Huihui Li 
- (2024): Experimental investigations on the flexural behavior of UHPC wet joints for UHPC light-weight rigid frame arch bridges. In: Construction and Building Materials, v. 446 (Oktober 2024).
- (2025): Flexural cracking behavior of steel-NC-UHPC composite beam under negative bending moment. In: Engineering Structures, v. 322 (Januar 2025).
- (2024): Numerical Simulations of Abutment PRB Structures with Post-Tensioned Unbonded Prestressing Tendons for Highway Bridges under Horizontal Seismic Loads. In: Journal of Bridge Engineering (ASCE), v. 29, n. 11 (November 2024).
- (2024): Experimental investigations on the flexural behavior of compression-cast seawater sea-sand concrete beams reinforced with CFRP bars. In: Construction and Building Materials, v. 445 (September 2024).
- (2024): Ductile Fracture Prediction Framework of Low Yield Point Steel LYP225 under Monotonic Loading: Experiment and Simulation. In: Journal of Structural Engineering (ASCE), v. 150, n. 6 (Juni 2024).
- (2023): Prediction of shear strength in UHPC beams using machine learning-based models and SHAP interpretation. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2024): A critical review on shear performance of joints in precast Ultra-High-Performance Concrete (UHPC) segmental bridges. In: Engineering Structures, v. 301 (Februar 2024).
- (2024): Reliability evaluation of flexural capacity design provision for UHPC beams reinforced with steel rebars/prestressing tendons. In: Engineering Structures, v. 300 (Februar 2024).
- (2023): Experimental study on the post-tensioned unbonded prestressing UHPC prefabricated retaining blocks for highway bridges. In: Bulletin of Earthquake Engineering, v. 21, n. 14 (Oktober 2023).
- (2023): A real-time spatial deformation estimation method based on spatial curvature decomposition and interpolation. In: Engineering Structures, v. 296 (Dezember 2023).
- (2023): Blast fragility assessment of aging coastal RC columns exposed to non-uniform CIC attacks using LBE function. In: Journal of Building Engineering, v. 71 (Juli 2023).
- (2023): Experimental Study on the Flexural Behavior of a Novel Nonprismatic Prestressed UHPC Composite Box Girder with Corrugated Steel Webs. In: Journal of Bridge Engineering (ASCE), v. 28, n. 7 (Juli 2023).
- (2022): Seismic Fragility Analysis of the Aging RC Columns under the Combined Action of Freeze–Thaw Cycles and Chloride-Induced Corrosion. In: Buildings, v. 12, n. 12 (1 Dezember 2022).
- (2023): Effect of high-strength steel spirals on the seismic behavior of square concrete-filled steel tubular columns under high axial load ratio. In: Engineering Structures, v. 279 (März 2023).
- (2023): Mechanistic understanding of precast UHPC segmental beams with external tendons and epoxy joints subject to combined bending and shear. In: Engineering Structures, v. 280 (April 2023).
- (2023): Behaviour of square concrete-filled steel tubes reinforced with internal latticed steel angles under bending. In: Structures, v. 48 (Februar 2023).
- (2022): Experimental and numerical investigation on the flexural behavior of a large-scale prestressed UHPC T-Shaped girder. In: Engineering Structures, v. 272 (Dezember 2022).
- (2022): A Generalized Framework for the Alternate Load Path Redundancy Analysis of Steel Truss Bridges Subjected to Sudden Member Loss Scenarios. In: Buildings, v. 12, n. 10 (20 September 2022).
- (2023): Performance-Based Retrofits of Long-Span Truss Bridges Based on the Alternate Load Path Redundancy Analysis. In: Journal of Bridge Engineering (ASCE), v. 28, n. 2 (Februar 2023).
- (2022): Alternate Load Paths Redundancy Analysis of Steel Truss Bridges. In: Journal of Bridge Engineering (ASCE), v. 27, n. 11 (November 2022).
- (2022): A Framework for Identification of the Critical Members for Truss Bridges through Nonlinear Dynamic Analysis. In: Journal of Bridge Engineering (ASCE), v. 27, n. 8 (August 2022).
- (2022): Effect of high-strength spirals on eccentric compression behavior of square CFST columns. In: Journal of Constructional Steel Research, v. 196 (September 2022).
- (2022): Axial compressive behaviour of high-strength steel spiral-confined square concrete-filled steel tubular columns. In: Journal of Constructional Steel Research, v. 192 (Mai 2022).
- (2021): Experimental study on seismic performance of new-type fabricated shear wall with mortar connection. In: Journal of Building Engineering, v. 43 (November 2021).
- (2020): Modeling of wedge-pin joint for the dynamic analysis of a planar temporary demountable structure. In: Advances in Structural Engineering, v. 24, n. 5 (November 2020).
- (2020): Improved time-dependent seismic fragility estimates for deteriorating RC bridge substructures exposed to chloride attack. In: Advances in Structural Engineering, v. 24, n. 3 (September 2020).
- (2020): Effects of various modeling uncertainty parameters on the seismic response and seismic fragility estimates of the aging highway bridges. In: Bulletin of Earthquake Engineering, v. 18, n. 14 (August 2020).
- (2020): Investigation on Flooding-Resistant Performance of Integral Abutment and Jointless Bridge. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2020): Seismic fragility assessment framework for highway bridges based on an improved uniform design-response surface model methodology. In: Bulletin of Earthquake Engineering, v. 18, n. 5 (Januar 2020).
- (2016): Seismic Fragility Analysis of Bridge by Combining the Uniform Design Method and Response Surface Method. Vorgetragen bei: IABSE Conference: Bridges and Structures Sustainability - Seeking Intelligent Solutions, Guangzhou, China, 8-11 May 2016.
Structurae kooperiert mit
