composites. In: Construction and Building Materials, v. 47 (Oktober 2013).

    https://doi.org/10.1016/j.conbuildmat.2013.05.022

  20. Xiao, Y. / Wu, Y. / Li, J. / Yang, R. Z. (2017): An experimental study on shear strength of glubam. In: Construction and Building Materials, v. 150 (September 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.06.005

  21. Li, J. / Moselhi, O. / Alkass, S. (2006): Forecasting Project Status by Using Fuzzy Logic. In: Journal of Construction Engineering and Management, v. 132, n. 11 (November 2006).

    https://doi.org/10.1061/(asce)0733-9364(2006)132:11(1193)

  22. Choi, F. C. / Li, J. / Samali, B. / Crews, K. (2008): Application of the modified damage index method to timber beams. In: Engineering Structures, v. 30, n. 4 (April 2008).

    https://doi.org/10.1016/j.engstruct.2007.07.014

  23. Shen, Y. / McLaughlin, K. L. / Gao, J. / Gray, D. / Shen, L. / Wang, Y. / Li, M. / Berry, D. / Li, J. / Viehland, D. (2012): AC magnetic dipole localization by a magnetoelectric sensor. In: Smart Materials and Structures, v. 21, n. 6 (Juni 2012).

    https://doi.org/10.1088/0964-1726/21/6/065007

  24. Moreu, F. / Jo, H. / Li, J. / Kim, R. E. / Cho, S. / Kimmle, A. / Scola, S. / Le, H. / Spencer, B. F. / LaFave, J. M. (2015): Dynamic Assessment of Timber Railroad Bridges Using Displacements. In: Journal of Bridge Engineering (ASCE), v. 20, n. 10 (Oktober 2015).

    https://doi.org/10.1061/(asce)be.1943-5592.0000726

  25. Chow, W. K. / Li, J. (2007): Evacuation of Atria under Different Uses. In: Journal of Architectural Engineering (ASCE), v. 13, n. 2 (Juni 2007).

    https://doi.org/10.1061/(asce)1076-0431(2007)13:2(78)

  26. Chow, W. K. / Li, J. (2009): Are Two 2-Hour Fire Rated Shutters Equivalent to a 4-Hour Shutter Using ASTM E119?. In: Journal of Architectural Engineering (ASCE), v. 15, n. 2 (Juni 2009).

    https://doi.org/10.1061/(asce)1076-0431(2009)15:2(67)

  27. Wang, J. J. / Song, Y. C. / Wang, W. / Li, J. (2018): Calibrations of numerical models by experimental impact tests using scaled steel boxes. In: Engineering Structures, v. 173 (Oktober 2018).

    https://doi.org/10.1016/j.engstruct.2018.06.100

  28. Li, J. / Du, C. W. / Liu, Z. Y. / Li, X. G. / Liu, M. (2018): Effect of microstructure on the corrosion resistance of 2205 duplex stainless steel. Part 2: Electrochemical noise analysis of corrosion behaviors of different microstructures based on wavelet transform. In: Construction and Building Materials, v. 189 (November 2018).

    https://doi.org/10.1016/j.conbuildmat.2018.07.097

  29. Li, J. / Du, C. W. / Liu, Z. Y. / Li, X. G. / Liu, M. (2018): Effect of microstructure on the corrosion resistance of 2205 duplex stainless steel. Part 1: Microstructure evolution during isothermal aging at 850 °C and evaluation of anticorrosion properties by methods of cyclic potentiodynamic polarization and electr. In: Construction and Building Materials, v. 189 (November 2018).

    https://doi.org/10.1016/j.conbuildmat.2018.08.186

  30. Liu, H. / Zhou, J. / Bun, S. H. / Simmons, G. G. / Bennett, C. R. / Matamoros, A. B. / Li, J. (2018): Effectiveness of Crack-Arrest Holes under Distortion-Induced Fatigue Loading. In: Journal of Bridge Engineering (ASCE), v. 23, n. 2 (Februar 2018).

    https://doi.org/10.1061/(asce)be.1943-5592.0001066

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine